How to remove and install the front bumper cover on all on Mercury Sable?

The first step for front bumper cover removal on all vehicles requires headlamps removal and vehicle support through lifting. The first step includes unsettling five pin-type retainers located under the chin spoiler and next the air dam can be separated by removing seven screws and three bolts. Unscrew thirteen screws from the splash shields on LH and RH front fenders then dismiss their two pin-type retainers before proceeding to remove the front splash shields. The front bumper cover bolts need to come out while also taking out pin-type retainers and the radiator grille specifically on the Taurus model. The Bumper cover on Sable models needs to be unclipped from the support of the radiator grille opening while fog lamp electrical connectors should only be detached if present. Finish the process by taking out four front bumper cover bolts while directing the bumper cover clip outboard to detach it from the fender before completely removing the front bumper cover. The installation process requires following the opposite steps used for removal.

How to service the rear bumper cover on a wagon on Mercury Sable?

Service of the rear bumper cover for the wagon begins by detaching the load space trim panel and spare tire. First remove all left-hand rear bumper cover to rear quarter panel nuts and right-hand rear bumper cover panel nuts then proceed with rear bumper cover nuts removal. Apply vehicle support with lift equipment to expose four splash shield screws along with two pin-type retainers which can be placed out of the way to reveal rear bumper cover fastening bolts. The two rear bumper cover to rear quarter panel nuts plus pin-type retainers need removal before disconnecting the drain tube and removing all rear bumper cover screws. Before taking out the rear bumper cover it is essential to disconnect the rear side marker light connector from its position between the cover and the body. The installation of the new cover requires execution of the reverse removal steps.

OEM Mercury Sable Bumper Cover

Bumper Shell

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Bumper Covers found

View related parts
Mercury Sable Bumper Cover Part Number: 4F4Z-17K835-BA
$374.54 MSRP: $518.14
You Save: $143.60 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Manufacturer Note: Paint to match
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Mercury Sable | GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Bumper Cover, Front Part Number: 8T5Z-17D957-AAPTM
Product Specifications
- Other Name: Bumper Assembly - Front
- Manufacturer Note: Paint to match
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Bumper Cover Part Number: F8DZ-17K835-AA
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1999 Mercury Sable | GS, LS, LS Premium | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Bumper Cover Part Number: F6DZ-17K835-B
Product Specifications
- Other Name: Cover
- Manufacturer Note: Paint to match
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1999 Mercury Sable | GS, LS, LS Premium | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Bumper Cover Part Number: 8T5Z-17K835-CAPTM
Product Specifications
- Other Name: Cover
- Manufacturer Note: Paint to match
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Bumper Cover Part Number: 8T5Z-17K835-AAPTM
Product Specifications
- Other Name: Cover
- Manufacturer Note: Paint to match
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Bumper Cover, Front Part Number: 4F4Z-17D957-BA
Product Specifications
- Other Name: Bumper Assembly - Front
- Manufacturer Note: Paint to match
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Mercury Sable | GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Bumper Cover Part Number: 2F4Z-17K835-BA
Product Specifications
- Other Name: Cover
- Manufacturer Note: Paint to match
- Replaces: YF4Z-17K835-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2003 Mercury Sable | GS, LS, LS Premium | 3.0L V6, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Bumper Cover, Front Part Number: 2F4Z-17D957-CA
Product Specifications
- Other Name: Bumper Assembly - Front
- Manufacturer Note: Paint to match
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2003 Mercury Sable | GS, LS, LS Premium | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Bumper Cover, Rear Part Number: 2F1Z-17K835-DA
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Manufacturer Note: Paint to match
- Position: Rear
- Replaces: YF1Z-17K835-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Mercury Sable | GS, LS, LS Premium | 3.0L V6, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

Mercury Sable Bumper Cover

OEM Bumper Cover boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Bumper Cover with long life and a perfect fit. Come to our website and find genuine Mercury Sable parts. We keep a wide inventory of OEM Sable parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Mercury Sable Bumper Cover Parts and Q&A

Bumper Cover, Front
2F4Z-17D957-CA
Q: How to remove and install the front bumper cover on all on Mercury Sable?
A:
The first step for front bumper cover removal on all vehicles requires headlamps removal and vehicle support through lifting. The first step includes unsettling five pin-type retainers located under the chin spoiler and next the air dam can be separated by removing seven screws and three bolts. Unscrew thirteen screws from the splash shields on LH and RH front fenders then dismiss their two pin-type retainers before proceeding to remove the front splash shields. The front bumper cover bolts need to come out while also taking out pin-type retainers and the radiator grille specifically on the Taurus model. The Bumper cover on Sable models needs to be unclipped from the support of the radiator grille opening while fog lamp electrical connectors should only be detached if present. Finish the process by taking out four front bumper cover bolts while directing the bumper cover clip outboard to detach it from the fender before completely removing the front bumper cover. The installation process requires following the opposite steps used for removal.
Bumper Cover
4F4Z-17K835-BA
Q: How to service the rear bumper cover on a wagon on Mercury Sable?
A:
Service of the rear bumper cover for the wagon begins by detaching the load space trim panel and spare tire. First remove all left-hand rear bumper cover to rear quarter panel nuts and right-hand rear bumper cover panel nuts then proceed with rear bumper cover nuts removal. Apply vehicle support with lift equipment to expose four splash shield screws along with two pin-type retainers which can be placed out of the way to reveal rear bumper cover fastening bolts. The two rear bumper cover to rear quarter panel nuts plus pin-type retainers need removal before disconnecting the drain tube and removing all rear bumper cover screws. Before taking out the rear bumper cover it is essential to disconnect the rear side marker light connector from its position between the cover and the body. The installation of the new cover requires execution of the reverse removal steps.