How to service the rear ABS sensor on Lincoln Zephyr?

In order to service the rear ABS sensor, detach the battery ground cable, dismount the rear seat bolster and disconnect the ABS sensor connector. Place the vehicle on a lift, unplug the grommet and unscrew the ABS sensor wire connector and sensor. Install new sensor at 23 Nm (17 ft. lbs. ) and repeat.

How to Service the Front ABS Sensor on Lincoln Zephyr?

In order to service the front ABS sensor, dismount the battery ground cable and place the vehicle onto a hoist. Disconnect the electrical connector of the ABS sensor, and the bolts, then disassemble the sensor. Re-fitting: Add bolts to 23 Nm (17 ft. lbs. ) and reverse the procedure of removing.

OEM Lincoln Zephyr ABS Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 ABS Sensors found

View related parts
Lincoln Zephyr ABS Sensor, Rear Driver Side Part Number: AE5Z-2C182-C
$27.48 MSRP: $40.00
You Save: $12.52 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Speed; ABS Wheel Speed Sensor, Rear Left; Rear Speed Sensor
- Manufacturer Note: Rear
- Position: Rear Driver Side
- Replaces: 6E5Z-2C187-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006 Lincoln Zephyr | Base | 6 Cyl 3.0 L GAS
View related parts
Lincoln Zephyr ABS Sensor, Rear Passenger Side Part Number: AE5Z-2C182-A
$27.73 MSRP: $39.33
You Save: $11.60 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Speed; ABS Wheel Speed Sensor, Rear Right; Rear Speed Sensor
- Manufacturer Note: Rear
- Position: Rear Passenger Side
- Replaces: 6E5Z-2C182-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006 Lincoln Zephyr | Base | 6 Cyl 3.0 L GAS
View related parts
Lincoln Zephyr ABS Sensor, Front Driver Side Part Number: AE5Z-2C205-C
$49.47 MSRP: $82.89
You Save: $33.42 (41%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left; Front Speed Sensor
- Position: Front Driver Side
- Replaces: BRAB-317, AE5Z-2C205-B, 6E5Z-2C205-AA, BRAB-161
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006 Lincoln Zephyr | Base | 6 Cyl 3.0 L GAS
View related parts
Lincoln Zephyr ABS Sensor, Front Passenger Side Part Number: AE5Z-2C204-C
$72.76 MSRP: $115.55
You Save: $42.79 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Right; Front Speed Sensor
- Position: Front Passenger Side
- Replaces: 6E5Z-2C204-AA, BRAB-316, AE5Z-2C204-B, BRAB-160
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006 Lincoln Zephyr | Base | 6 Cyl 3.0 L GAS

Lincoln Zephyr ABS Sensor

Welcome to our website where you can discover high-quality, genuine Lincoln Zephyr ABS Sensor. We offer an extensive inventory of OEM Lincoln Zephyr ABS Sensor at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Lincoln Zephyr ABS Sensor Parts and Q&A

ABS Sensor, Rear Passenger Side
AE5Z-2C182-A
Q: How to service the rear ABS sensor on Lincoln Zephyr?
A: In order to service the rear ABS sensor, detach the battery ground cable, dismount the rear seat bolster and disconnect the ABS sensor connector. Place the vehicle on a lift, unplug the grommet and unscrew the ABS sensor wire connector and sensor. Install new sensor at 23 Nm (17 ft. lbs. ) and repeat.
ABS Sensor, Front Driver Side
AE5Z-2C205-C
Q: How to Service the Front ABS Sensor on Lincoln Zephyr?
A: In order to service the front ABS sensor, dismount the battery ground cable and place the vehicle onto a hoist. Disconnect the electrical connector of the ABS sensor, and the bolts, then disassemble the sensor. Re-fitting: Add bolts to 23 Nm (17 ft. lbs. ) and reverse the procedure of removing.