How to service the rear seat cushion on Mercury Milan?

Service of the rear seat cushion begins by checking that the two rear latches are disengaged before moving on to prevent any damage; avoid forcing the latches beyond their recommended limits of release. When the latches become free you can lift marginally upward from the front edge of the rear seat cushion to separate it from the floor before pushing it ever so slightly toward the rear to release the rear retainers. The installation of the rear seat cushion requires positioning the frame wire across the rear retainers while performing the backward steps of removal. Test that safety belts and buckles remain reachable for those riding in a vehicle after completing installation of the seat.

How to remove and install the rear seat cushion on Mercury Milan?

The first step to remove the rear seat cushion is to completely disengage both rear bumper latches then lift the front edge of the cushion slowly to separate it from the floor. Selectively pushing the rear seat cushion forward allows the detachment of its rear section from rear retainers before the cushion can be taken out. When installing the rear seat cushion position the frame wire behind the retainers while keeping the safety belts untwisted and easily available for occupants to access them. The process ends with reinstalling the carpet and other installed parts by following the opposite order of removal.

OEM Mercury Milan Seat Cushion

Seat Pad Cushion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

19 Seat Cushions found

View related parts
Mercury Milan Seat Cushion Pad, Rear Part Number: AN7Z-54600A88-C
$85.28 MSRP: $117.97
You Save: $32.69 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Milan Seat Cushion Pad, Rear Part Number: AN7Z-54600A88-B
$39.73 MSRP: $54.96
You Save: $15.23 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Base, Premier | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
View related parts
Mercury Milan Seat Cushion Pad, Rear Part Number: AN7Z-54600A88-A
$35.52 MSRP: $49.14
You Save: $13.62 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Base, Premier | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
View related parts
Mercury Milan Seat Cushion Pad, Rear Part Number: 6H6Z-54600A88-A
$24.98 MSRP: $34.56
You Save: $9.58 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Seat Back Pad, Front Driver Side Part Number: BN7Z-5464811-A
$99.32 MSRP: $137.39
You Save: $38.07 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Back
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011 Mercury Milan | Base, Hybrid, Premier | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
View related parts
Mercury Milan Seat Back Pad, Driver Side Part Number: 9N7Z-5464811-A
$30.92 MSRP: $42.78
You Save: $11.86 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Back
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2010 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Seat Cushion Pad, Passenger Side Part Number: 9N7Z-54632A22-A
$20.75 MSRP: $28.71
You Save: $7.96 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad; Seat Cushion
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Mercury Milan | Base, Hybrid, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Seat Back Pad, Driver Side Part Number: AN7Z-5464811-A
Product Specifications
- Other Name: Pad - Seat Back
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010 Mercury Milan | Base, Hybrid, Premier | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
View related parts
Mercury Milan Seat Back Pad, Passenger Side Part Number: 9N7Z-5464810-A
Product Specifications
- Other Name: Pad
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2010 Mercury Milan | Base, Hybrid, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Seat Cushion Pad, Driver Side Part Number: 9N7Z-54632A23-A
Product Specifications
- Other Name: Pad - Seat Cushion; Seat Cushion
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Mercury Milan | Base, Hybrid, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Seat Back Pad, Driver Side Part Number: 7N7Z-5464811-B
Product Specifications
- Other Name: Pad - Seat Back
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2008 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Seat Back Pad, Front Part Number: 7N7Z-5464811-A
Product Specifications
- Other Name: Pad - Seat Back
- Manufacturer Note: RH/LH
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Seat Back Pad, Passenger Side Part Number: 7N7Z-5464810-C
Product Specifications
- Other Name: Pad
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2008 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Seat Back Pad, Passenger Side Part Number: 7N7Z-5464810-A
Product Specifications
- Other Name: Pad
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2008 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Seat Cushion Pad, Front Driver Side Part Number: 6N7Z-54632A23-A
Product Specifications
- Other Name: Pad - Seat Cushion; Seat Cushion
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2008 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Seat Cushion Pad, Front Bottom Passenger Side Part Number: 6N7Z-54632A22-A
Product Specifications
- Other Name: Pad; Seat Cushion
- Position: Front Bottom Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2008 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Seat Cushion Pad, Rear Part Number: 7H6Z-54600A88-A
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2009 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Seat Back Pad, Front Passenger Side Part Number: BN7Z-5464810-B
Product Specifications
- Other Name: Pad
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011 Mercury Milan | Base, Premier | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
View related parts
Mercury Milan Seat Back Pad, Passenger Side Part Number: BN7Z-5464810-A
Product Specifications
- Other Name: Pad
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011 Mercury Milan | Base, Hybrid, Premier | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX

Mercury Milan Seat Cushion

OEM Seat Cushion boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Seat Cushion with long life and a perfect fit. Come to our website and find genuine Mercury Milan parts. We keep a wide inventory of OEM Milan parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Mercury Milan Seat Cushion is an important part that greatly contributes to the overall effect in driving across a range of models of Mercury Milan, which garner a good reputation for stability and output. As a solution to most complaints that relayed to some of the inadequacies associated with the car like lack of buttocks support and general discomfort during long drives the Mercury Milan Seat Cushion gives support to eradicated pressure points that cause fatigue and back aches during long drives. These are available in options such as beaded as well as sheepskin and these help to enhance blood circulation as well as temperature control hence the comfort during both the hot and cold periods. These include the beaded Seat Cushion particularly in issuing back and thighs massagers and the sheepskin type most wanted for moisture absorption. Such compatibility with more than one Mercury Milan model, manufactured from 2006-2011, proves the versatility of the Seat Cushion and, therefore, its necessity in the car to increase its productivity as well as protect its passenger. Launched at the 2005 Chicago Auto Show, the Mercury Milan is a mid-size sedan known for its steady handling and a commodious interior; the improvement boosts value thanks to the inclusion of a high-quality Seat Cushion. The Mercury Milan Seat Cushion therefore possesses favourable features in the accommodation of different comfort necessities making all car trips worthwhile, safe and efficient. Last but not the least, Mercury Milan Seat Cushion which symbolises the brand's concern for the driver's comfort and contentment.

Mercury Milan Seat Cushion Parts and Q&A

Seat Back Pad, Passenger Side
7N7Z-5464810-C
Q: How to service the rear seat cushion on Mercury Milan?
A:
Service of the rear seat cushion begins by checking that the two rear latches are disengaged before moving on to prevent any damage; avoid forcing the latches beyond their recommended limits of release. When the latches become free you can lift marginally upward from the front edge of the rear seat cushion to separate it from the floor before pushing it ever so slightly toward the rear to release the rear retainers. The installation of the rear seat cushion requires positioning the frame wire across the rear retainers while performing the backward steps of removal. Test that safety belts and buckles remain reachable for those riding in a vehicle after completing installation of the seat.
Seat Back Pad, Passenger Side
9N7Z-5464810-A
Q: How to remove and install the rear seat cushion on Mercury Milan?
A:
The first step to remove the rear seat cushion is to completely disengage both rear bumper latches then lift the front edge of the cushion slowly to separate it from the floor. Selectively pushing the rear seat cushion forward allows the detachment of its rear section from rear retainers before the cushion can be taken out. When installing the rear seat cushion position the frame wire behind the retainers while keeping the safety belts untwisted and easily available for occupants to access them. The process ends with reinstalling the carpet and other installed parts by following the opposite order of removal.