How to service and repair the outer tie rod end on Lincoln Town Car?

The service and repair of the outer tie rod end starts by lifting and supporting the vehicle. The service procedure applies equally to both sides where the left side will serve as the representative example. The service starts with taking off the castle nut and then the cotter pin followed by removing the nut. The front wheel spindle separates from the tie rod end through usage of a Tie Rod End Remover. The next step requires marking the threads on the tie rod end before loosening the nut and bolt to detach the outer tie rod from the front wheel spindle tie rod adjusting sleeve. The desired installation depth of new tie rod ends in front wheel spindle tie rod adjusting sleeves can be determined by counting threads from the shaft end to the initial removal scribe mark. You should install the front wheel spindle tie rod adjusting sleeve clamp only after checking the alignment of the front wheels. The new tie rod end must be inserted into the front wheel spindle tie rod adjusting sleeve before its placement into the front wheel spindle while using a new nut and a new cotter pin for final installation. Conclude by lowering the vehicle to check the alignment system.

OEM Lincoln Town Car Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Tie Rod Ends found

View related parts
Lincoln Town Car Outer Tie Rod
Part Number: 2W7Z-3A130-A
$33.79 MSRP: $46.74
You Save: $12.95 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: End - Spindle Rod Connecting
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1984-2002 Lincoln Town Car | Anniversary, Base, Cartier, Cartier L, Cypress, Executive, Executive L, Jack Nicklaus, Signature, Signature SE, Touring Edition, Tournament Edition | 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
Lincoln Town Car Outer Tie Rod, Driver Side
Part Number: 6W1Z-3A130-B
$61.66 MSRP: $101.45
You Save: $39.79 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: End - Spindle Rod Connecting; Steering Tie Rod End, Left Outer; Outer Tie Rod End; Tie Rod End
- Manufacturer Note: LH Outer
- Position: Outer Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Lincoln Town Car | Designer Series, Executive, Executive L, Protection Series, Signature, Signature L, Signature Limited | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Lincoln Town Car Outer Tie Rod, Passenger Side
Part Number: 6W1Z-3A130-A
$64.86 MSRP: $106.73
You Save: $41.87 (40%)
ADD TO CART
Product Specifications
- Other Name: End - Spindle Rod Connecting; Steering Tie Rod End, Right Outer; Outer Tie Rod End; Tie Rod End
- Manufacturer Note: RH Outer
- Position: Outer Passenger Side
- Replaces: 3W1Z-3A130-BA, MEOE-72
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Lincoln Town Car | Designer Series, Executive, Executive L, Protection Series, Signature, Signature L, Signature Limited | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Lincoln Town Car Outer Tie Rod, Passenger Side
Part Number: 3W1Z-3A130-BA
$64.86 MSRP: $106.73
You Save: $41.87 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: End - Spindle Rod Connecting; Steering Tie Rod End, Right Outer; Outer Tie Rod End; Tie Rod End
- Manufacturer Note: RH Outer
- Position: Outer Passenger Side
- Replaced by: 6W1Z-3A130-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Lincoln Town Car | Cartier, Cartier L, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L GAS
View related parts
Lincoln Town Car Inner Tie Rod
Part Number: 2W7Z-3A131-A
$38.55 MSRP: $52.46
You Save: $13.91 (27%)
ADD TO CART
Product Specifications
- Other Name: End - Spindle Rod Connecting; Tie Rod End
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1984-2002 Lincoln Town Car | Anniversary, Base, Cartier, Cartier L, Cypress, Executive, Executive L, Jack Nicklaus, Signature, Signature SE, Touring Edition, Tournament Edition | 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
Lincoln Town Car Outer Tie Rod, Driver Side
Part Number: 3W1Z-3A130-BB
Product Specifications
- Other Name: End - Spindle Rod Connecting; Steering Tie Rod End, Left Outer; Outer Tie Rod End; Tie Rod End
- Manufacturer Note: LH Outer
- Position: Outer Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Lincoln Town Car | Cartier, Cartier L, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L GAS

Lincoln Town Car Tie Rod End

Welcome to our website where you can discover high-quality, genuine Lincoln Town Car Tie Rod End. We offer an extensive inventory of OEM Lincoln Town Car Tie Rod End at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Lincoln Town Car Tie Rod End Parts Questions & Experts Answers

Outer Tie Rod
2W7Z-3A130-A
Q: How to service and repair the outer tie rod end on Lincoln Town Car?
A: The service and repair of the outer tie rod end starts by lifting and supporting the vehicle. The service procedure applies equally to both sides where the left side will serve as the representative example. The service starts with taking off the castle nut and then the cotter pin followed by removing the nut. The front wheel spindle separates from the tie rod end through usage of a Tie Rod End Remover. The next step requires marking the threads on the tie rod end before loosening the nut and bolt to detach the outer tie rod from the front wheel spindle tie rod adjusting sleeve. The desired installation depth of new tie rod ends in front wheel spindle tie rod adjusting sleeves can be determined by counting threads from the shaft end to the initial removal scribe mark. You should install the front wheel spindle tie rod adjusting sleeve clamp only after checking the alignment of the front wheels. The new tie rod end must be inserted into the front wheel spindle tie rod adjusting sleeve before its placement into the front wheel spindle while using a new nut and a new cotter pin for final installation. Conclude by lowering the vehicle to check the alignment system.