How to service the brake backing plate on Mercury Mariner?

Service of the brake backing plate starts by removing the rear wheel cylinder and jounce hose bracket bolt with subsequent tightening of the bolt to 17 Nm (13 ft. lbs.) during reinstallation. You must hold the parking brake cable conduit locking tabs compressed during the pulling of the parking brake cable assembly through the backing plate. First remove the rear wheel hub after which remove the four backing plate bolts and backing plate securing device while securing the bolts at 66 Nm (49 ft. lbs.) during reinstallation. Reinstall the hub by reversing the prior removal steps as the final part of this installation.

How to service and repair the brake backing plate on Mercury Sable?

The repair process of brake backing plate requires first removal of the brake drum. First disconnect the parking brake cable before taking out the wheel cylinder. Remove the parking brake cable and conduit from the brake backing plate through its path before leading them out of the backing plate area. Cut off the bolt which fastens the ABS sensor and dispose of it. Discard both the backing plate bolt set after you remove them from their respective positions. You should follow the opposite order of removal steps during installation using newly purchased bolts.

OEM Mercury Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

64 Backing Plates found

View related parts
Mercury Backing Plate, Rear Passenger Side Part Number: 1L2Z-2C028-AB
$6.92 MSRP: $10.71
You Save: $3.79 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Brake Disc Splash; Brake Backing Plate, Rear Right; Brake Dust Shield; Splash Shield
- Manufacturer Note: Kit Shield rear brake - includes shiels and 4 screws
- Position: Passenger Side
- Replaces: 1L2Z-2C028-AA
Fits the following Mercury Models:
- Mountaineer | 2001-2005 | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Splash Shield, Rear Driver Side Part Number: AE5Z-2C029-A
$16.57 MSRP: $25.64
You Save: $9.07 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Brake Disc Splash; Brake Dust Shield, Rear Left; Brake Dust Shield
- Position: Driver Side
- Replaces: 3M8Z-2C029-A
Fits the following Mercury Models:
- Milan | 2006-2011 | Base, High Version - Car, Hybrid, Low Version - Car, Mid Version - Car, Premier, Sport | 2.3L L4, 2.5L L4, 3.0L V6, 3.5L V6, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Splash Shield, Rear Passenger Side Part Number: AE5Z-2C028-A
$17.16 MSRP: $26.55
You Save: $9.39 (36%)
ADD TO CART
Product Specifications
- Other Name: Shield - Brake Disc Splash; Brake Dust Shield, Rear Right; Brake Dust Shield
- Position: Passenger Side
- Replaces: 3M8Z-2C028-A
Fits the following Mercury Models:
- Milan | 2006-2011 | Base, High Version - Car, Hybrid, Low Version - Car, Mid Version - Car, Premier, Sport | 2.3L L4, 2.5L L4, 3.0L V6, 3.5L V6, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Splash Shield, Front Passenger Side Part Number: F87Z-2K004-DA
$17.97 MSRP: $27.80
You Save: $9.83 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Right; Brake Dust Shield
- Position: Passenger Side
Fits the following Mercury Models:
- Mountaineer | 1998-2001 | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Backing Plate, Rear Driver Side Part Number: 6L2Z-2C029-AA
$21.27 MSRP: $32.91
You Save: $11.64 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Brake Disc Splash; Brake Backing Plate, Rear Left; Brake Dust Shield; Splash Shield
- Position: Driver Side
Fits the following Mercury Models:
- Mountaineer | 2006-2010 | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Backing Plate, Rear Passenger Side Part Number: 6L2Z-2C028-AA
$21.27 MSRP: $32.91
You Save: $11.64 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Brake Disc Splash; Brake Backing Plate, Rear Right; Brake Dust Shield; Splash Shield
- Position: Passenger Side
Fits the following Mercury Models:
- Mountaineer | 2006-2010 | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Backing Plate, Rear Driver Side Part Number: 1L2Z-2C029-AB
$27.27 MSRP: $42.20
You Save: $14.93 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Brake Disc Splash; Brake Backing Plate, Rear Left; Brake Dust Shield; Splash Shield
- Manufacturer Note: Kit Shield rear brake - includes shiels and 4 screws
- Position: Driver Side
- Replaces: 1L2Z-2C029-AA
Fits the following Mercury Models:
- Mountaineer | 2001-2005 | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Splash Shield, Front Part Number: YL8Z-2K004-AA
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front; Dust Shield; Brake Dust Shield
- Manufacturer Note: RH/LH
- Position: Front
Fits the following Mercury Models:
- Mariner | 2005-2011 | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Splash Shield, Driver Side Part Number: F5AZ-2K005-A
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield
- Position: Driver Side
Fits the following Mercury Models:
- Grand Marquis | 1995-2002 | GS, LS | 8 Cyl 4.6 L GAS
View related parts
Mercury Splash Shield, Front Passenger Side Part Number: 6E5Z-2K004-AA
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Right; Brake Dust Shield
- Position: Passenger Side
Fits the following Mercury Models:
- Milan | 2006-2011 | Base, Hybrid, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Backing Plate, Front Driver Side Part Number: 4F1Z-2K005-AA
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Left; Splash Shield; Brake Dust Shield
- Manufacturer Note: L.H., Triangle cutout
- Position: Driver Side
- Replaces: F5OY-2K005-A
Fits the following Mercury Models:
- Sable | 1996-2005 | G, GS, LS, LS Premium, Platinum Edition | 3.0L V6, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Backing Plate, Front Passenger Side Part Number: 4F1Z-2K004-AA
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Right; Splash Shield; Brake Dust Shield
- Manufacturer Note: R.H., Triangle cutout
- Position: Passenger Side
- Replaces: F5OY-2K004-A
Fits the following Mercury Models:
- Sable | 1996-2005 | G, GS, LS, LS Premium, Platinum Edition | 3.0L V6, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Backing Plate, Rear Part Number: F4ZZ-2C028-A
$11.10 MSRP: $17.18
You Save: $6.08 (36%)
Product Specifications
- Other Name: Shield - Brake Disc Splash; Brake Dust Shield, Rear; Splash Shield; Brake Dust Shield
- Position: Rear
- Replaces: E8OY-2C028-A
Fits the following Mercury Models:
- Sable | 1989-1992 | GS, LS | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Splash Shield, Front Driver Side Part Number: F57Z-2K005-AA
$56.22 MSRP: $89.27
You Save: $33.05 (38%)
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Left; Brake Dust Shield
- Manufacturer Note: LH, 4x4
- Position: Driver Side
Fits the following Mercury Models:
- Mountaineer | 1997-2001 | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Backing Plate, Rear Driver Side Part Number: F65Z-2212-AA
Product Specifications
- Other Name: Plate Assembly - Brake Back; Brake Backing Plate, Rear Left, Rear Right; Brake Dust Shield
- Manufacturer Note: Plate asy. - rear wheel brake - LH
- Position: Driver Side
Fits the following Mercury Models:
- Mountaineer | 2001 | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Backing Plate, Rear Passenger Side Part Number: F65Z-2211-AA
Product Specifications
- Other Name: Plate Assembly - Brake Back; Brake Backing Plate, Rear Left, Rear Right; Brake Dust Shield
- Manufacturer Note: Plate asy. - rear wheel brake - RH
- Position: Passenger Side
Fits the following Mercury Models:
- Mountaineer | 2001 | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Backing Plate, Rear Part Number: F5OY-2C028-A
Product Specifications
- Other Name: Shield - Brake Disc Splash; Brake Dust Shield, Rear; Splash Shield; Brake Dust Shield
- Position: Rear
Fits the following Mercury Models:
- Sable | 1996-2005 | G, GS, LS, LS Premium | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Splash Shield, Passenger Side Part Number: F5AZ-2K004-A
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield
- Position: Passenger Side
Fits the following Mercury Models:
- Grand Marquis | 1995-2002 | GS, LS | 8 Cyl 4.6 L GAS
View related parts
Mercury Backing Plate, Driver Side Part Number: E5AZ2212A
Product Specifications
- Other Name: Plate Assembly - Brake Back; Brake Dust Shield
- Position: Driver Side
Fits the following Mercury Models:
- Colony Park | 1987-1991 | GS, LS | 8 Cyl 5.0 L GAS
- Grand Marquis | 1984-1991 | Base, Colony Park, GS, LS | 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
- Marquis | 1985-1986 | Base, Brougham | 4 Cyl 2.3 L GAS, 6 Cyl 3.8 L GAS
View More
View related parts
Mercury Backing Plate, Rear Driver Side Part Number: CL8Z-2B540-B
Product Specifications
- Other Name: Bracket; Disc Brake Caliper Bracket, Rear Left; Brake Dust Shield; Caliper Mount
- Position: Driver Side
- Replaces: 6L8Z-2C220-B, 6L8Z-2B540-B, 6L8Z-2B540-D
Fits the following Mercury Models:
- Mariner | 2005-2007 | Base, Convenience, DX, Ford Hybrid, Hybrid, Limited, Luxury, LX, Mercury Convenience, Mercury Hybrid, Mercury Luxury, Mercury Premier, Premier, XL, XLS, XLT | 2.3L L4, 3.0L V6, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

| Page 1 of 4 |Next >

1-20 of 64 Results

Mercury Backing Plate

If you own Mercury and want to keep it in top shape, choosing OEM Backing Plate is a smart move. They are precisely engineered and follow strict factory standards. They are made in advanced facilities that use cutting edge technology. Each part goes through thorough testing to confirm strength and safety, so you can trust it. FordPartsDeal.com gives you genuine Mercury Backing Plate at some of the affordable online prices without cutting quality. Every OEM Mercury part includes the manufacturer's warranty, easy returns, and super-fast delivery. So why wait? Shop now and get your vehicle back to peak condition.

The Mercury Backing Plate is a metal shield covering brake components, protecting them from debris. From the year 1938, Mercury made its space between the economy and luxury, more on the sharper side with a softer ride that soaked rough pavement. The name was derived from the Roman messenger who had the winged sandals, and it suited the Mercury cars well as they were lively yet controlled. The showrooms being what they are, cabin quiet was pushed over raw speed, and buyers got thicker glass, softer bushings, and wider seats that hushed road roar and eased long trips. Cougar and Grand Marquis shared the suspension tune, keeping corners flat and imparting a comfortable ride. This proved the company knows feel and value balance. Despite shifts in preferences, Mercury kept adding fresh comfort tweaks and practical tech to its roster; this steady march continued until production ended in 2011. As for the rear at the wheels, a thin sheet metal Backing Plate sits behind each rotor to catch water, salt, and gravel from marring delicate caliper hardware. On drum assemblies, a heavier Backing Plate carries the shoes and left brake linkages. Therefore, if it warps or its pads groove, the brake action may drag or chatter. Due to the proximity to puddles, the metal in the piece can rust very quickly, leaving the components bare and exposed to fading. Changing a worn Backing Plate usually only requires the removal of the rotor and hub. In addition, installing a new unit restores the shield that helps every Mercury stop cleanly and surely.

Mercury Backing Plate Parts and Q&A

Splash Shield, Front
YL8Z-2K004-AA
Q: How to service the brake backing plate on Mercury Mariner?
A:
Service of the brake backing plate starts by removing the rear wheel cylinder and jounce hose bracket bolt with subsequent tightening of the bolt to 17 Nm (13 ft. lbs.) during reinstallation. You must hold the parking brake cable conduit locking tabs compressed during the pulling of the parking brake cable assembly through the backing plate. First remove the rear wheel hub after which remove the four backing plate bolts and backing plate securing device while securing the bolts at 66 Nm (49 ft. lbs.) during reinstallation. Reinstall the hub by reversing the prior removal steps as the final part of this installation.
Backing Plate, Front Passenger Side
4F1Z-2K004-AA
Q: How to service and repair the brake backing plate on Mercury Sable?
A:
The repair process of brake backing plate requires first removal of the brake drum. First disconnect the parking brake cable before taking out the wheel cylinder. Remove the parking brake cable and conduit from the brake backing plate through its path before leading them out of the backing plate area. Cut off the bolt which fastens the ABS sensor and dispose of it. Discard both the backing plate bolt set after you remove them from their respective positions. You should follow the opposite order of removal steps during installation using newly purchased bolts.