How to Service and Repair the Sway Bar Bushing on Mercury Mariner?

In order to replace the sway bar bushing, make sure that the vehicle is in neutral position on a hoist. Detach and dispose the bushing bracket bolts, and install new ones with tightening up to 70 Nm (52 lb-ft). Check and change damaged bushings, being careful of the alignment when fitting back. Apply good components and follow the torque values.

How Should the Sway Bar Bushing Be Installed on Mercury Mariner?

The flanges should be elevated and the split points should be in the rear when it comes to installing sway bar bushings. Install the vehicle in neutral on a hoist, take out the 2 bolts and bracket and tighten to 70 Nm (52 ft. lbs.) when replacing. Check the wear and replace where necessary and then proceed to reverse the process of taking off.

OEM Mercury Mariner Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Sway Bar Bushings found

View related parts
Mercury Mariner Bushing, Front Part Number: 8L8Z-5484-A
$13.78 MSRP: $18.75
You Save: $4.97 (27%)
ADD TO CART
Product Specifications
- Other Name: Bush; Front Suspension Stabilizer Bar Bushing Kit.; Bushings
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Mercury Mariner | Base, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Stabilizer Bar Bushing, Front Part Number: 9L8Z-5484-A
$18.87 MSRP: $26.77
You Save: $7.90 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush; Front Suspension Stabilizer Bar Bushing Kit.; Bushing; Bushings
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Mercury Mariner | Base, Hybrid, Premier | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Stabilizer Bar Bushing, Front Part Number: 8L8Z-5484-B
$19.14 MSRP: $27.87
You Save: $8.73 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush; Front Suspension Stabilizer Bar Bushing Kit.; Bushing; Bushings
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Mercury Mariner | Base, Hybrid, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Stabilizer Bar Bushing, Rear Part Number: 9L8Z-5493-A
$22.23 MSRP: $31.53
You Save: $9.30 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Rear Suspension Stabilizer Bar Bushing Kit; Sway Bar Bushing.; Bushings
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Mercury Mariner | Base, Hybrid, Premier | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Stabilizer Bar Insulator, Front Part Number: 5L8Z-5484-CA
$19.24 MSRP: $28.00
You Save: $8.76 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush; Front Suspension Stabilizer Bar Bushing Kit.; Bushings
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Mariner | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

Mercury Mariner Sway Bar Bushing

Welcome to our website where you can discover high-quality, genuine Mercury Mariner Sway Bar Bushing. We offer an extensive inventory of OEM Mercury Mariner Sway Bar Bushing at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Mercury Mariner Sway Bar Bushing Parts and Q&A

Stabilizer Bar Bushing, Front
9L8Z-5484-A
Q: How to Service and Repair the Sway Bar Bushing on Mercury Mariner?
A: In order to replace the sway bar bushing, make sure that the vehicle is in neutral position on a hoist. Detach and dispose the bushing bracket bolts, and install new ones with tightening up to 70 Nm (52 lb-ft). Check and change damaged bushings, being careful of the alignment when fitting back. Apply good components and follow the torque values.
Stabilizer Bar Insulator, Front
5L8Z-5484-CA
Q: How Should the Sway Bar Bushing Be Installed on Mercury Mariner?
A: The flanges should be elevated and the split points should be in the rear when it comes to installing sway bar bushings. Install the vehicle in neutral on a hoist, take out the 2 bolts and bracket and tighten to 70 Nm (52 ft. lbs.) when replacing. Check the wear and replace where necessary and then proceed to reverse the process of taking off.