How to service and repair the vacuum brake booster on 2000 Ford Ranger?

Start vacuum brake booster maintenance by unhooking the hose from the power brake booster through the clamp compression method after taking off the brake master cylinder. The brake pedal service requires disconnecting it from the power brake booster push rod by removing the self-locking pin followed by taking out the stoplight switch and brake booster push rod from the brake pedal pin then the brake booster push rod bushing. The next step should be to free the bulkhead sound insulator while properly supporting the power brake booster before removing the nuts. Follow the opposite sequence of the removal process to install the component.

OEM 2000 Ford Ranger Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Booster found

View related parts
2000 Ford Ranger Brake Booster
Part Number: 6L5Z-2005-AA
Product Specifications
- Other Name: Booster Assembly - Brake; Power Brake Booster; Booster Assembly
- Replaces: 3L5Z-2005-AA
- Base No.: 2005
- Item Weight: 9.20 Pounds
- Item Dimensions: 11.1 x 10.5 x 13.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-2005-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2000 Ford Ranger Brake Booster

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Ranger Brake Booster available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Ranger Brake Booster as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Ranger Brake Booster Parts Questions & Experts Answers

Q: How to service and repair the vacuum brake booster on 2000 Ford Ranger?
A: Start vacuum brake booster maintenance by unhooking the hose from the power brake booster through the clamp compression method after taking off the brake master cylinder. The brake pedal service requires disconnecting it from the power brake booster push rod by removing the self-locking pin followed by taking out the stoplight switch and brake booster push rod from the brake pedal pin then the brake booster push rod bushing. The next step should be to free the bulkhead sound insulator while properly supporting the power brake booster before removing the nuts. Follow the opposite sequence of the removal process to install the component.