How to remove and install the engine mount on Lincoln MKS?

The first step to remove the engine mount involves taking off the exhaust flexible pipe. Position a floor jack together with the Oil Pan Holding Fixture under the oil pan making sure the fixture matches with the mounting bosses while maintaining caution against any potential damage. The first step requires removal of the engine coolant degas bottle while the second step involves detaching the wiring harness retainer from the engine mount bracket stud bolt and subsequent removal of the nut and bolt and engine mount brace. After properly removing the four engine mount nuts along with the four engine mount studs it is essential to detach the three bolts and the engine mount from its position. The front cover engine mount stud holes should receive pressurized air cleaning for debris removal before installing the engine mount along with the three bolts while keeping them loose. After cleaning the engine mount studs along with fresh studs apply new thread sealer before screwing in the four engine mount studs which need to be torqued to 20 Nm (177 lb-in). Crank the engine mount bolts which number three to 90 Nm (66 lb-ft) tension while the four engine mount nuts require a torque of 63 Nm (46 lb-ft). The complete installation procedure includes tightening the engine mount brace along with its bolt and nut to 20 Nm (177 lb-in). Subsequently install the wiring harness retainer to the engine mount bracket stud bolt before reattaching the engine coolant degas bottle and the exhaust flexible pipe.

OEM Lincoln MKS Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Engine Mounts found

View related parts
Lincoln MKS Motor Mount, Front
Part Number: DG1Z-6038-E
$107.56 MSRP: $156.57
You Save: $49.01 (32%)
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Front Support; Engine Mount, Front; Engine Mount Bracket; Front Mount; Mount
- Position: Front
- Replaces: DG1Z-6038-C, DG1Z-6038-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Lincoln MKS | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Transmission Mount
Part Number: GB5Z-6068-A
$49.08 MSRP: $70.22
You Save: $21.14 (31%)
ADD TO CART
Product Specifications
- Other Name: Housing; Engine Support Rod; Engine Mount Torque Strut; Transfer Case Mount; Motor Mount; Torque Arm; Torsion Arm
- Manufacturer Note: Rear
- Replaces: AA5Z-6068-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2016 Lincoln MKS | EcoBoost | 6 Cyl 3.5 L GAS
View related parts
Lincoln MKS Transmission Mount, Front Upper
Part Number: DG1Z-6038-F
$66.30 MSRP: $96.50
You Save: $30.20 (32%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Automatic Transmission Mount, Front Upper; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Upper Trans Mount
- Position: Front Upper
- Replaces: DG1Z-6038-D, 8G1Z-6038-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2016 Lincoln MKS | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Torsion Arm, Lower
Part Number: 9G1Z-6068-A
$42.90 MSRP: $61.37
You Save: $18.47 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing; Automatic Transmission Mount, Lower; Engine Support Rod; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Lower Mount; Lower Trans Mount; Transmission Mount
- Position: Lower
- Replaces: 8G1Z-6068-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2012 Lincoln MKS | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Transmission Mount, Front Lower
Part Number: AA5Z-6068-B
$73.58 MSRP: $107.10
You Save: $33.52 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Automatic Transmission Mount, Lower; Engine Support Rods; Engine Mounts; Transfer Case Mount; Lower Trans Mount; Torsion Damper
- Position: Front Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2016 Lincoln MKS | EcoBoost | 6 Cyl 3.5 L GAS
View related parts
Lincoln MKS Front Mount
Part Number: AA5Z-6038-D
$87.95 MSRP: $128.02
You Save: $40.07 (32%)
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Front Support; Engine Mount, Front; Engine Mount Bracket; Motor Mount; Mount
- Position: Front
- Replaces: AA5Z-6038-A, AA5Z-6038-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2016 Lincoln MKS | EcoBoost | 6 Cyl 3.5 L GAS
View related parts
Lincoln MKS Transmission Mount, Upper
Part Number: AA5Z-6038-B
$101.14 MSRP: $147.22
You Save: $46.08 (32%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Automatic Transmission Mount, Upper; Transfer Case Mount; Upper Trans Mount
- Position: Upper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2016 Lincoln MKS | EcoBoost | 6 Cyl 3.5 L GAS
View related parts
Lincoln MKS Front Mount
Part Number: 8G1Z-6038-A
$76.38 MSRP: $111.18
You Save: $34.80 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Front; Engine Mount Bracket; Motor Mount; Mount; Insulator
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2012 Lincoln MKS | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Mount Bracket, Front Passenger Side
Part Number: 8M8Z-6038-A
$63.73 MSRP: $97.90
You Save: $34.17 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Front Engine Mount Support; Right Engine Mount Bracket; Torque Strut; Motor Mount.; Engine Bracket; Front Mount; Front Mount Bracket; Support; Mount
- Manufacturer Note: Bracket
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2016 Lincoln MKS | Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Mount Bracket, Upper
Part Number: 8G1Z-6031-A
$51.90 MSRP: $74.25
You Save: $22.35 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Automatic Transmission Mount; Transfer Case Mount; Motor Mount; Transmission Mount Bracket; Transmission Mount
- Position: Upper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2016 Lincoln MKS | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Front Mount
Part Number: DA5Z-6038-A
$131.87 MSRP: $203.50
You Save: $71.63 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Front Support; Engine Mount; Engine Mount Bracket; Motor Mount; Mount
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Lincoln MKS | EcoBoost | 6 Cyl 3.5 L GAS

Lincoln MKS Engine Mount

Welcome to our website where you can discover high-quality, genuine Lincoln MKS Engine Mount. We offer an extensive inventory of OEM Lincoln MKS Engine Mount at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Lincoln MKS Engine Mount Parts Questions & Experts Answers

Transmission Mount, Front Upper
DG1Z-6038-F
Q: How to remove and install the engine mount on Lincoln MKS?
A: The first step to remove the engine mount involves taking off the exhaust flexible pipe. Position a floor jack together with the Oil Pan Holding Fixture under the oil pan making sure the fixture matches with the mounting bosses while maintaining caution against any potential damage. The first step requires removal of the engine coolant degas bottle while the second step involves detaching the wiring harness retainer from the engine mount bracket stud bolt and subsequent removal of the nut and bolt and engine mount brace. After properly removing the four engine mount nuts along with the four engine mount studs it is essential to detach the three bolts and the engine mount from its position. The front cover engine mount stud holes should receive pressurized air cleaning for debris removal before installing the engine mount along with the three bolts while keeping them loose. After cleaning the engine mount studs along with fresh studs apply new thread sealer before screwing in the four engine mount studs which need to be torqued to 20 Nm (177 lb-in). Crank the engine mount bolts which number three to 90 Nm (66 lb-ft) tension while the four engine mount nuts require a torque of 63 Nm (46 lb-ft). The complete installation procedure includes tightening the engine mount brace along with its bolt and nut to 20 Nm (177 lb-in). Subsequently install the wiring harness retainer to the engine mount bracket stud bolt before reattaching the engine coolant degas bottle and the exhaust flexible pipe.