How to Service the Rear Brake Line Flexible Hose on Mercury Mountaineer?

Initiate the servicing work on the rear brake flexible hose after you remove the wheel and tire. Start by removing the brake caliper flow bolt followed by discarding both copper washers but keep the new bolt torque at 35 Nm (26 lb-ft) when reinstalling it. When replacing the brake tube fitting to the brake flexible hose users should tighten it to 18 Nm (13 lb-ft). The removal process of the brake flexible hose bracket bolt releases the brake hose for detachment but the installation requires a 20 Nm (15 lb-ft) torque setting on the bracket bolt. Perform the reverse steps after removing the brake caliper and follow the correct bleeding procedure. The brake system requires new fluid which should come from an unopened source since using drained fluid can lead to both system contamination and potential damages. Brake fluid poses risks to painted and plastic surfaces thus any fluid leakages require immediate water washing. The USA or Canadian callers should reach emergency medical information for Ford/Motorcraft products at 1-800-959-3673 while consulting the MSDS document available for the product.

OEM Mercury Mountaineer Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Brake Lines found

View related parts
Mercury Mountaineer Flex Hose, Front Passenger Side
Part Number: 8L5Z-2078-R
$30.43 MSRP: $49.09
You Save: $18.66 (39%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Front Flex Hose; Hydraulic Hose
- Position: Front Passenger Side
- Replaces: 7L5Z-2078-R
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2001 Mercury Mountaineer | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Mountaineer Flex Hose, Front Driver Side
Part Number: 8L5Z-2078-L
$30.23 MSRP: $48.00
You Save: $17.77 (38%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Front Flex Hose; Hydraulic Hose
- Position: Front Driver Side
- Replaces: 7L5Z-2078-L
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2001 Mercury Mountaineer | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Mountaineer Flex Hose, Front Passenger Side
Part Number: 6L2Z-2078-D
$31.59 MSRP: $42.99
You Save: $11.40 (27%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2010 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer Flex Hose, Driver Side
Part Number: 1L2Z-2282-AB
$48.06 MSRP: $65.40
You Save: $17.34 (27%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2005 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer Brake Hose, Front Passenger Side
Part Number: 4L2Z-2078-AA
$82.50 MSRP: $112.27
You Save: $29.77 (27%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Right; Brake Line; Front Flex Hose; Brake Hydraulic Hose; Hydraulic Hose
- Position: Front Passenger Side
- Replaces: 1L2Z-2078-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2005 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer Flex Hose, Front Driver Side
Part Number: 6L2Z-2078-C
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2010 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer Brake Hose, Front Driver Side
Part Number: 4L2Z-2078-AB
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left; Brake Line; Front Flex Hose; Brake Hydraulic Hose; Hydraulic Hose
- Position: Front Driver Side
- Replaces: 1L2Z-2078-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2005 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer Flex Hose, Rear Driver Side
Part Number: 2C5Z-2282-AA
Product Specifications
- Other Name: Hose Assembly - Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2005 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer Flex Hose, Passenger Side
Part Number: 1L2Z-2282-AA
Product Specifications
- Other Name: Hose Assembly - Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2005 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer Flex Hose, Rear Driver Side
Part Number: 6L2Z-2282-B
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Driver Side
- Replaces: 6L2Z-2282-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2010 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer Flex Hose, Rear Passenger Side
Part Number: 6L2Z-2282-A
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Passenger Side
- Replaces: 6L2Z-2282-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2010 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer Flex Hose, Rear Driver Side
Part Number: F67Z-2282-BA
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2001 Mercury Mountaineer | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS

Mercury Mountaineer Brake Line

Welcome to our website where you can discover high-quality, genuine Mercury Mountaineer Brake Line. We offer an extensive inventory of OEM Mercury Mountaineer Brake Line at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Mercury Mountaineer Brake Line Parts Questions & Experts Answers

Flex Hose, Rear Passenger Side
6L2Z-2282-A
Q: How to Service the Rear Brake Line Flexible Hose on Mercury Mountaineer?
A: Initiate the servicing work on the rear brake flexible hose after you remove the wheel and tire. Start by removing the brake caliper flow bolt followed by discarding both copper washers but keep the new bolt torque at 35 Nm (26 lb-ft) when reinstalling it. When replacing the brake tube fitting to the brake flexible hose users should tighten it to 18 Nm (13 lb-ft). The removal process of the brake flexible hose bracket bolt releases the brake hose for detachment but the installation requires a 20 Nm (15 lb-ft) torque setting on the bracket bolt. Perform the reverse steps after removing the brake caliper and follow the correct bleeding procedure. The brake system requires new fluid which should come from an unopened source since using drained fluid can lead to both system contamination and potential damages. Brake fluid poses risks to painted and plastic surfaces thus any fluid leakages require immediate water washing. The USA or Canadian callers should reach emergency medical information for Ford/Motorcraft products at 1-800-959-3673 while consulting the MSDS document available for the product.