Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2010-2012 Lincoln MKS | EcoBoost | 6 Cyl 3.5 L GAS
Lincoln MKS A/C Hose
Welcome to our website where you can discover high-quality, genuine Lincoln MKS A/C Hose. We offer an extensive inventory of OEM Lincoln MKS A/C Hose at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Lincoln MKS A/C Hose Parts Questions & Experts Answers
Q: How to Service and Repair the A/C Hose Manifold and Tube Assembly on Lincoln MKS?
A: The service of the Thermostatic Expansion Valve Manifold and Tube Assembly starts with a refrigerant recovery procedure. First remove the four nuts on the cross vehicle beam then take off the beam while tightening the nuts to 30 Nm (22 lb-ft) before reinstalling it. The first step is to detach the Evaporative Emission (EVAP) Canister Purge Valve followed by removing the evaporator outlet line fitting nut then you should disconnect the fitting while disposing of the O-ring seal and gasket seal before tightening the fitting to 15 Nm (133 lb-in). To disconnect the fitting proceed with removing the evaporator inlet line fitting bracket bolt and the inlet line fitting nut while discarding both O-ring seal and gasket seal then tighten the fitting to 15 Nm (133 lb-in). Replace the TXV manifold and tube bracket bolt by tightening it to 9 Nm (80 lb-in) after installation. The technician should disconnect the fitting by removing its bolt then discarding the O-ring seals according to the installation torque of 8 Nm (71 lb-in). Reassemble everything while installing the TXV manifold by placing new gaskets along with O-rings in place and fill the system with appropriate clean PAG oil quantities. Evacuate then perform a leak test and complete charging the refrigerant system as the final step.