Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Other Name: Seal - Roof Panel Opening; Weatherstrip
Manufacturer Note: Rear Glass
Fits the following Lincoln Models:
MKZ | 2013-2020 | Base, Black Label, Black Label Hybrid, Hybrid, Premiere, Premiere Hybrid, Reserve, Reserve Hybrid, Reserve I, Reserve I Hybrid, Reserve II, Reserve II Hybrid, Select, Select Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
MKZ | 2013-2020 | Base, Black Label, Black Label Hybrid, Hybrid, Premiere, Premiere Hybrid, Reserve, Reserve Hybrid, Reserve I, Reserve I Hybrid, Reserve II, Reserve II Hybrid, Select, Select Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
Other Name: Weatherstrip - Door Belt; Weatherstrip; Door Seal
Position: Driver Side
Fits the following Lincoln Models:
Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Other Name: Weatherstrip - Door Belt; Weatherstrip
Position: Driver Side
Fits the following Lincoln Models:
Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Other Name: Weatherstrip - Door Belt; Door Window Belt Weatherstrip, Rear Right; Weatherstrip
Position: Rear Passenger Side
Fits the following Lincoln Models:
Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Q: How to Service and Repair the Front Door Window Glass Weather Strip on Lincoln Navigator?
A: The front door window glass weather strip requires removal of the window glass, inside weather strip, glass channel bolt and top run to service. During reinstallation, revert the steps of the removal and tighten the bolts to 11 Nm (8 lb undertight)- tighten the bolts of the weather strip and related parts to fit and to install.
Q: How to Service and Repair the Front Door Window Glass Weather Strip on Lincoln Town Car?
A: As a repair measure to replace the front door window glass weather strip, first take out the window glass. Then remove the two bolts of the top run. Bolts when reinstalling should be tightened to 13 Nm (10 lb-ft). Lastly, undo the steps to remove, then finish the installation.