Other Name: Switch Assembly - Front Door - Center; Door Lock Switch, Front; Switch Assembly - Front Door - Central; Door Lock Switch
Position: Front Center
Fits the following Mercury Models:
Mariner | 2008-2011 | Base, Hybrid, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
Other Name: Switch Assembly; Liftgate, Back Glass, Trunk Lid, and Tailgate Release Switches; Door Lock Switch.; Lock Switch; Door Ajar Switch; Release Switch; Lift Gate Switch; Trunk Switch; Limiter
Position: Rear
Replaces: 1L2Z-14018-AA
Fits the following Mercury Models:
Mariner | 2008-2011 | Base, Hybrid, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
Q: How to service the rear door jamb switch on Mercury Grand Marquis?
A: The rear door trim panel should be removed to service the rear door ajar switch. Next, unconnect the two electrical connectors at the switch. Then take off the screw of door ajar switch. Last but not least, re-installation should be performed by undoing the process performed during the removal.
Q: How to Service the Rear Door Jamb Switch on Mercury Mountaineer?
A: To service the rear door ajar switch, start by removing the rear door latch. Then, release the locking tab, rotate the switch counterclockwise, and take it out. To install the new switch, simply reverse the steps taken during removal.