My Garage
Cart
Cooling System

2006 Mercury Milan Thermostat, Coolant Reservoir

Currently shopping for
2006 Mercury Milan
Change Vehicle
Categories Close X

Currently selected

Other Categories

A/C & Heating
Air & Fuel Delivery
Body & Hardware
Brakes
Charging & Starting
Driveline & Axles
Electrical
Emission Control & Exhaust
Engine
Headlights & Lighting
Interior & Exterior Trim
Maintenance & Lubrication
Steering
Suspension
Transmission
Categories Close X
2 diagrams found for the vehicle you selected.Select your vehicle options to narrow down results.
  • 1.Cooling System - Cooling System (6 Cyl 3.0 L)
    2006 Mercury Milan Cooling System Diagram 1 - Thumbnail
  • 2.Cooling System - Water Pump (4 Cyl 2.3 L)
    2006 Mercury Milan Cooling System Diagram 2 - Thumbnail
Sort by:
Ref No.
Ref No.
Part No. & Part Description
Price & Qty.
Part No. &
Part Description
  • -W500015-S309
    Screw
    • Part Notes: M6 x 25MM
    • Production Date: 08/2005-07/2012
    • Fitting Vehicle Options: 4 Cyl 2.3L
    • Callout Name: HS1
    • Replaced By: -W500015-S437
    MSRP: $4.00 Your Price: $2.35
  • 6E5Z-8260-BA
    Hose Assy
    • Production Date: 08/2005-08/2006
    • Fitting Vehicle Options: 6 Cyl 3.0L DOHC EFI
    • Callout Name: 8260
    • Replaced By: 9E5Z-8260-F
    MSRP: $71.82 Your Price: $46.02
  • Mercury 6E5Z-8260-AA Hose Assy
    6E5Z-8260-AA
    Hose Assy
    • Production Date: 08/2005-07/2012
    • Fitting Vehicle Options: 4 Cyl 2.3L
    • Callout Name: 8260
    • Replaced By: AE5Z-8260-B
    MSRP: $42.55 Your Price: $26.79

OEM 2006 Mercury Milan Parts for Cooling System

Genuine OEM 2006 Mercury Milan parts are made using the original design, the high standards, in the Mercury official factories, and all of these ensure that they always fit perfectly and easily. FordPartsDeal.com is a trusted source for finding these authentic OEM Cooling System parts at very competitive prices. Our professional team is here to help you choose the right 2006 Mercury Milan Thermostat, Coolant Reservoir, and our fast delivery options ensure that your parts are always delivered quickly.

Coolant Reservoir, Thermostat Installation and Repair Tips for 2006 Mercury Milan

  • Q: How to service the thermostat and thermostat housing assembly for the 2.3L engine on 2006 Mercury Milan?
    A: In order to service the thermostat and housing on the 2.3L engine, lift the vehicle, empty the cooling system and remove the accessory drive belt. Loosen hoses, take off the housing bolts and throw away the old gasket. Install the new housing and new gasket, screw-clamp bolts 10 Nm and re-fill cooling system.
  • Q: How to service the coolant reservoir on 2006 Mercury Milan?
    A: To service the coolant reservoir, drain cooling system, and then unhook upper and lower degas bottle hose. Install the new nut and bolt to fasten the degas bottle and tighten to 9 Nm (80 inch lbs. ) using the nut and bolt. Undo the steps of removings and fill up the cooling system.
See All Installation and Repair Tips