Other Name: Front End Assembly; Radiator Support Panel, Front
Position: Front
Fits the following Lincoln Models:
MKZ | 2017-2020 | Base, Black Label, Black Label Hybrid, Hybrid, Premiere, Premiere Hybrid, Reserve, Reserve Hybrid, Reserve I, Reserve I Hybrid, Reserve II, Reserve II Hybrid, Select, Select Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
Other Name: Support - Radiator; Radiator Support Tie Bar, Front Upper
Position: Front Upper
Fits the following Lincoln Models:
Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Continental | 2017-2020 | 80th Anniversary Coach Door Edition, Base, Black Label, Coach Door Edition, Livery, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
Other Name: Bracket; Radiator Air Seal, Upper; Upper Seal
Position: Upper
Fits the following Lincoln Models:
Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Q: How to service and repair the body/frame mount bushing for the radiator support on Lincoln Blackwood?
A: Removing the top nut and backing plate of the engine compartment will be the first step to repair the radiator support bushing. Next remove the air cleaner assembly and support at the bottom. Support the removal of vehicle upper support using a floor jack. Install with threadlock, and sealer, without lubricants.
Q: How to service and repair the body support for the radiator support on Lincoln Navigator?
A: In order to fix the radiator support, undo the lower body mount bolt, and the mount itself and tighten the new mount 80 Nm (59 lb-ft). Loose other bolts, lift body and take off the upper mount. None of the lubricants are to be used and all fasteners are to be changed. Installation Invert procedure to remove.