How to service and repair the auxiliary temperature blend door actuator on Ford Taurus X?

You must start service and repair of the auxiliary temperature blend door actuator by taking out the LH quarter trim panel first. The electrical connector attachment of the auxiliary temperature blend door actuator needs to be removed first. The three screws fastening the actuator need removal before the actuator can be extracted. The finish-up process for installation requires the reversal of steps that were used for removal.

OEM Ford Taurus X Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Blend Door Actuators found

View related parts
Ford Taurus X Door Actuator, Driver Side Part Number: AA5Z-19E616-C
$28.03 MSRP: $44.51
You Save: $16.48 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Motor Assembly; HVAC Air Inlet Door Actuator, Front Lower; Front; Air Adjustment Control Motor; Right; Left; Vacuum Motor; Adjust Motor; Motor
- Position: Driver Side
- Replaces: 8G1Z-19E616-B, 8G1Z-19E616-C, AA5Z-19E616-B, YH-1778
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus X | Eddie Bauer, Limited, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus X Door Actuator, Front Upper Part Number: AA5Z-19E616-A
$19.29 MSRP: $29.85
You Save: $10.56 (36%)
Product Specifications
- Other Name: Motor Assembly; HVAC Air Inlet Door Actuator, Front Upper; Defrost Mode Door Actuator; Heater Blend Door Actuator; Vacuum Motor; Adjust Motor; Motor
- Position: Front Upper
- Replaces: 7L1Z-19E616-G, 9L3Z-19E616-A, 5F2Z-19E616-AA, 4F2Z-19E616-FA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus X | Eddie Bauer, Limited, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus X Vacuum Motor, Rear Part Number: 5F9Z-19E616-CA
Product Specifications
- Other Name: Motor Assembly; HVAC Defrost Mode Door Actuator; Rear Blend Door Actuator; Heater Blend Door Actuator; Blower Motor; HVAC Blend Door Actuator
- Manufacturer Note: Temperature Blend Door
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus X | Eddie Bauer, Limited, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus X Vacuum Motor, Rear Part Number: 8F9Z-19E616-A
Product Specifications
- Other Name: Motor Assembly; HVAC Floor Mode Door Actuator; Lower, Rear, Air Inlet, Blower, Heater Blend Actuators; Actuator; Blower Motor
- Manufacturer Note: Air Distribution Mode Door
- Position: Rear
- Replaces: 5F9Z-19E616-CB, 5F9Z-19E616-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus X | Eddie Bauer, Limited, SEL | 6 Cyl 3.5 L GAS

Ford Taurus X Blend Door Actuator

OEM Blend Door Actuator boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Blend Door Actuator with long life and a perfect fit. Come to our website and find genuine Ford Taurus X parts. We keep a wide inventory of OEM Taurus X parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Taurus X Blend Door Actuator Parts and Q&A

Door Actuator, Front Upper
AA5Z-19E616-A
Q: How to service and repair the auxiliary temperature blend door actuator on Ford Taurus X?
A:
You must start service and repair of the auxiliary temperature blend door actuator by taking out the LH quarter trim panel first. The electrical connector attachment of the auxiliary temperature blend door actuator needs to be removed first. The three screws fastening the actuator need removal before the actuator can be extracted. The finish-up process for installation requires the reversal of steps that were used for removal.