Continental | 2017-2020 | 80th Anniversary Coach Door Edition, Base, Black Label, Coach Door Edition, Livery, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
Continental | 2017-2020 | 80th Anniversary Coach Door Edition, Base, Black Label, Coach Door Edition, Livery, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
Continental | 2017-2020 | 80th Anniversary Coach Door Edition, Base, Black Label, Coach Door Edition, Livery, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
Continental | 2017-2020 | 80th Anniversary Coach Door Edition, Base, Black Label, Coach Door Edition, Livery, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
MKZ | 2017-2020 | Base, Black Label, Black Label Hybrid, Hybrid, Premiere, Premiere Hybrid, Reserve, Reserve Hybrid, Reserve I, Reserve I Hybrid, Reserve II, Reserve II Hybrid, Select, Select Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
| Page 1 of 138 |Next >
1-20 of 2743 Results
Lincoln Seat Cover Parts Questions & Experts Answers
Q: How to service the rear seat cover on Lincoln MKZ?
A: Begin the service process of the rear seat cushion cover by taking out the rear seat cushion first. Remove the drawstring before taking out the hog rings from each other. Cautious handling of the separation process between backrest trim cover and hook and loop strip prevents damage to the pad surface of the backrest foam. Detach half the trim cover while letting the hook and loop strips free until they reach the hog rings. After discarding the hog rings you should proceed to completely detach the trim cover from the foam pad by releasing additional hook and loop strips. The installation of the new cover begins by following the opposite steps of removal then placing back the rear seat cushion.
Q: How to Service the Rear Seat Cover on Lincoln LS?
A: Service of the rear seat cushion cover begins with using a suitable tool to release the mini-buckle. Release the two levers situated at the lower outboard edges of the seat cushion before lifting and pulling the cushion out. The seat cushion requires the disconnection of heated electric connections from both upper sides. Remove the seat cushion protecting it as you take off every item attached to the outer trim cover with hog rings. Due care should be used when pulling upholstery from hook and loop straps since it may tear the foam pad; finally pull the fasteners apart. You should first detach all hog rings from the internal cover before you extract the seat cushion trim cover. The reverse sequence used in removal will finalize the process.
Q: How to Service and Repair the Third-Row Seat Cover on Lincoln Navigator?
A: Begin the repair process of the third-row seat cushion cover by unloading the damaged seat initially. Push up the cushion to let go the hook-and-loop fasteners as well as J-clips before taking off the trim cover and foam pad from the cushion structure. Caution must be taken during cushion trim cover removal from the hook-and-loop strip to prevent tearing the cover from the cushion foam pad. Flipping over the trim cover allows you to access the hog rings along its edge for removal which enables you to separate the whole trim cover piece. The correct method for installing the new cover includes performing the opposite steps of removal.