Other Name: Control; Interior Door Handle, Front Right Inner, Rear Right Inner; Interior Door Handle
Manufacturer Note: Handle Attaches To The Window Regulator Assembly
Position: Front Inner Passenger Side
Replaces: 7L1Z-7821818-A
Fits the following Lincoln Models:
Navigator | 2007-2017 | Base, L, L Luxury, L Reserve, L Select, L Ultimate, Luxury, Reserve, Select, Ultimate | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Other Name: Control; Interior Door Handle, Front Left Inner, Rear Left Inner; Interior Door Handle
Manufacturer Note: Handle Attaches To The Window Regulator Assembly
Position: Front Inner Driver Side
Replaces: 7L1Z-7821819-A
Fits the following Lincoln Models:
Navigator | 2007-2017 | Base, L, L Luxury, L Reserve, L Select, L Ultimate, Luxury, Reserve, Select, Ultimate | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Other Name: Handle Assembly - Door - Inner; Interior Door Handle
Position: Upper
Fits the following Lincoln Models:
Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Other Name: Handle Assembly - Door Outer; Exterior Door Handle
Position: Driver Side
Fits the following Lincoln Models:
Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Other Name: Handle Assembly - Door - Inner; Interior Door Handle
Position: Upper
Fits the following Lincoln Models:
Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Other Name: Handle Assembly - Door Outer; Exterior Door Handle
Position: Passenger Side
Replaces: LC5Z-7822404-AA
Fits the following Lincoln Models:
Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Other Name: Handle Assembly - Door Outer; Exterior Door Handle
Position: Passenger Side
Replaces: LC5Z-7826604-AA
Fits the following Lincoln Models:
Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Other Name: Handle Assembly - Door Outer; Exterior Door Handle; Handle Assembly - Door - Outer
Manufacturer Note: Paint to match
Position: Passenger Side
Fits the following Lincoln Models:
MKZ | 2017-2020 | Base, Black Label, Black Label Hybrid, Hybrid, Premiere, Premiere Hybrid, Reserve, Reserve Hybrid, Reserve I, Reserve I Hybrid, Reserve II, Reserve II Hybrid, Select, Select Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
Q: How to service and repair the rear interior door handle on Lincoln MKZ?
A: The first step to handle repair in the rear interior door is to remove the trim panel from the rear door. The first step requires removing the screw which fastens the interior rear door handle. The first step is to disconnect the actuating cable of the rear door interior door handle before removing the interior door handle. The installation of the new handle follows the opposite steps from removal.
Q: How to service and repair the exterior front door handle on Lincoln Navigator?
A: Service and repair of the exterior front door handle requires the front door window glass to be completely raised. The first step requires removal of the front door trim panel followed by placement of the watershield to the side. The exterior door handle actuating rod should be detached by opening the clip. The same process should be used to detach the door lock cylinder actuating rod when required from the lock cylinder. After pushing the exterior door handle outward from the bottom you can remove the two attaching nuts at the base of the handle. The installation requires tightening these nuts to 9 Nm (80 lb-in). Before fastening clips ensure both the door handle and front door handle rod are in relaxed state with the rod completely raised and reverse the uninstallation process for finish installation.
Q: How to service the exterior rear door handle on Lincoln Town Car?
A: Service of the exterior rear door handle begins by taking out the rear door trim panel while moving the watershield to a safe spot. The first step involves opening the clip to separate the exterior door handle actuating rod before taking out the two nuts responsible for securing the exterior door handle. Tighten both nuts of the new handle installation until they reach 7 Nm (62 lb-in) torque then reverse the removal steps to finish the installation.