How to service the Knock Sensor on 2000 Ford Excursion?

Start the Knock Sensor service procedure by taking out the upper intake manifold. The first step involves disconnecting the Knock Sensor (KS) electrical connector along with unbolt the KS from its position. Installation of the device requires performing the reverse order of removal steps while aligning the black tapered portion toward upward direction.

OEM 2000 Ford Excursion Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2000 Ford Excursion Knock Sensor
Part Number: XL3Z-12A699-AA
$36.36 MSRP: $56.75
You Save: $20.39 (36%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Engine Knock; Ignition Knock (Detonation) Sensor
- Base No.: 12A699
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.3 x 2.5 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-12A699-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL

2000 Ford Excursion Knock Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Excursion Knock Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Excursion Knock Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Excursion Knock Sensor Parts Questions & Experts Answers

Q: How to service the Knock Sensor on 2000 Ford Excursion?
A: Start the Knock Sensor service procedure by taking out the upper intake manifold. The first step involves disconnecting the Knock Sensor (KS) electrical connector along with unbolt the KS from its position. Installation of the device requires performing the reverse order of removal steps while aligning the black tapered portion toward upward direction.