My Garage
Cart
Make sure this part fits

Ford 5F9Z-2C028-BA
Backing Plate, Rear Passenger Side

2005-2009 Ford 5F9Z2C028BA

Customer Questions & Expert Answers (7)
Ford 5F9Z-2C028-BA Backing Plate, Rear Passenger Side
  • Part Description
    Shield - Brake Disc; Brake Dust Shield, Rear Right
  • Base No.
    2C028
  • Position
    Rear Passenger Side
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Ford Five HundredLimited, SE, SEL6 Cyl 3.0 L GAS
    2005-2007 Ford FreestyleLimited, SE, SEL6 Cyl 3.0 L GAS
    2008-2009 Ford TaurusLimited, SE, SEL6 Cyl 3.5 L GAS
    2008-2009 Ford Taurus XEddie Bauer, Limited, SEL6 Cyl 3.5 L GAS
    2005-2007 Mercury MontegoLuxury, Premier6 Cyl 3.0 L GAS
    2008-2009 Mercury SableBase, Premier6 Cyl 3.5 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Do you think this 5F9Z-2C028-BA will fit my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 5F9Z-2C028-BA fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How do you complete the installation for the 2006 Ford Five Hundred? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Dust Shields
    Q:
    What is the first step to service and repair the brake rotor/disc for the 2006 Ford Freestyle? Posted by Customer
    A:
    Begin by removing the brake disc.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Dust Shields
    Q:
    What is the first step to remove and replace the brake rotor/disc for the 2008 Ford Taurus? Posted by Customer
    A:
    First, remove the brake disc.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Dust Shields
    Q:
    What should be done after removing the brake disc for the 2008 Ford Taurus X? Posted by Customer
    A:
    Next, take out the three bolts securing the brake disc shield.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Dust Shields
    Q:
    What is the first step to remove the brake rotor/disc for the 2007 Mercury Montego? Posted by Customer
    A:
    First, take off the brake disc by removing the 3 bolts securing the brake disc shield.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Dust Shields
    Q:
    What is the torque specification for tightening the bolts when installing the brake disc shield for the 2008 Mercury Sable? Posted by Customer
    A:
    Tighten the bolts to 14 Nm (10 lb-ft).
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Dust Shields
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Backing Plate, Rear Passenger Side 5F9Z-2C028-BA Designed for Proper Fit and Performance

The Ford part 5F9Z-2C028-BA Backing Plate, Rear Passenger Side as a genuine Ford Brake Backing Plate, Brake Dust Shields component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford 5F9Z-2C028-BA Backing Plate, Rear Passenger Side is used with Ford Taurus, Five Hundred, Freestyle vehicles and Mercury Montego, Sable models. The original Ford part will bear the manufacturer part number: 5F9Z-2C028-BA and where it is made at Ford. It has been specifically developed to fit the Rear Passenger Side and has the code: 2C028.
This component is approximately 0.90 Pounds. The part 5F9Z2C028BA is available in New condition while meeting the standards of the product rating. The Shield - Brake Disc; Brake Dust Shield, Rear Right belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part 5F9Z-2C028-BA can be known as Splash Shield; Shield - Brake Disc Splash; Brake Dust Shield. The inventory reference for this item is SKU: 5F9Z-2C028-BA. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.