How to service and repair the rear brake pads on Mercury Mountaineer?

Begin the rear brake pad service by checking brake fluid in the master cylinder reservoir until it reaches half the maximum capacity if necessary. With the vehicle in NEUTRAL, position it on a hoist. The brake caliper pistons should be retracted through the caliper sight hole carefully to prevent damage to their boots and pistons. Also avoid letting the brake caliper depend from the flexible hose because this requires proper tool support. Screw your work to remove the two brake caliper bolts before placing the caliper to the side. Discard both spring clips and replace the brake pad when it has exceeded its specifications. A single brake disc pad kit includes the required linings for both sides thus you must install new brake pads and spring clips. There exists a suitable device for forcing the brake caliper pistons into position through the caliper bore followed by brake caliper installation and bolt tightening to 32 Nm (24 ft. lbs.). Testing brakes should be performed after filling the brake master cylinder reservoir with clean fluid.

OEM Mercury Mountaineer Brake Pads

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Pads found

View related parts
Mercury Mountaineer Brake Pads, Front
Part Number: 2U2Z-2V001-YA
$45.07 MSRP: $66.65
You Save: $21.58 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Lining; Disc Brake Pad Set, Front; Front Pads; Pad
- Manufacturer Note: Ford Retail Spec
- Position: Front
- Replaces: 1L2Z-2001-BA, 2L2Z-2001-BA, 1L2Z-2001-AA, BRF-833-B, 7L2Z-2001-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2005 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer Brake Pads
Part Number: XL2Z-2001-AA
$6.33 MSRP: $8.75
You Save: $2.42 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Shoe; Disc Brake Pad Set; Front Pads
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2000 Mercury Mountaineer | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Mountaineer Brake Pads, Front
Part Number: BU2Z-2V001-C
$46.59 MSRP: $66.65
You Save: $20.06 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Lining; Disc Brake Pad Set, Front; Front Pads
- Position: Front
- Replaces: BL5Z-2001-A, BRF-1479, BU2Z-2V001-B, 1L5Z-2001-BB, 3L2Z-2001-AA, 4L5Z-2001-AA, 4L2Z-2001-BA, 3L5Z-2001-AA, 6L5Z-2001-A, BRF-1399, BRF-1394, BR-833-B, 6L5Z-2001-B, BRF-833
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001 Mercury Mountaineer | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Mountaineer Brake Pads, Rear
Part Number: 8L2Z-2V200-B
$45.79 MSRP: $66.65
You Save: $20.86 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Brake; Disc Brake Pad Set, Rear; Rear Pads
- Position: Rear
- Replaces: 7L2Z-2200-A, 8L2Z-2V200-A, 8L2Z-2200-AB, 1L2Z-2200-AA, BRF-1109, 3L2Z-2200-BA, BRF-881, BR-1109-B, 6L2Z-2200-B, 8L2Z-2200-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2010 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer Brake Pads, Front
Part Number: 8L2Z-2V001-B
$45.79 MSRP: $66.65
You Save: $20.86 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Lining; Disc Brake Pad Set, Front; Front Pads
- Position: Front
- Replaces: BR-1158-B, 6L2Z-2001-A, 8L2Z-2V001-A, BRF-1158
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2010 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer Brake Pads, Front
Part Number: 1U2Z-2V001-TA
$44.51 MSRP: $66.65
You Save: $22.14 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad; Disc Brake Pad Set, Front; Front Pads
- Manufacturer Note: excludes electric
- Position: Front
- Replaces: BRF-652, XU2Z-2V001-ARA, 1L2Z-2001-CA, XL2Z-2B121-BA, 2L5Z-2001-AA, XL2Z-2B120-BA, XL2Z-2001-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2001 Mercury Mountaineer | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Mountaineer Brake Pads
Part Number: XU2Z-2V200-SA
$41.33 MSRP: $56.24
You Save: $14.91 (27%)
ADD TO CART
Product Specifications
- Other Name: Pad; Disc Brake Pad Set, Rear; Disc Brake Pad Kit; Rear Pads; Disc Brake Pad Set
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2001 Mercury Mountaineer | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS

Mercury Mountaineer Brake Pads

Welcome to our website where you can discover high-quality, genuine Mercury Mountaineer Brake Pads. We offer an extensive inventory of OEM Mercury Mountaineer Brake Pads at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Mercury Mountaineer Brake Pads Parts Questions & Experts Answers

Brake Pads, Rear
8L2Z-2V200-B
Q: How to service and repair the rear brake pads on Mercury Mountaineer?
A: Begin the rear brake pad service by checking brake fluid in the master cylinder reservoir until it reaches half the maximum capacity if necessary. With the vehicle in NEUTRAL, position it on a hoist. The Brake Caliper Pistons should be retracted through the caliper sight hole carefully to prevent damage to their boots and pistons. Also avoid letting the brake caliper depend from the flexible hose because this requires proper tool support. Screw your work to remove the two brake caliper bolts before placing the caliper to the side. Discard both spring clips and replace the brake pad when it has exceeded its specifications. A single brake disc pad kit includes the required linings for both sides thus you must install new brake pads and spring clips. There exists a suitable device for forcing the brake caliper pistons into position through the caliper bore followed by brake caliper installation and bolt tightening to 32 Nm (24 ft. lbs.). Testing brakes should be performed after filling the brake master cylinder reservoir with clean fluid.