Ford 6F9Z-13341-AA
Turn Signal Switch

Start turn signal switch service and repair by first taking out the steering wheel then accessing the upper steering column shroud by pressing its sides inward. You should remove the steering column cover first by taking out the three screws which hold it in place. The next operation calls for dismantling of the three screws securing the lower steering column shroud before removing the lower shroud. The multi-function switch requires disconnecting its three electrical connectors before removing the four securing screws. The installation process requires following all steps backward of what was used for removal.

Starting the repair and servicing operation for the turn signal switch requires you to remove the steering wheel. You should carefully push the sides to take out the upper steering column shroud. The first step requires you to unscrew the three lower steering column shroud screws as well as remove the shroud component itself. Service the turn signal switch by disconnecting the upper and lower multi-function switch electrical connectors starting with the lower. The four screws which secure the multi-function switch need removal before extracting the switch. The final step of installation requires following the opposite steps of removal.

Repair and servicing of the turn signal switch starts with separating the steering wheel from its position. The upper steering column shroud can be taken out by gently pressing the sides. You must extract the three screws from the lower steering column shroud before you eliminate the shroud from its position. First detach the four electrical connectors from the lower multi-function switch before disconnecting the upper multi-function switch electrical connector. Unscrew the four screws which keep the multi-function switch mounted before pulling out the switch from its position. The installation process follows the reversal of all steps performed while removing the components.

The first step to fix or maintain the turn signal switch starts with steering wheel removal. The instrument cluster finish panel should be removed along with the steering column upper shroud as an assembly after unscrewing the 2 instrument cluster finish panel screws and pressing the upper steering column shroud sides to separate it from the lower shroud. The lower steering column shroud can be removed by removing its 3 retaining screws before taking out the shroud itself. Start by disconnecting the 3 electrical plugs before uninstalling the multifunction switch with its 4 retaining screws. Reverse installation steps should be performed to finish the operation.

The first step to fix or maintain the turn signal switch starts with steering wheel removal. The instrument cluster finish panel should be removed along with the steering column upper shroud as an assembly after unscrewing the 2 instrument cluster finish panel screws and pressing the upper steering column shroud sides to separate it from the lower shroud. The lower steering column shroud can be removed by removing its 3 retaining screws before taking out the shroud itself. Start by disconnecting the 3 electrical plugs before uninstalling the multifunction switch with its 4 retaining screws. Reverse installation steps should be performed to finish the operation.

Take out the three screws securing the lower steering column shroud and remove the shroud itself.

Remove the four bolts holding the steering column opening cover reinforcement, ensuring to tighten them to 9 Nm (80 lb-in) upon reinstallation.

Take out the three lower steering column shroud screws and the shroud itself.