How to Service the Air Bag Sensor in the Front Door for Side Impact on Mercury Sable?

First service the front door side impact sensor when the vehicle SRS is entirely switched off. The first procedure is to remove the front door trim panel then disconnect the electrical connection of the side impact sensor. Correct operation of the restraint system depends on properly tightening the fasteners of the restraints control module (RCM) and impact sensor to their specified torque value thus preventing fatal injuries or deaths in a crash situation. The side impact sensor can be extracted after unbolting the two screws while checking the insert nut for damage and swapping out damaged parts for new ones. To finish the sensor installation reverse the removal steps but tighten the screws to 0.9 Nm (9 lb-in). The SRS must undergo power-up testing after which the vehicle can be released only if the system operates properly without malfunctions. A new part installation should be followed by diagnostic retry when the issue remains unresolved which will lead to reinstalling the original part.

OEM Mercury Sable Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Air Bag Sensors found

View related parts
Mercury Sable Impact Sensor, Front Part Number: 8C3Z-14B004-A
$46.13 MSRP: $72.00
You Save: $25.87 (36%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Air Bag Impact Sensor, Front, Rear; Air Bag Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Side Impact Sensor, Center Part Number: 8G1Z-14B345-B
$65.92 MSRP: $95.95
You Save: $30.03 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Side Air Bag; Air Bag Impact Sensor, Center, Front; Air Bag Sensor; Side Sensor
- Position: Center
- Replaces: 8G1Z-14B345-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Front Sensor Part Number: F5DZ14B006A
$34.14 MSRP: $47.23
You Save: $13.09 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Air Bag Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995 Mercury Sable | GS, LS, LTS | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Rear Sensor Part Number: F5DZ14B004A
$28.61 MSRP: $39.57
You Save: $10.96 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Restraint Systems; Air Bag Sensor; Front Sensor; Sensor Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995 Mercury Sable | GS, LS, LTS | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Rear Sensor, Front Part Number: F2DZ14B004A
$90.49 MSRP: $123.14
You Save: $32.65 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Front; Air Bag Sensor; Front Sensor; Sensor Assembly
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1995 Mercury Sable | GS, LS, LTS | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Side Impact Sensor Part Number: 2F1Z-14B345-AA
$47.98 MSRP: $66.38
You Save: $18.40 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Side Air Bag; Air Bag Impact Sensor; Air Bag Sensor; Side Sensor
- Manufacturer Note: RH and LH side, W/ side airbags
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002 Mercury Sable | GS, LS, LS Premium | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Side Impact Sensor Part Number: YF1Z-14B345-AA
Product Specifications
- Other Name: Sensor - Side Air Bag; Air Bag Impact Sensor; Air Bag Sensor; Side Sensor
- Manufacturer Note: RH and LH side, W/ side airbags
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2001 Mercury Sable | GS, LS, LS Premium | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Front Sensor, Driver Side Part Number: FODZ14B005A
Product Specifications
- Other Name: Sensor Assembly; Air Bag Sensor; Sensor
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1991 Mercury Sable | GS, LS | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Front Sensor, Passenger Side Part Number: FODZ14B004A
Product Specifications
- Other Name: Sensor & Bracket Assembly; Air Bag Sensor; Sensor; Sensor Assembly
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1991 Mercury Sable | GS, LS | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Front Sensor, Driver Side Part Number: F6DZ-14B005-AA
Product Specifications
- Other Name: Sensor Assembly; Air Bag Sensor; Sensor
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1997 Mercury Sable | G, GS, LS | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Front Sensor, Passenger Side Part Number: F6DZ-14B004-AA
Product Specifications
- Other Name: Sensor Assembly; Air Bag Sensor; Sensor
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1997 Mercury Sable | G, GS, LS | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Front Impact Sensor Part Number: 6R3Z-14B345-BB
Product Specifications
- Other Name: Sensor - Side Air Bag; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Sensor; Side Impact Sensor; Side Impact Bag; Side Sensor
- Position: Front
- Replaces: 6R3Z-14B345-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Mercury Sable | GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Front Sensor Part Number: 6F1Z-14B006-A
Product Specifications
- Other Name: Sensor Assembly; Air Bag Impact Sensor, Front; Air Bag Sensor
- Manufacturer Note: Center front sensor
- Position: Front
- Replaces: 2F1Z-14B006-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2004 Mercury Sable | GS, LS, LS Premium | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Rear Sensor Part Number: F2DZ14B007A
Product Specifications
- Other Name: Sensor Assembly; Air Bag Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1995 Mercury Sable | GS, LS, LTS | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Front Sensor Part Number: F2DZ14B006A
Product Specifications
- Other Name: Sensor Assembly; Air Bag Sensor; Center Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1995 Mercury Sable | GS, LS, LTS | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Front Sensor Part Number: YF1Z-14B006-AA
Product Specifications
- Other Name: Sensor Assembly; Air Bag Impact Sensor, Front; Air Bag Sensor
- Manufacturer Note: Center Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2001 Mercury Sable | GS, LS, LS Premium | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

Mercury Sable Air Bag Sensor

OEM Air Bag Sensor boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Air Bag Sensor with long life and a perfect fit. Come to our website and find genuine Mercury Sable parts. We keep a wide inventory of OEM Sable parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Mercury Sable Air Bag Sensor is one of the extraordinary pieces of automotive safety, which may be installed in different Sable models to guarantee steady performance. This is a very important air bag sensor commonly referred to as the crash sensor, which is used in the determination of impacts and triggering of the control unit to release the air bags should an accident occur to safeguard the occupants. The Mercury Sable, manufactured by the Mercury which is an old division of the Ford Motor company has gone through several generations and the current generations all have Air Bag Sensors to improve the efficiency of air bag systems. Sensors Use These have developed from basic models to ones that have high impact detection, and high response rate thus making safety of the passenger much more enhanced. Another is the Mercury Sable Air Bag Sensor which can be used in many Sable models thus making it ideal to improving on the safety of the vehicles. For instance, the Mercury Sable was the first American sedan to incorporate aerodynamic resin units, composite head- lamps that provided intimations of the auto's prowess. Fresh exploits have the Air Bag Sensor as an essential component of the automobile that swiftly initiates air bags as a life protector in the auto market. Mercury Sable Air Bag Sensor is still up to now an essential component that guarantees the durability, the functionality as well as the innovation of the Mercury Sable line.

Mercury Sable Air Bag Sensor Parts and Q&A

Side Impact Sensor, Center
8G1Z-14B345-B
Q: How to Service the Air Bag Sensor in the Front Door for Side Impact on Mercury Sable?
A:
First service the front door side impact sensor when the vehicle SRS is entirely switched off. The first procedure is to remove the front door trim panel then disconnect the electrical connection of the side impact sensor. Correct operation of the restraint system depends on properly tightening the fasteners of the restraints control module (RCM) and impact sensor to their specified torque value thus preventing fatal injuries or deaths in a crash situation. The side impact sensor can be extracted after unbolting the two screws while checking the insert nut for damage and swapping out damaged parts for new ones. To finish the sensor installation reverse the removal steps but tighten the screws to 0.9 Nm (9 lb-in). The SRS must undergo power-up testing after which the vehicle can be released only if the system operates properly without malfunctions. A new part installation should be followed by diagnostic retry when the issue remains unresolved which will lead to reinstalling the original part.