How to service a three-way catalytic converter on Mercury Mystique?

Service procedures for the three-way catalytic converter start by uninstalling the heat shield component and at the same time removing the catalytic converter from its connection to the manifold. Start the service by raising and supporting the vehicle and by disconnecting the heated oxygen sensor electrical connector through disconnecting cables and unclipping wiring. First disconnect the flange connection and exhaust hanger insulator before removing the catalytic converter by unscrewing support bracket retaining bolts and removing the clamp bolt and finally taking out the converter and discarding its gasket with nuts. Prior to installation check exhaust hanger insulators for damage trends and change the ones that are damaged. Position the catalytic converter in place before installing the clamp bolt together with tightening the support bracket retaining bolts. Fasten the flange after installing proper specification exhaust hanger insulators and new gaskets and nuts using their loose connections. Lower the car while avoiding jointing compound application within the area in front of the catalytic converter before tightening the manifold to catalytic converter nuts. Apply the heat shield before you support the vehicle to connect the heated oxygen sensor electrical connector and fasten the wiring by clipping it into position before lowering the vehicle.

OEM Mercury Mystique Catalytic Converter

Cat. Converter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Catalytic Converters found

View related parts
Mercury Mystique Exhaust Manifold, Passenger Side
Part Number: F8RZ-5G232-BC
Product Specifications
- Other Name: Converter Assembly; Manifold
- Manufacturer Note: RH manifold and front converter asy. Male fitting at the EGR connector - (note: for warranty repairs - check for technical service publications (SSM, TSB) prior to ordering)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2000 Mercury Mystique | LS | 6 Cyl 2.5 L GAS
View related parts
Mercury Mystique Exhaust Manifold, Driver Side
Part Number: F8RZ-5G232-AC
Product Specifications
- Other Name: Catalyst Assembly; Manifold
- Manufacturer Note: LH manifold and front converter asy. - (note: for warranty repairs - check for technical service publictions (SSM, TSB) prior to ordering)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-1999 Mercury Mystique | LS | 6 Cyl 2.5 L GAS
View related parts
Mercury Mystique Catalytic Converter
Part Number: F8RZ-5E212-CC
Product Specifications
- Other Name: Converter Assembly; Converter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2000 Mercury Mystique | LS | 6 Cyl 2.5 L GAS
View related parts
Mercury Mystique Catalytic Converter
Part Number: F8RZ-5E212-BH
Product Specifications
- Other Name: Pipe Assembly; Exhaust Pipe; Front Pipe; Converter & Pipe
- Manufacturer Note: Converter asy
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2000 Mercury Mystique | GS | 4 Cyl 2.0 L GAS
View related parts
Mercury Mystique Catalytic Converter
Part Number: F8RZ-5E212-BC
Product Specifications
- Other Name: Converter Assembly; Converter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2000 Mercury Mystique | LS | 6 Cyl 2.5 L GAS
View related parts
Mercury Mystique Exhaust Manifold, Passenger Side
Part Number: F6RZ-5G232-BA
Product Specifications
- Other Name: Converter Assembly; Manifold
- Manufacturer Note: RH Manifold and catalyst asy. Male fitting at the EGR connector
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1997 Mercury Mystique | GS, LS | 6 Cyl 2.5 L GAS
View related parts
Mercury Mystique Exhaust Manifold, Driver Side
Part Number: F6RZ-5G232-AG
Product Specifications
- Other Name: Converter Assembly; Manifold
- Manufacturer Note: LH Manifold and catalyst asy.
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1997 Mercury Mystique | GS, LS | 6 Cyl 2.5 L GAS
View related parts
Mercury Mystique Front Pipe
Part Number: F6RZ-5E212-RA
Product Specifications
- Other Name: Pipe Assembly; Exhaust Pipe
- Manufacturer Note: Converter & Pipe assy, BEFORE 6/24/96
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1997 Mercury Mystique | GS, LS | 4 Cyl 2.0 L GAS
View related parts
Mercury Mystique Exhaust Manifold, Passenger Side
Part Number: F5RZ-5G232-CA
Product Specifications
- Other Name: Converter Assembly; Manifold
- Manufacturer Note: RH Manifold and catalyst asy. Female fitting at the EGR connector.
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-2000 Mercury Mystique | Base, GS, GS Spree, LS, LS Young America | 6 Cyl 2.5 L GAS
View related parts
Mercury Mystique Exhaust Manifold, Driver Side
Part Number: F5RZ-5G232-BA
Product Specifications
- Other Name: Converter Assembly; Manifold
- Manufacturer Note: LH Manifold and catalyst asy.
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-2000 Mercury Mystique | Base, GS, GS Spree, LS, LS Young America | 6 Cyl 2.5 L GAS
View related parts
Mercury Mystique Catalytic Converter
Part Number: F5RZ-5E212-D
Product Specifications
- Other Name: Catalyst Assembly; Converter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1997 Mercury Mystique | Base, GS, GS Spree, LS, LS Young America | 6 Cyl 2.5 L GAS
View related parts
Mercury Mystique Catalytic Converter
Part Number: F5RZ-5E212-C
Product Specifications
- Other Name: Catalyst Assembly; Converter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1997 Mercury Mystique | Base, GS, GS Spree, LS, LS Young America | 6 Cyl 2.5 L GAS

Mercury Mystique Catalytic Converter

Welcome to our website where you can discover high-quality, genuine Mercury Mystique Catalytic Converter. We offer an extensive inventory of OEM Mercury Mystique Catalytic Converter at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Mercury Mystique Catalytic Converter Parts Questions & Experts Answers

Catalytic Converter
F8RZ-5E212-BC
Q: How to service a three-way catalytic converter on Mercury Mystique?
A: Service procedures for the three-way catalytic converter start by uninstalling the heat shield component and at the same time removing the catalytic converter from its connection to the manifold. Start the service by raising and supporting the vehicle and by disconnecting the heated oxygen sensor electrical connector through disconnecting cables and unclipping wiring. First disconnect the flange connection and exhaust hanger insulator before removing the catalytic converter by unscrewing support bracket retaining bolts and removing the clamp bolt and finally taking out the converter and discarding its gasket with nuts. Prior to installation check exhaust hanger insulators for damage trends and change the ones that are damaged. Position the catalytic converter in place before installing the clamp bolt together with tightening the support bracket retaining bolts. Fasten the flange after installing proper specification exhaust hanger insulators and new gaskets and nuts using their loose connections. Lower the car while avoiding jointing compound application within the area in front of the catalytic converter before tightening the manifold to catalytic converter nuts. Apply the heat shield before you support the vehicle to connect the heated oxygen sensor electrical connector and fasten the wiring by clipping it into position before lowering the vehicle.