How to Service the Crankshaft Position Sensor on Lincoln Zephyr?

Service of the crankshaft position (CKP) sensor begins with putting the vehicle in neutral position and hoisting it up. Start by disconnecting the battery ground cable together with any needed removal of underbody cover fasteners. You need to disconnect both the electrical connector of the CKP sensor and then remove the bolt to extract the sensor from its position. The O-ring seal of the new CKP sensor requires clean engine oil as lubrication before you tighten the bolt to 10 Nm (89 lb-in). Perform the installation by proceeding in reverse order of the removal steps.

OEM Lincoln Zephyr Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
Lincoln Zephyr Crankshaft Position Sensor
Part Number: 5L8Z-6C315-AA
$25.22 MSRP: $40.05
You Save: $14.83 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Sensor - Crankshaft Position - Cps
- Manufacturer Note: Also Used As Camshaft Position Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006 Lincoln Zephyr | Base | 6 Cyl 3.0 L GAS

Lincoln Zephyr Crankshaft Position Sensor

Welcome to our website where you can discover high-quality, genuine Lincoln Zephyr Crankshaft Position Sensor. We offer an extensive inventory of OEM Lincoln Zephyr Crankshaft Position Sensor at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Lincoln Zephyr Crankshaft Position Sensor Parts Questions & Experts Answers

Crankshaft Position Sensor
5L8Z-6C315-AA
Q: How to Service the Crankshaft Position Sensor on Lincoln Zephyr?
A: Service of the crankshaft position (CKP) sensor begins with putting the vehicle in neutral position and hoisting it up. Start by disconnecting the battery ground cable together with any needed removal of underbody cover fasteners. You need to disconnect both the electrical connector of the CKP sensor and then remove the bolt to extract the sensor from its position. The O-ring seal of the new CKP sensor requires clean engine oil as lubrication before you tighten the bolt to 10 Nm (89 lb-in). Perform the installation by proceeding in reverse order of the removal steps.