How to service the rear ABS sensor on an All Wheel Drive (AWD) on Mercury Milan?

A service on the ABS sensor for AWD vehicles requires initial steps which include seat bolster removal followed by ABS sensor electrical connector disconnection. Set the vehicle to neutral mode and suspend it on a hoist. Use a suitable tool to disconnect the grommet from the body and afterward remove the harness nut and bolt associated with the ABS sensor while tightening them to 23 Nm (17 lb-ft) specification. The procedure for removing the sensor requires disconnection of the ABS sensor bolt along with removing the sensor piece while tightening bolt to 23 Nm (17 lb-ft) when reinstalling. The procedure ends with reinstalling everything in the opposite order of removal.

How to service the front ABS sensor on Mercury Milan?

Service of the front ABS sensor requires a vehicle that sits in neutral position on a hoist. Start the procedure by taking off the retainers and placing the fender splash shield to the side. First disconnect the electrical connector of the ABS sensor and then uninstall the two bolts which support the ABS sensor harness bracket. Tighten the bracket-to-wheel knuckle bolt to 23 Nm and bracket-to-body bolt to 7 Nm during installation. Start by untightening and removing the front ABS sensor bolt in the knuckle then pull out the ABS sensor before securing it with 23 Nm (17 lb-ft) torque upon assembly. The installation ends with performing the removal steps in reverse order.

OEM Mercury Milan ABS Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 ABS Sensors found

View related parts
Mercury Milan ABS Sensor, Rear Driver Side Part Number: AE5Z-2C182-C
$27.48 MSRP: $40.00
You Save: $12.52 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Speed; ABS Wheel Speed Sensor, Rear Left; Rear Speed Sensor
- Manufacturer Note: Rear
- Position: Rear Driver Side
- Replaces: 6E5Z-2C187-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Mercury Milan | Base, Hybrid, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan ABS Sensor, Front Driver Side Part Number: AE5Z-2C205-C
$60.54 MSRP: $101.64
You Save: $41.10 (41%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left; Front Speed Sensor
- Position: Front Driver Side
- Replaces: BRAB-317, AE5Z-2C205-B, 6E5Z-2C205-AA, BRAB-161
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Mercury Milan | Base, Hybrid, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan ABS Sensor, Front Passenger Side Part Number: AE5Z-2C204-C
$84.73 MSRP: $134.55
You Save: $49.82 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Right; Front Speed Sensor
- Position: Front Passenger Side
- Replaces: 6E5Z-2C204-AA, BRAB-316, AE5Z-2C204-B, BRAB-160
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Mercury Milan | Base, Hybrid, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan ABS Sensor, Rear Passenger Side Part Number: AE5Z-2C182-A
$27.73 MSRP: $39.33
You Save: $11.60 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Speed; ABS Wheel Speed Sensor, Rear Right; Rear Speed Sensor
- Manufacturer Note: Rear
- Position: Rear Passenger Side
- Replaces: 6E5Z-2C182-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Mercury Milan | Base, Hybrid, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

Mercury Milan ABS Sensor

OEM ABS Sensor boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get ABS Sensor with long life and a perfect fit. Come to our website and find genuine Mercury Milan parts. We keep a wide inventory of OEM Milan parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Mercury Milan ABS Sensor is an essential part of the Anti-lock Braking System that is characteristic of Mercury Milan cars and which is appreciated for its high-quality and efficiency. This sensor has the responsibility of feeling wheel rotation, avoiding locking of wheels during extreme brake and safe stopping especially during bad traction. In the Mercury Milan model, manufactured from 2006 to 2011, the most common types of ABS Sensors are the magnet-based and the toothed wheel ones; the latter sensors are tasked to create voltage signals that are necessary to supply the data to the control unit of the ABS system in real-time. Through this data the system can increase/decrease hydraulic pressure thus increasing efficiency and safety. The Mercury Milan ABS Sensor works for a range of Milan models so that car owners receive the optimal of braking in any road conditions. In particular, the prospect where the ABS Sensor retains the efficacy of the car's braking system at low speed makes this component highly important within the automobile industry. As is to be expected from a car of this class, the Mercury Milan has been designed in rather sleek and modern style and offers a relatively vast cabin area; moreover, it is equipped with rather sophisticated safety features such as the ABS Sensor. The Mercury Milan becomes even better with the incorporation of this sensor; therefore, it is a perfect choice for anyone in search of a reliable mid-size car. The Mercury Milan ABS Sensor captures all the aspects of the brand's Strengths, Opportunities, and Threats and places inside the automobile industry a sensor that is fully ready to perform with high quality and security.

Mercury Milan ABS Sensor Parts and Q&A

ABS Sensor, Rear Driver Side
AE5Z-2C182-C
Q: How to service the rear ABS sensor on an All Wheel Drive (AWD) on Mercury Milan?
A:
A service on the ABS sensor for AWD vehicles requires initial steps which include seat bolster removal followed by ABS sensor electrical connector disconnection. Set the vehicle to neutral mode and suspend it on a hoist. Use a suitable tool to disconnect the grommet from the body and afterward remove the harness nut and bolt associated with the ABS sensor while tightening them to 23 Nm (17 lb-ft) specification. The procedure for removing the sensor requires disconnection of the ABS sensor bolt along with removing the sensor piece while tightening bolt to 23 Nm (17 lb-ft) when reinstalling. The procedure ends with reinstalling everything in the opposite order of removal.
ABS Sensor, Front Passenger Side
AE5Z-2C204-C
Q: How to service the front ABS sensor on Mercury Milan?
A:
Service of the front ABS sensor requires a vehicle that sits in neutral position on a hoist. Start the procedure by taking off the retainers and placing the fender splash shield to the side. First disconnect the electrical connector of the ABS sensor and then uninstall the two bolts which support the ABS sensor harness bracket. Tighten the bracket-to-wheel knuckle bolt to 23 Nm and bracket-to-body bolt to 7 Nm during installation. Start by untightening and removing the front ABS sensor bolt in the knuckle then pull out the ABS sensor before securing it with 23 Nm (17 lb-ft) torque upon assembly. The installation ends with performing the removal steps in reverse order.