Manufacturer Note: For rear drum brakes refer to basic 1126 , Painted for lacy spoke alum. wheels
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
1995-2003 Ford Windstar | 3.0L, Base, GL, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
Ford Windstar Brake Disc
Welcome to our website where you can discover high-quality, genuine Ford Windstar Brake Disc. We offer an extensive inventory of OEM Ford Windstar Brake Disc at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Ford Windstar Brake Disc Parts Questions & Experts Answers
Q: How to Service and Repair the Brake Disc on Ford Windstar?
A: Service and repair of the brake rotor/disc requires starting by removing the front disc brake caliper anchor plate. Use a marker to connect the brake disc lug hole and wheel stud for maintaining the best front brake disc runout when reassembling. Brake disc bolts need removal as the next step. A Total Indicated Runout measurement for the brake disc should be performed just before you install the component when excessive force was needed to remove it. The removal of hard-to-remove brake disc requires application of Rust Penetrant F2AZ-19A501-A or an equivalent system that fulfills Ford specification ESR-M99C56-A on brake disc hub mating areas. The installation process requires metal brake part cleaner F3AZ-19579-SA equivalent to Ford specification ESE-M1C171-A for cleaning brake disc and wheel hub surfaces then high temperature nickel brake lubricant F6AZ-9L494-AA equivalent to Ford specification ESE-M12A4-A should be applied to hub flanges. Place the brake disc in position with marks facing their counterparts on the hub and then assemble brake disc bolts and the front disc brake caliper anchor plate. Perform an inspection of Total Indicated Runout (TIR) as the final check.