How to remove and install the engine mount on Mercury Sable?

The first step to remove the engine mount involves taking off the exhaust flexible pipe. Position a floor jack together with the Oil Pan Holding Fixture under the oil pan making sure the fixture matches with the mounting bosses while maintaining caution against any potential damage. The first step requires removal of the engine coolant degas bottle while the second step involves detaching the wiring harness retainer from the engine mount bracket stud bolt and subsequent removal of the nut and bolt and engine mount brace. After properly removing the four engine mount nuts along with the four engine mount studs it is essential to detach the three bolts and the engine mount from its position. The front cover engine mount stud holes should receive pressurized air cleaning for debris removal before installing the engine mount along with the three bolts while keeping them loose. After cleaning the engine mount studs along with fresh studs apply new thread sealer before screwing in the four engine mount studs which need to be torqued to 20 Nm (177 lb-in). Crank the engine mount bolts which number three to 90 Nm (66 lb-ft) tension while the four engine mount nuts require a torque of 63 Nm (46 lb-ft). The complete installation procedure includes tightening the engine mount brace along with its bolt and nut to 20 Nm (177 lb-in). Subsequently install the wiring harness retainer to the engine mount bracket stud bolt before reattaching the engine coolant degas bottle and the exhaust flexible pipe.

OEM Mercury Sable Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

27 Engine Mounts found

View related parts
Mercury Sable Transmission Mount, Front Upper Part Number: DG1Z-6038-F
$66.30 MSRP: $96.50
You Save: $30.20 (32%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Automatic Transmission Mount, Front Upper; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Upper Trans Mount
- Position: Front Upper
- Replaces: DG1Z-6038-D, 8G1Z-6038-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Mount Bracket, Front Passenger Side Part Number: 8M8Z-6038-A
$63.73 MSRP: $97.90
You Save: $34.17 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Front Engine Mount Support; Right Engine Mount Bracket; Torque Strut; Motor Mount.; Engine Bracket; Front Mount; Front Mount Bracket; Support; Mount
- Manufacturer Note: Bracket
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Front Mount Part Number: 8G1Z-6038-A
$76.38 MSRP: $111.18
You Save: $34.80 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Front; Engine Mount Bracket; Motor Mount; Mount; Insulator
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Torsion Arm, Lower Part Number: 9G1Z-6068-A
$42.16 MSRP: $61.37
You Save: $19.21 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing; Automatic Transmission Mount, Lower; Engine Support Rod; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Lower Mount; Lower Trans Mount; Transmission Mount
- Position: Lower
- Replaces: 8G1Z-6068-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Front Mount Part Number: F7DZ-6038-AA
$160.33 MSRP: $221.79
You Save: $61.46 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Isolator
- Manufacturer Note: 12V
- Replaces: F6DZ-6038-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1999 Mercury Sable | G, GS, LS, LS Premium | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Mount Bracket, Upper Part Number: 8G1Z-6031-A
$51.90 MSRP: $74.25
You Save: $22.35 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Automatic Transmission Mount; Transfer Case Mount; Motor Mount; Transmission Mount Bracket; Transmission Mount
- Position: Upper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Rear Mount Part Number: F6DZ-6068-C
$11.89 MSRP: $16.45
You Save: $4.56 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine; Engine Mount Bracket; Motor Mount; Rear Support; Rear Bracket; Mount; Insulator Assembly - Engine Support
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1995 Mercury Sable | GS, LS | 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Front Mount Part Number: F4DZ-6038-A
$29.75 MSRP: $41.16
You Save: $11.41 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount Bracket; Motor Mount; Front Bracket
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1995 Mercury Sable | GS, LS, LTS | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Front Mount, Driver Side Part Number: F6DZ-6038-C
$51.89 MSRP: $71.78
You Save: $19.89 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount Torque Strut; Engine Mount Bracket; Engine Mount; Motor Mount; Front Bracket; Front Insulator; Mount Insulator; Mount
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1995 Mercury Sable | GS, LS | 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Transmission Mount Part Number: F6DZ-6F063-A
Product Specifications
- Other Name: Insulator Assembly; Engine Mount Torque Strut; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Front Mount; Rear Insulator
- Replaces: F5DZ-6F063-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1999 Mercury Sable | G, GS, LS, LS Premium, LTS | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Front Mount Part Number: YF1Z-6038-AA
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Front; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Isolator; Engine Mount
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Mercury Sable | GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Strut Assembly Part Number: YF1Z-6F050-AA
Product Specifications
- Other Name: Strut; Engine Support Rod; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Mercury Sable | GS, LS | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Transmission Mount, Rear Part Number: 3F1Z-6F063-AA
Product Specifications
- Other Name: Insulator Assembly; Automatic Transmission Mount; Engine Mount Torque Strut; Bracket; Transfer Case Mount; Motor Mount; Rear Insulator
- Position: Rear
- Replaces: YF1Z-6F063-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Mercury Sable | GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Strut Assembly Bracket, Lower Part Number: 4F1Z-6F055-EA
Product Specifications
- Other Name: Bracket; Engine Support Rod Bracket, Lower; Engine Mount Bracket; Motor Mount
- Position: Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Mercury Sable | GS | 6 Cyl 3.0 L FLEX
View related parts
Mercury Sable Front Mount Part Number: E8DZ6038B
Product Specifications
- Other Name: Insulator Assembly; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Mount Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-1991 Mercury Sable | GS, LS | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Oil Pump Part Number: E8DZ-6F063-B
Product Specifications
- Other Name: Insulator Assembly; Engine Mount Bracket; Transmission Mount; Motor Mount; Support Bracket; Front Mount; Overhaul Gasket Set
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1988-1991 Mercury Sable | GS, LS | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Transmission Mount Part Number: F5DZ-6F063-C
Product Specifications
- Other Name: Insulator Assembly; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Support Bracket; Front Mount; Bracket; Insulator
- Manufacturer Note: exc. P/C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1995 Mercury Sable | GS, LS | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Rear Mount Part Number: F7DZ-6068-AA
Product Specifications
- Other Name: Insulator Assembly - Engine; Engine Mount Torque Strut; Engine Mount Bracket; Engine Mount; Motor Mount; Isolator; Insulator Assembly - Engine Support
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1999 Mercury Sable | G, GS, LS, LS Premium | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Front Mount Part Number: F8DZ-6038-AA
Product Specifications
- Other Name: Insulator Assembly; Engine Mount Bracket; Motor Mount; Front Bracket
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992 Mercury Sable | GS, LS | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Rear Mount Part Number: YF1Z-6068-AB
Product Specifications
- Other Name: Insulator; Engine Mount, Rear; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Isolator
- Position: Rear
- Replaces: 4F1Z-6068-AA, F6DZ-6068-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2005 Mercury Sable | G, GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L GAS

| Page 1 of 2 |Next >

1-20 of 27 Results

Mercury Sable Engine Mount

OEM Engine Mount boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Engine Mount with long life and a perfect fit. Come to our website and find genuine Mercury Sable parts. We keep a wide inventory of OEM Sable parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Engine Mount has gained a prestigious reputation when it comes to performance and durability and easing the working of the Mercury Sable automobiles. Intended to decrease direct sound and shaking of the engine operation, this Engine Mount effectively locates the engine and transaxle within chassis, and offers a comfortable ride. Demonstration of its adaptability to various Sable models - ranging from the devices of different generations - underlines its relevance to the safety and performance of automobiles. The Engine Mount consist of enhanced configurations like the hydraulic and the new electronic active mount that alters the stiffness as per the degrees of engine speed to increase performance and feel. Not only they enhance driving comfort but also safeguard key component from getting harm The importance of Engine Mount in the Mercury Sable series. In particular, being one of the most popular Mercury models, the Sable always received these high-quality mounts that were essential to itinerant protection. The Engine Mount has been in the lime light bearing the reputation of innovation and in relation to the demands of the automotive market, the Mount delivers efficiency and safety on the road for the users. Whether the car is being driven through city roads or highways the Engine Mount is still important as it makes the car to perform as is expected.

Mercury Sable Engine Mount Parts and Q&A

Front Mount
8G1Z-6038-A
Q: How to remove and install the engine mount on Mercury Sable?
A:
The first step to remove the engine mount involves taking off the exhaust flexible pipe. Position a floor jack together with the Oil Pan Holding Fixture under the oil pan making sure the fixture matches with the mounting bosses while maintaining caution against any potential damage. The first step requires removal of the engine coolant degas bottle while the second step involves detaching the wiring harness retainer from the engine mount bracket stud bolt and subsequent removal of the nut and bolt and engine mount brace. After properly removing the four engine mount nuts along with the four engine mount studs it is essential to detach the three bolts and the engine mount from its position. The front cover engine mount stud holes should receive pressurized air cleaning for debris removal before installing the engine mount along with the three bolts while keeping them loose. After cleaning the engine mount studs along with fresh studs apply new thread sealer before screwing in the four engine mount studs which need to be torqued to 20 Nm (177 lb-in). Crank the engine mount bolts which number three to 90 Nm (66 lb-ft) tension while the four engine mount nuts require a torque of 63 Nm (46 lb-ft). The complete installation procedure includes tightening the engine mount brace along with its bolt and nut to 20 Nm (177 lb-in). Subsequently install the wiring harness retainer to the engine mount bracket stud bolt before reattaching the engine coolant degas bottle and the exhaust flexible pipe.