How to service and repair the A/C Hose from the compressor to the condenser on Mercury Mariner?

Service and repairs on the compressor to condenser discharge line need to start with suspending the vehicle using a hoist in neutral gear. Remove all refrigerant then detach the front bumper cover together with the right-hand splash shield. First disconnect any associated power connection for block heater systems when the procedure allows. The first step requires you to separate the compressor outlet fitting bolt and unconnect the fitting while discarding the O-ring seal and applying 8 Nm torque (71 lb-in) during new fitting installation. After dismantling the condenser inlet fitting nut disconnect it while removing the fitting plus discarding the O-rings and installing the new fitting with torque set at 8 Nm (71 lb-in). The installation of a new compressor-to-condenser discharge line requires the same uninstallation steps in reverse order. Users should replace all O-ring seals while adding the correct amount of clean PAG oil to the refrigerant system. Complete the refrigeration system procedure by performing evacuation then performing both leak testing and refrigerant system charging steps. A new suction accumulator requires replacement only when contamination from a malfunctioned A/C compressor or damaged suction accumulator can be physically observed.

OEM Mercury Mariner A/C Hose

Air Conditioning Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

30 A/C Hoses found

View related parts
Mercury Mariner A/C Line Part Number: 6M6Z-19D850-AB
$177.62 MSRP: $245.72
You Save: $68.10 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose; Rear A/C Hose
- Manufacturer Note: Manifold And Tube Assy
- Replaces: 5M6Z-19D850-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mercury Mariner | Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Mariner Suction Hose Part Number: AM6Z-19867-A
$92.01 MSRP: $127.29
You Save: $35.28 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose; Inlet Tube; Hose & Tube Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Mariner | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Mariner A/C Line Part Number: 8L8Z-19867-D
$58.86 MSRP: $81.43
You Save: $22.57 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose; Suction Hose
- Replaces: 8L8Z-19867-B, YF-3367
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Mercury Mariner | Base, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner A/C Line Part Number: 6L8Z-19835-BA
$47.86 MSRP: $78.18
You Save: $30.32 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose; Evaporator Tube
- Replaces: YL8Z-19835-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Mariner | Base, Convenience, Luxury, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Discharge Hose Part Number: AM6Z-19972-A
$27.73 MSRP: $38.36
You Save: $10.63 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Discharge Hose; A/C Refrigerant Liquid Hose; A/C Hose; Connector Hose; A/C Tube
- Manufacturer Note: Compressor to condenser
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Mariner | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Mariner Inlet Tube Part Number: AM6Z-19835-A
$48.50 MSRP: $67.10
You Save: $18.60 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose; Evaporator Tube; Liquid Hose
- Manufacturer Note: Dryer To Evaporator
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Mariner | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Mariner Manifold Tube, Front Part Number: 9M6Z-19D850-B
$116.68 MSRP: $158.78
You Save: $42.10 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Manifold Hose Assembly, Front; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly
- Manufacturer Note: Manifold And Tube Assy
- Position: Front
- Replaces: YF-3462, 9M6Z-19D850-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Mercury Mariner | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Mariner Discharge Line Part Number: 5L8Z-19D850-CB
$172.01 MSRP: $237.96
You Save: $65.95 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose
- Manufacturer Note: Manifold And Tube Assy
- Replaces: 5L8Z-19D850-CA, YF-2978
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2006 Mercury Mariner | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner A/C Line Part Number: 6L8Z-19D850-AB
$165.68 MSRP: $272.62
You Save: $106.94 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose; Discharge Line; A/C Tube
- Replaces: 6L8Z-19D850-AA, 5L8Z-19D850-EA, YF-3136
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Mariner | Base, Convenience, Luxury, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner A/C Line Part Number: 6L8Z-19972-AA
$61.46 MSRP: $85.02
You Save: $23.56 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose; Discharge Line
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Mariner | Base, Convenience | 4 Cyl 2.3 L GAS
View related parts
Mercury Mariner A/C Line Part Number: 6L8Z-19867-AA
$85.56 MSRP: $118.36
You Save: $32.80 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose; Suction Hose
- Replaces: 5L8Z-19867-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007 Mercury Mariner | Convenience | 4 Cyl 2.3 L GAS
View related parts
Mercury Mariner A/C Hose Part Number: AM6Z-19835-B
$73.75 MSRP: $102.02
You Save: $28.27 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; Liquid Hose; Hose & Tube Assembly
- Manufacturer Note: Dehydrator To Condenser
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Mariner | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Mariner Front A/C Hose Part Number: 6M6Z-19837-AA
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mercury Mariner | Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Mariner A/C Line, Front Part Number: 8L8Z-19867-E
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Suction Hose; A/C Refrigerant Hose, Front; A/C Refrigerant Liquid Hose; A/C Hose; Suction Hose; Connector Hose
- Manufacturer Note: Air Conditioning Evaporator To Compressor
- Position: Front
- Replaces: 8L8Z-19867-C, 8L8Z-19867-A, YF-3548
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Mercury Mariner | Base | 4 Cyl 2.3 L GAS
View related parts
Mercury Mariner Manifold Tube, Front Part Number: 8M6Z-19D850-A
Product Specifications
- Other Name: Tube Assembly; A/C Manifold Hose Assembly, Front; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly
- Manufacturer Note: Manifold And Tube Assy
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Mercury Mariner | Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Mariner Suction Hose Part Number: 5L8Z-19867-AA
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2006 Mercury Mariner | Base, Convenience | 4 Cyl 2.3 L GAS
View related parts
Mercury Mariner Front Pipe Part Number: 8M6Z-19A834-B
Product Specifications
- Other Name: Tube Assembly; A/C Pipe, Front
- Position: Front
- Replaces: YF-3362, 8M6Z-19A834-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Mariner | Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Mariner Inlet Tube Part Number: 9M6Z-19835-A
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose
- Manufacturer Note: Evaporator Inlet
- Replaces: 8M6Z-19835-A, YF-3364
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Mariner | Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Mariner A/C Line Part Number: 6L8Z-19835-AA
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose; Evaporator Tube
- Replaces: 5L8Z-19835-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Mariner | Base, Convenience, Luxury, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner A/C Hose Part Number: 9M6Z-19835-D
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; Liquid Hose
- Manufacturer Note: Dehydrator To Condenser
- Replaces: 9M6Z-19835-C, 8M6Z-19835-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Mariner | Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)

| Page 1 of 2 |Next >

1-20 of 30 Results

Mercury Mariner A/C Hose

OEM A/C Hose boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get A/C Hose with long life and a perfect fit. Come to our website and find genuine Mercury Mariner parts. We keep a wide inventory of OEM Mariner parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Mercury Mariner A/C Hose is an important part of the air conditioning system of Mercury Mariner cars noted for their standard and quality. This A/C Hose also plays the role of carrying the refrigerant required to cool cabin and regulate the temperature inside the cabin. The Mercury Mariner A/C Hose is built to handle high pressures and to last and for this purpose it comes with aluminum fittings on both ends that are crimped. One of the reasons for its importance is that it can be used with different Mariner models to increase the efficiency and safety of the vehicle's internal air conditioning system. The Mercury Mariner, which is a compact crossover SUV launched in 2005, some of its attributes have being named Consumers Digest premier Buy for three successive years; these include the A/C Hose. The A/C Hose is an important component of Mariner since it is used in the transfer of refrigerants which are essential in the cooling system of the vehicle. In particular, the Mercury Mariner A/C Hose has been a product that has deputies in the automotive market because it has a hard-core construction and reliable quality. Because of the features that enable it to boost efficiency and safety, the Mercury Mariner A/C Hose is one of the crucial components of the car - it provides a comfortable trip with lesser outside temperatures for the drivers and passengers.

Mercury Mariner A/C Hose Parts and Q&A

A/C Line
6L8Z-19D850-AB
Q: How to service and repair the A/C Hose from the compressor to the condenser on Mercury Mariner?
A:
Service and repairs on the compressor to condenser discharge line need to start with suspending the vehicle using a hoist in neutral gear. Remove all refrigerant then detach the front Bumper cover together with the right-hand splash shield. First disconnect any associated power connection for block heater systems when the procedure allows. The first step requires you to separate the compressor outlet fitting bolt and unconnect the fitting while discarding the O-ring seal and applying 8 Nm torque (71 lb-in) during new fitting installation. After dismantling the condenser inlet fitting nut disconnect it while removing the fitting plus discarding the O-rings and installing the new fitting with torque set at 8 Nm (71 lb-in). The installation of a new compressor-to-condenser discharge line requires the same uninstallation steps in reverse order. Users should replace all O-ring seals while adding the correct amount of clean PAG oil to the refrigerant system. Complete the refrigeration system procedure by performing evacuation then performing both leak testing and refrigerant system charging steps. A new suction accumulator requires replacement only when contamination from a malfunctioned A/C compressor or damaged suction accumulator can be physically observed.