How to remove and install the engine mount on Ford Taurus X?

In order to access the engine mount, disconnect the exhaust flexible pipe, place a floor jack and take away the coolant degas bottle. Removal of engine mount brace, nuts, bolts and studs. To install, clean holes, mount and screw in all parts to the required torque settings then refit the coolant bottle and exhaust pipe.

OEM Ford Taurus X Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Engine Mounts found

View related parts
Ford Taurus X Transmission Mount, Front Upper Part Number: DG1Z-6038-F
$66.30 MSRP: $96.50
You Save: $30.20 (32%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Automatic Transmission Mount, Front Upper; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Upper Trans Mount
- Position: Front Upper
- Replaces: DG1Z-6038-D, 8G1Z-6038-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus X | Eddie Bauer, Limited, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus X Torsion Arm, Lower Part Number: 9G1Z-6068-A
$42.16 MSRP: $61.37
You Save: $19.21 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing; Automatic Transmission Mount, Lower; Engine Support Rod; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Lower Mount; Lower Trans Mount; Transmission Mount
- Position: Lower
- Replaces: 8G1Z-6068-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus X | Eddie Bauer, Limited, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus X Front Mount Part Number: 8G1Z-6038-A
$76.38 MSRP: $111.18
You Save: $34.80 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Front; Engine Mount Bracket; Motor Mount; Mount; Insulator
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus X | Eddie Bauer, Limited, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus X Mount Bracket, Front Passenger Side Part Number: 8M8Z-6038-A
$63.73 MSRP: $97.90
You Save: $34.17 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Front Engine Mount Support; Right Engine Mount Bracket; Torque Strut; Motor Mount.; Engine Bracket; Front Mount; Front Mount Bracket; Support; Mount
- Manufacturer Note: Bracket
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus X | Eddie Bauer, Limited, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus X Mount Bracket, Upper Part Number: 8G1Z-6031-A
$51.90 MSRP: $74.25
You Save: $22.35 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Automatic Transmission Mount; Transfer Case Mount; Motor Mount; Transmission Mount Bracket; Transmission Mount
- Position: Upper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus X | Eddie Bauer, Limited, SEL | 6 Cyl 3.5 L GAS

Ford Taurus X Engine Mount

Welcome to our website where you can discover high-quality, genuine Ford Taurus X Engine Mount. We offer an extensive inventory of OEM Ford Taurus X Engine Mount at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Taurus X Engine Mount Parts and Q&A

Torsion Arm, Lower
9G1Z-6068-A
Q: How to remove and install the engine mount on Ford Taurus X?
A: In order to access the engine mount, disconnect the exhaust flexible pipe, place a floor jack and take away the coolant degas bottle. Removal of engine mount brace, nuts, bolts and studs. To install, clean holes, mount and screw in all parts to the required torque settings then refit the coolant bottle and exhaust pipe.