How to remove and replace the front shock absorber and spring assembly on Lincoln MKZ?

You must start the front shock absorber and spring assembly replacement by removing the three upper mount nuts on the discarding step and using an exact replacement part with the same part number because suspension fasteners determine both vehicle performance and safety. Twenty metric units of torque (22 foot-pounds) should be applied for tightening the new nuts. Install the vehicle onto a hoist in NEUTRAL position before you remove the brake line bracket bolt and place the brake line securely out of the way. Reinstall this line and secure it with 23 Nm (17 ft. lbs. Of torque). During wheel speed sensor bolt and harness bolt removal keep the sensor on a safe side and reinstall them by tightening both bolts to 23 Nm (17 ft. lbs.). A proper jack supports the wheel knuckle at its lower ball joints before you uninstall the stabilizer bar link upper nut. The new nut requires a torque of 40 Nm (30 ft. lbs.) when you reinstall it. The procedure then necessitates shock absorber lower bolt and flag nut removal along with damper removal before discarding the bolts and flag nuts and installing the new bolt to 103 Nm (76 ft. lbs.) torque while the suspension remains at bushing fastener tightening position. While disassembling the shock absorber from the damper fork you must remove its bolt which we should tighten to 48 Nm (35 ft. lbs.) during final reassembly. Lower the wheel knuckle to access the shock absorber with its spring assembly. The suspension needs to be lifted by a suitable jack until the center of the hub stands 15.83 inches (402 mm) from the fender lip to proceed with bushing fastener torque adjustments. The reverse installation procedure should complete the replacement of the new assembly.

OEM Lincoln MKZ Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Shock Absorbers found

View related parts
Lincoln MKZ Shock Absorber, Rear
Part Number: EG9Z-18125-L
$187.28 MSRP: $300.00
You Save: $112.72 (38%)
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Shock Absorber, Rear Left, Rear Right; Shock
- Position: Rear
- Replaces: ASH-24635, ASH-24514, EG9Z-18125-B, EG9Z-18125-C, ASH-24588, DG9Z-18125-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Lincoln MKZ | Base, Black Label, Black Label Hybrid, Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKZ Shock Absorber, Passenger Side
Part Number: HG9Z-18125-B
$202.03 MSRP: $323.64
You Save: $121.61 (38%)
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Shock
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Lincoln MKZ | Base, Black Label, Black Label Hybrid, Hybrid, Premiere, Premiere Hybrid, Reserve, Reserve Hybrid, Reserve I, Reserve I Hybrid, Reserve II, Reserve II Hybrid, Select, Select Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Lincoln MKZ Strut, Front Driver Side
Part Number: EG9Z-18124-K
$196.01 MSRP: $325.45
You Save: $129.44 (40%)
ADD TO CART
Product Specifications
- Other Name: Strut - Suspension; Suspension Strut, Front Left
- Position: Front Driver Side
- Replaces: AST-12280, AST-12369, AST-24732, EG9Z-18124-D, EG9Z-18124-B, DG9Z-18124-B, DG9Z-18124-V, AST-18187
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Lincoln MKZ | Base, Black Label, Black Label Hybrid, Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKZ Strut, Front Passenger Side
Part Number: EG9Z-18124-J
$202.58 MSRP: $336.36
You Save: $133.78 (40%)
ADD TO CART
Product Specifications
- Other Name: Strut - Suspension; Suspension Strut, Front Right
- Position: Front Passenger Side
- Replaces: AST-12279, DG9Z-18124-U, DG9Z-18124-A, AST-24731, AST-18186, AST-12368, EG9Z-18124-C, EG9Z-18124-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Lincoln MKZ | Base, Black Label, Black Label Hybrid, Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKZ Shock Absorber, Rear Driver Side
Part Number: HG9Z-18125-D
$202.03 MSRP: $323.64
You Save: $121.61 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Shock Absorber, Rear Left; Shock
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Lincoln MKZ | Base, Black Label, Black Label Hybrid, Hybrid, Premiere, Premiere Hybrid, Reserve, Reserve Hybrid, Reserve I, Reserve I Hybrid, Reserve II, Reserve II Hybrid, Select, Select Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Lincoln MKZ Strut, Passenger Side
Part Number: HG9Z-18124-E
$227.91 MSRP: $387.27
You Save: $159.36 (42%)
ADD TO CART
Product Specifications
- Other Name: Strut - Suspension
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Lincoln MKZ | Base, Black Label, Black Label Hybrid, Hybrid, Premiere, Premiere Hybrid, Reserve, Reserve Hybrid, Reserve I, Reserve I Hybrid, Reserve II, Reserve II Hybrid, Select, Select Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Lincoln MKZ Strut, Front Driver Side
Part Number: AH6Z-18124-D
$95.30 MSRP: $160.00
You Save: $64.70 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly - Front; Front Left Strut; Shock Absorber Kit; Set; Shock Absorber
- Position: Front Driver Side
- Replaces: AST-421, AE5Z-18124-D, AE5Z-18124-B, AE5Z-18124-K, AST-471, AST-425, AE5Z-18124-F, AE5Z-18124-H, AST-423, AH6Z-18124-B, AST-427, AST-439
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2012 Lincoln MKZ | Base, Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Lincoln MKZ Strut, Front Passenger Side
Part Number: AH6Z-18124-C
$97.24 MSRP: $160.00
You Save: $62.76 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Front Right Suspension Strut Kit; Shock Absorber Set; Shock Absorber
- Position: Front Passenger Side
- Replaces: AH6Z-18124-A, AST-420, AE5Z-18124-A, AE5Z-18124-C, AST-426, AE5Z-18124-E, AE5Z-18124-G, AST-422, AST-470, AST-438, AE5Z-18124-J, AST-424
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2012 Lincoln MKZ | Base, Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Lincoln MKZ Strut, Front Passenger Side
Part Number: 7E5Z-18124-RH
$72.60 MSRP: $119.45
You Save: $46.85 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Shock Absorber; Front Right Suspension Strut Assembly; Complete Strut Kit.; Shock Absorber; Shock
- Position: Front Passenger Side
- Replaces: 6H6Z-18124-AR, 6E5Z-18124-BR, AST-163, 7H6Z-18124-RL, AST-337, AST-164, 8H6Z-18124-A, 8E5Z-18124-R, AST-162, AST-279, AST-388, 6E5Z-18124-AR
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007 Lincoln MKZ | Base | 6 Cyl 3.5 L GAS
View related parts
Lincoln MKZ Strut, Front Driver Side
Part Number: 7E5Z-18124-LH
$69.20 MSRP: $116.18
You Save: $46.98 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Shock Absorber; Front Left Suspension Strut Assembly; Complete Strut Set.; Shock Absorber; Shock
- Position: Front Driver Side
- Replaces: 6H6Z-18124-AL, 6E5Z-18124-AL, 8E5Z-18124-L, AST-159, AST-160, AST-336, 8H6Z-18124-B, 6E5Z-18124-BL, AST-389, AST-161, AST-280, 7H6Z-18124-LH
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007 Lincoln MKZ | Base | 6 Cyl 3.5 L GAS
View related parts
Lincoln MKZ Shock Absorber, Rear
Part Number: 6E5Z-18125-BA
$58.34 MSRP: $96.00
You Save: $37.66 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Rear Suspension Shock Absorber Kit; Complete Strut Assembly.; Shock; Suspension Shock Absorber
- Position: Rear
- Replaces: 7E5Z-18125-A, AE5Z-18125-C, ASH-431, ASH-440, 6E5Z-18125-AA, AST-281, AST-338, 8E5Z-18125-A, AST-177, ASH-421, AE5Z-18125-D, AE5Z-18125-B, ASH-432, AE5Z-18125-G, AST-283, AE5Z-18125-E, ASH-424, AE5Z-18125-A, 7H6Z-18125-C, AST-179, AE5Z-18125-F, AH6Z-18125-A, 6H6Z-18125-AA, ASH-420, 7H6Z-18125-D, ASH-423, ASH-422, AST-282, ASH-425, AH6Z-18125-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2012 Lincoln MKZ | Base, Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Lincoln MKZ Shock Absorber, Rear
Part Number: EG9Z-18125-D
$176.55 MSRP: $300.00
You Save: $123.45 (42%)
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Shock Absorber, Rear Left, Rear Right; Shock
- Manufacturer Note: (RH)
- Position: Rear
- Replaces: ASH-24587, DG9Z-18125-A, ASH-24513, EG9Z-18125-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Lincoln MKZ | Base, Black Label, Black Label Hybrid, Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKZ Shock Absorber, Rear Driver Side
Part Number: HG9Z-18125-E
$205.44 MSRP: $329.09
You Save: $123.65 (38%)
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Shock Absorber, Rear Left; Shock
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Lincoln MKZ | Black Label, Reserve, Reserve II, Select | 6 Cyl 3.0 L GAS
View related parts
Lincoln MKZ Shock Absorber, Rear Passenger Side
Part Number: HG9Z-18125-C
$205.44 MSRP: $329.09
You Save: $123.65 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Shock Absorber, Rear Right; Shock
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Lincoln MKZ | Black Label, Reserve, Reserve II, Select | 6 Cyl 3.0 L GAS
View related parts
Lincoln MKZ Strut, Front Driver Side
Part Number: HG9Z-18124-D
$262.19 MSRP: $420.00
You Save: $157.81 (38%)
ADD TO CART
Product Specifications
- Other Name: Strut - Suspension; Suspension Strut, Front Left
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Lincoln MKZ | Black Label, Reserve, Reserve II, Select | 6 Cyl 3.0 L GAS
View related parts
Lincoln MKZ Strut, Front Passenger Side
Part Number: HG9Z-18124-B
$258.78 MSRP: $414.55
You Save: $155.77 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut - Suspension; Suspension Strut, Front Right
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Lincoln MKZ | Black Label, Reserve, Reserve II, Select | 6 Cyl 3.0 L GAS
View related parts
Lincoln MKZ Strut, Front Driver Side
Part Number: HG9Z-18124-C
$235.43 MSRP: $390.91
You Save: $155.48 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut - Suspension; Suspension Strut, Front Left
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Lincoln MKZ | Base, Black Label, Black Label Hybrid, Hybrid, Premiere, Premiere Hybrid, Reserve, Reserve Hybrid, Reserve I, Reserve I Hybrid, Reserve II, Reserve II Hybrid, Select, Select Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS

Lincoln MKZ Shock Absorber

Welcome to our website where you can discover high-quality, genuine Lincoln MKZ Shock Absorber. We offer an extensive inventory of OEM Lincoln MKZ Shock Absorber at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Lincoln MKZ Shock Absorber Parts Questions & Experts Answers

Strut, Front Driver Side
7E5Z-18124-LH
Q: How to remove and replace the front shock absorber and spring assembly on Lincoln MKZ?
A: You must start the front shock absorber and spring assembly replacement by removing the three upper mount nuts on the discarding step and using an exact replacement part with the same part number because suspension fasteners determine both vehicle performance and safety. Twenty metric units of torque (22 foot-pounds) should be applied for tightening the new nuts. Install the vehicle onto a hoist in NEUTRAL position before you remove the brake line bracket bolt and place the brake line securely out of the way. Reinstall this line and secure it with 23 Nm (17 ft. lbs. Of torque). During wheel speed sensor bolt and harness bolt removal keep the sensor on a safe side and reinstall them by tightening both bolts to 23 Nm (17 ft. lbs.). A proper jack supports the wheel knuckle at its lower ball joints before you uninstall the stabilizer bar link upper nut. The new nut requires a torque of 40 Nm (30 ft. lbs.) when you reinstall it. The procedure then necessitates shock absorber lower bolt and flag nut removal along with damper removal before discarding the bolts and flag nuts and installing the new bolt to 103 Nm (76 ft. lbs.) torque while the suspension remains at bushing fastener tightening position. While disassembling the shock absorber from the damper fork you must remove its bolt which we should tighten to 48 Nm (35 ft. lbs.) during final reassembly. Lower the wheel knuckle to access the shock absorber with its spring assembly. The suspension needs to be lifted by a suitable jack until the center of the hub stands 15.83 inches (402 mm) from the fender lip to proceed with bushing fastener torque adjustments. The reverse installation procedure should complete the replacement of the new assembly.