How to service and repair the ignition switch on Lincoln Navigator?

You should initiate ignition switch servicing by taking off the steering wheel. Users can lower the tilt release handle to reach the second screw which allows them to remove the lower steering column shroud including its screws. The removal process requires the screw behind the multi-function switch to be taken out before the upper steering column shroud can be detached. The first action involves removing a bolt then pushing the release before pulling the multi-function switch to the side. As the first step disconnect the electrical connector from the ignition switch before removing it. Reinstall the spring beneath the ignition switch on the lock rod of the steering column during installation according to the reverse process order.

How to service and repair the ignition switch on Lincoln Town Car?

The procedure of servicing and repairing the ignition switch begins with discharging the supplemental restraint system (SRS). Position the ignition switch lock cylinder to RUN before using the suitable tool to push the cylinder release tab upward followed by removing the lock cylinder outward. Start with removing the steering wheel tilt lever and handle before releasing the upper steering column shroud by pressing the sides in. Tighten the three screws that secure the upper and lower steering column shrouds to 2 Nm (18 inch lbs.) after reinstalling them. Start by disconnecting the electrical connector from the ignition switch followed by ignition switch screw removal and pulling out the switch unit before installation when the switch requires torque of 5 Nm (44 inch lbs.). The last step includes reversing the removal sequence while enabling power for the supplemental restraint system (SRS).

OEM Lincoln Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Ignition Switches found

View related parts
Lincoln Ignition Switch Part Number: F29Z-11572-D
$27.48 MSRP: $43.64
You Save: $16.16 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Ignition; Ignition Starter Switch
Fits the following Lincoln Models:
- Continental | 1984-1987 | Base, Givenchy, Valentino | 6 Cyl 2.4 L DIESEL, 8 Cyl 5.0 L GAS
- Mark VII | 1984-1989 | Base, Bill Blass, LSC, Versace | 6 Cyl 2.4 L DIESEL, 8 Cyl 5.0 L GAS
- Town Car | 1984-1989 | Base, Cartier, Signature, Signature SE | 8 Cyl 5.0 L GAS
View More
View related parts
Lincoln Ignition Switch Part Number: 5W1Z-11572-AA
$42.02 MSRP: $66.73
You Save: $24.71 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Ignition
Fits the following Lincoln Models:
- Navigator | 2007-2012 | Base, L, L Luxury, L Ultimate, Luxury, Ultimate | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
- Town Car | 2005-2011 | Designer Series, Executive, Executive L, Protection Series, Signature, Signature L, Signature Limited | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Lincoln Ignition Switch Part Number: DG9Z-11572-A
$65.75 MSRP: $108.18
You Save: $42.43 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Ignition; Ignition Starter Switch; Ignition Lock Cylinder
- Replaces: 98AZ-11572-A, YS4Z-11572-AC, SW-6343
Fits the following Lincoln Models:
- Aviator | 2003-2005 | Base | 8 Cyl 4.6 L GAS
- MKS | 2009-2016 | Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
- MKX | 2007-2015 | Base | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
- MKZ | 2007-2012 | Base, Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
- Mark LT | 2006-2008 | Base | 8 Cyl 5.4 L GAS
- Navigator | 2012-2014, 2003-2006 | Base, L, Luxury, Ultimate | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
- Zephyr | 2006 | Base | 6 Cyl 3.0 L GAS
View More
View related parts
Lincoln Ignition Switch Part Number: E7DZ-11572-A
$9.66 MSRP: $13.37
You Save: $3.71 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Ignition
- Manufacturer Note: REFER TO GROUP 14A411 FOR MATING WIRE ASY.
Fits the following Lincoln Models:
- Continental | 1988 | Base, Signature | 6 Cyl 3.8 L GAS
View related parts
Lincoln Power Switch Part Number: GD9Z-10B776-AA
$57.25 MSRP: $83.33
You Save: $26.08 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Solenoid Control; Ignition Switch; Start Button
Fits the following Lincoln Models:
- Continental | 2017-2020 | 80th Anniversary Coach Door Edition, Base, Black Label, Coach Door Edition, Livery, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
- Navigator | 2018 | Black Label, L Black Label, L Reserve, L Select, Premiere, Reserve, Select | 6 Cyl 3.5 L GAS
View related parts
Lincoln Power Switch Part Number: FL7Z-10B776-AA
$46.60 MSRP: $66.67
You Save: $20.07 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Solenoid Control; Ignition Switch; Start Button
- Manufacturer Note: Switch - Start/Stop
Fits the following Lincoln Models:
- Navigator | 2015-2017 | Base, L, L Reserve, L Select, Reserve, Select | 6 Cyl 3.5 L GAS
View related parts
Lincoln Start Button Part Number: NL7Z-10B776-AA
$57.25 MSRP: $83.33
You Save: $26.08 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Solenoid Control
Fits the following Lincoln Models:
- Navigator | 2022-2024 | Base, Black Label, L Base, L Black Label, L Livery, L Reserve, Reserve | 6 Cyl 3.5 L GAS
View related parts
Lincoln Power Switch Part Number: LJ7Z-10B776-AA
$57.25 MSRP: $83.33
You Save: $26.08 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Solenoid Control; Ignition Switch; Start Button
Fits the following Lincoln Models:
- Corsair | 2020-2023 | Base, Grand Touring, Reserve | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Lincoln Power Switch Part Number: LC5Z-10B776-AA
$57.25 MSRP: $83.33
You Save: $26.08 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Solenoid Control; Ignition Switch; Start Button
Fits the following Lincoln Models:
- Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Lincoln Switch Housing Part Number: BT4Z-12A145-A
$89.31 MSRP: $130.00
You Save: $40.69 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Ignition Impulse Counter; Switch; Switch - Ignition Impulse Counting
- Manufacturer Note: Ignition Lock Service Asy.
- Replaces: 8A5Z-12A145-A
Fits the following Lincoln Models:
- MKS | 2009-2012 | Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
- MKX | 2011-2015 | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln Ignition Switch Part Number: F8LZ-11572-AA
Product Specifications
- Other Name: Switch Assembly - Ignition
- Replaces: F7LZ-12A145-AH, F7LZ-11572-AA
Fits the following Lincoln Models:
- LS | 2000-2006 | Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
- Mark VIII | 1997-1998 | Base, LSC | 8 Cyl 4.6 L GAS
View related parts
Lincoln Ignition Switch Part Number: F4DZ-11572-B
$48.35 MSRP: $75.45
You Save: $27.10 (36%)
Product Specifications
- Other Name: Switch Assembly - Ignition
Fits the following Lincoln Models:
- Blackwood | 2002 | Base | 8 Cyl 5.4 L GAS
- Continental | 1994-2002 | Anniversary, Base, Diamond Anniversary, Executive, Signature, Spinnaker Edition | 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS
- Mark VIII | 1993-1996 | Anniversary, Base, LSC | 8 Cyl 4.6 L GAS
- Navigator | 1998-2002 | Base | 8 Cyl 5.4 L GAS
- Town Car | 1990-2004 | Anniversary, Base, Cartier, Cartier L, Cypress, Executive, Executive L, Executive Protection Series, Jack Nicklaus, Protection Series, Signature, Touring Edition, Tournament Edition, Ultimate, Ultimate L | 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View More
View related parts
Lincoln Ignition Switch Part Number: F5OZ-19A438-BB
Product Specifications
- Other Name: Switch Assembly - Ignition
- Manufacturer Note: U/8500 GVW
Fits the following Lincoln Models:
- Continental | 1996-2002 | Anniversary, Base, Spinnaker Edition | 8 Cyl 4.6 L GAS
View related parts
Lincoln Ignition Switch Part Number: F2UZ-11572-C
Product Specifications
- Other Name: Switch Assembly - Ignition
Fits the following Lincoln Models:
- Mark VII | 1990-1992 | Bill Blass, LSC | 8 Cyl 5.0 L GAS
View related parts
Lincoln Power Switch Part Number: JL7Z-10B776-AA
$46.60 MSRP: $66.67
You Save: $20.07 (31%)
Product Specifications
- Other Name: Switch Assembly - Solenoid Control; Ignition Switch; Start Button
Fits the following Lincoln Models:
- Navigator | 2018-2023 | Base, Black Label, L Base, L Black Label, L Livery, L Reserve, L Select, Premiere, Reserve, Select | 6 Cyl 3.5 L GAS

Lincoln Ignition Switch

If you own Lincoln and want to keep it in top shape, choosing OEM Ignition Switch is a smart move. They are precisely engineered and follow strict factory standards. They are made in advanced facilities that use cutting edge technology. Each part goes through thorough testing to confirm strength and safety, so you can trust it. FordPartsDeal.com gives you genuine Lincoln Ignition Switch at some of the affordable online prices without cutting quality. Every OEM Lincoln part includes the manufacturer's warranty, easy returns, and super-fast delivery. So why wait? Shop now and get your vehicle back to peak condition.

The Lincoln Ignition Switch is located behind the key slot or start button that then sends power to the components, coils, and the starter that transforms potential into motion. In-house cabins of the modern type fill the noise outside with triple door seals, acoustical glass, and active noise control, allowing conversation to take place at library volume at highway velocity. The philosophy of the Quiet Flight of the brand also influences airflow to pass past wind and reduce fatigue. Simple steering wheel buttons are paired with digital clusters to keep the eyes forward, whereas the Co-Pilot 360 package keeps an eye on the lanes and finds cars lurking in the rearview mirror and parks you with subtle bumps. Optional ActiveGlide provides active hands-free operation on charted highways, making the long haul easier but not lapsing with camera checks. Soft leather, actual wood, and user-friendly screens ensure that all reaches are brief and every command easy to understand, and in the process, a first-time driver will have the confidence to go up to the next Ignition Switch in no time. Replace Ignition Switch with patience and a Phillips head. Unplug the battery to retain sparks, Lincoln chrome, and pry the steering shroud open. Turn the key to ACC such that the lock pin is relaxed, detach the wiring harness and screw back out. Insert the weary switch out of its cradle in Lincoln, observe the position of the shaft, and shift the lock cylinder. Install the new Lincoln Ignition Switch until the detent clicks, screw it tight, connect the harness, trim it, reconnect, and enjoy a fast Lincoln start time.

Lincoln Ignition Switch Parts and Q&A

Ignition Switch
DG9Z-11572-A
Q: How to service and repair the ignition switch on Lincoln Navigator?
A:
You should initiate ignition switch servicing by taking off the steering wheel. Users can lower the tilt release handle to reach the second screw which allows them to remove the lower steering column shroud including its screws. The removal process requires the screw behind the multi-function switch to be taken out before the upper steering column shroud can be detached. The first action involves removing a bolt then pushing the release before pulling the multi-function switch to the side. As the first step disconnect the electrical connector from the ignition switch before removing it. Reinstall the spring beneath the ignition switch on the lock rod of the steering column during installation according to the reverse process order.
Ignition Switch
5W1Z-11572-AA
Q: How to service and repair the ignition switch on Lincoln Town Car?
A:
The procedure of servicing and repairing the ignition switch begins with discharging the supplemental restraint system (SRS). Position the ignition switch lock cylinder to RUN before using the suitable tool to push the cylinder release tab upward followed by removing the lock cylinder outward. Start with removing the steering wheel tilt lever and handle before releasing the upper steering column shroud by pressing the sides in. Tighten the three screws that secure the upper and lower steering column shrouds to 2 Nm (18 inch lbs.) after reinstalling them. Start by disconnecting the electrical connector from the ignition switch followed by ignition switch screw removal and pulling out the switch unit before installation when the switch requires torque of 5 Nm (44 inch lbs.). The last step includes reversing the removal sequence while enabling power for the supplemental restraint system (SRS).