How to service the Evaporative Emission Canister Purge Valve on Mercury Monterey?

To service the Evaporative Emission Canister Purge Valve, disassemble cowl panel grille, disconnect battery ground, and electrical connector and EVAP tube couplings. Take off the mounting nuts and a valve. Install by tightening of 12 Nm, leak test and verification drive cycle. Be careful around fuel elements.

How to service and repair the Evaporative Emission Canister Purge Valve on Mercury Monterey?

In order to fix the Evaporative Emission Canister Purge Valve, you are to remove the cowl panel grille, unhook the battery, and unscrew the electrical connector and tubes. Un screw the mounting nuts to remove the valve. Installation Re-install the system in reverse, then tighten to 12 Nm, and test and verify the system by a leak test and a verification drive cycle.

OEM Mercury Monterey Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Canister Purge Valves found

View related parts
Mercury Monterey Vent Control Solenoid Part Number: 6F9Z-9F945-AA
$81.05 MSRP: $117.98
You Save: $36.93 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Solenoid Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Filter Solenoid; Solenoid; Vent
- Replaces: 5U5Z-9F945-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mercury Monterey | Luxury | 6 Cyl 4.2 L GAS
View related parts
Mercury Monterey Purge Valve Part Number: F78Z-9C915-A
$72.24 MSRP: $118.87
You Save: $46.63 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Canister Purge Valve; Purge Control Valve
- Replaces: F78Z-9C915-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Mercury Monterey | Base, Convenience, Luxury, Premier | 6 Cyl 4.2 L GAS
View related parts
Mercury Monterey Purge Control Valve Part Number: 4F1Z-9C915-AC
$86.68 MSRP: $142.62
You Save: $55.94 (40%)
ADD TO CART
Product Specifications
- Other Name: Valve Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Vapor Canister Solenoid
- Replaces: 4F1Z-9C915-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mercury Monterey | Luxury | 6 Cyl 4.2 L GAS
View related parts
Mercury Monterey Vent Control Solenoid Part Number: 3F2Z-9F945-AA
Product Specifications
- Other Name: Solenoid Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Mercury Monterey | Base, Convenience, Luxury, Premier | 6 Cyl 4.2 L GAS

Mercury Monterey Canister Purge Valve

Welcome to our website where you can discover high-quality, genuine Mercury Monterey Canister Purge Valve. We offer an extensive inventory of OEM Mercury Monterey Canister Purge Valve at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Mercury Monterey Canister Purge Valve Parts and Q&A

Vent Control Solenoid
6F9Z-9F945-AA
Q: How to service the Evaporative Emission Canister Purge Valve on Mercury Monterey?
A: To service the Evaporative Emission Canister Purge Valve, disassemble cowl panel grille, disconnect battery ground, and electrical connector and EVAP tube couplings. Take off the mounting nuts and a valve. Install by tightening of 12 Nm, leak test and verification drive cycle. Be careful around fuel elements.
Purge Valve
F78Z-9C915-A
Q: How to service and repair the Evaporative Emission Canister Purge Valve on Mercury Monterey?
A: In order to fix the Evaporative Emission Canister Purge Valve, you are to remove the cowl panel grille, unhook the battery, and unscrew the electrical connector and tubes. Un screw the mounting nuts to remove the valve. Installation Re-install the system in reverse, then tighten to 12 Nm, and test and verify the system by a leak test and a verification drive cycle.