How to service the Wiper Pivot and mounting arm assembly on Lincoln MKS?

Removal of the cowl panel grille without unattached wiper motor linkage is a requirement in order to service the wiper mounting arm and pivot shaft assembly. Unscrew 3 bolts, un-solder the electrical connector, and pull off the wire harness. Installation To install, place the new assembly, reconnect the electrical connector and tighten the bolts to 8 Nm. Reinstall the grille.

OEM Lincoln MKS Wiper Pivot

Windshield Wiper Pivot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Pivots found

View related parts
Lincoln MKS Wiper Transmission Part Number: DG1Z-17566-A
$138.55 MSRP: $201.67
You Save: $63.12 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm And Pivot Shaft Assembly; Windshield Wiper Linkage; Wiper Linkage; Linkage
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Lincoln MKS | Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Wiper Transmission Part Number: 8G1Z-17566-A
Product Specifications
- Other Name: Arm And Pivot Shaft Assembly; Windshield Wiper Linkage; Wiper Linkage; Linkage
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2012 Lincoln MKS | Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS

Lincoln MKS Wiper Pivot

Welcome to our website where you can discover high-quality, genuine Lincoln MKS Wiper Pivot. We offer an extensive inventory of OEM Lincoln MKS Wiper Pivot at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Lincoln MKS Wiper Pivot Parts and Q&A

Wiper Transmission
8G1Z-17566-A
Q: How to service the Wiper Pivot and mounting arm assembly on Lincoln MKS?
A: Removal of the cowl panel grille without unattached Wiper Motor linkage is a requirement in order to service the wiper mounting arm and pivot shaft assembly. Unscrew 3 bolts, un-solder the electrical connector, and pull off the wire harness. Installation To install, place the new assembly, reconnect the electrical connector and tighten the bolts to 8 Nm. Reinstall the grille.