F-250 Super Duty | 2017-2024 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
F-350 Super Duty | 2017-2024 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
Q: How to service the RH halfshaft Wheel Seal on the MTX75 on Ford Focus?
A: The RH halfshaft seal service requires the MTX75 to be situated in NEUTRAL gear on a hoist. The mechanic should remove both the RH halfshaft and intermediate shaft assembly piece from the vehicle. The combination of Pilot Bearing Remover and Halfshaft Oil Seal Remover should be used to remove and discard the old halfshaft oil seal. To perform the installation fit the new halfshaft oil seal using the Halfshaft Oil Seal Installer followed by reinstallation of the RH halfshaft and intermediate shaft assembly. Before checking transaxle fluid level it is best to remove the transaxle fluid filler plug to determine how much fluid needs to be added until it reaches a fill height between 0.0-5.0 mm (0.0-0.2 in) below the filler hole lower edge. Manual transmission fluid should be added to reach the specified level and the tightening torque should be set to 35 Nm (26 lb-ft).