How should gas pressurized shock absorbers be serviced to ensure safety and proper performance on 2000 Lincoln LS?

The service of gas pressurized shock absorbers demands careful handling since they might extend automatically which creates a risk of bodily harm. A spring compressor serves as essential equipment for shock absorber and spring assembly disassembly because the intense load demands it. The performance of crucial systems depends on proper suspension fasteners so replacements require new parts bearing identical numbers which need to follow assembly torque values for appropriate retention. Start procedure by taking out the shock absorber and spring assembly and afterward position it for future reference. Set the assembly inside a vise before marking the shock absorber together with the spring and upper mount. Install the shock absorber rod into the spring compressor while compressing the spring until you can remove the nut and combine the upper mount with its dust boot. You should proceed with removing both the spring and spring compressor. Inspect lower and upper spring seats for damage during assembly before checking the spring insulator for wear and performing a replacement if required. You should install a new spring bearing the number found on the Vehicle Certification label and make sure there are no nicks or scratches on it. Install the spring and spring compressor to the shock absorber before joining the upper mount and dust boot to their marked positions. Then apply a new nut. Remove the spring compressor before placing the vise-free shock absorber along with spring assembly back into the car.

OEM 2000 Lincoln LS Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Shock Absorbers found

View related parts
2000 Lincoln LS Strut
Part Number: BU2Z-18V124-S
$80.40 MSRP: $109.41
You Save: $29.01 (27%)
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly
- Base No.: 18124
- Item Weight: 7.80 Pounds
- Item Dimensions: 4.0 x 3.9 x 24.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BU2Z-18V124-S
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Lincoln LS Submodels:
- Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2000 Lincoln LS Strut, Front
Part Number: BU2Z-18V124-R
Product Specifications
- Other Name: Shock Absorber Assembly - Front
- Position: Front
- Replaces: 1W4Z-18124-DA, AST-25
- Base No.: 18124
- Item Weight: 7.80 Pounds
- Item Dimensions: 26.3 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BU2Z-18V124-R
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Lincoln LS Submodels:
- Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2000 Lincoln LS Strut
Part Number: 1W4Z-18124-AA
Product Specifications
- Other Name: Shock Absorber Assembly
- Manufacturer Note: Red
- Base No.: 18124
- Item Weight: 6.90 Pounds
- Item Dimensions: 27.0 x 4.4 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 1W4Z-18124-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Lincoln LS Submodels:
- Base, LSE | 6 Cyl 3.0 L GAS
View related parts
2000 Lincoln LS Shock Absorber
Part Number: BU2Z-18V125-V
Product Specifications
- Other Name: Shock Absorber Assembly; Strut
- Base No.: 18V125
- Item Weight: 6.50 Pounds
- Item Dimensions: 4.6 x 4.7 x 23.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BU2Z-18V125-V
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Lincoln LS Submodels:
- Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2000 Lincoln LS Shock Absorber
Part Number: BU2Z-18V125-U
Product Specifications
- Other Name: Shock Absorber Assembly; Strut
- Base No.: 18V125
- Item Weight: 6.70 Pounds
- Item Dimensions: 4.5 x 4.6 x 22.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BU2Z-18V125-U
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Lincoln LS Submodels:
- Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2000 Lincoln LS Strut
Part Number: BU2Z-18V124-Q
Product Specifications
- Other Name: Shock Absorber Assembly
- Base No.: 18124
- Item Weight: 7.50 Pounds
- Item Dimensions: 3.9 x 4.1 x 24.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BU2Z-18V124-Q
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Lincoln LS Submodels:
- Base, LSE | 8 Cyl 3.9 L GAS
View related parts
2000 Lincoln LS Strut
Part Number: 5U2Z-18V124-H
Product Specifications
- Other Name: Kit - Shock Absorber
- Replaces: XW4Z-18124-FA, XW4Z-18124-BA, XW4Z-18124-AA, XW4Z-18124-EA
- Base No.: 18124
- Item Weight: 7.80 Pounds
- Item Dimensions: 23.9 x 5.7 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5U2Z-18V124-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Lincoln LS Submodels:
- Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2000 Lincoln LS Strut
Part Number: 1W4Z-18124-FA
Product Specifications
- Other Name: Shock Absorber Assembly
- Manufacturer Note: BROWN
- Base No.: 18124
- Item Weight: 7.50 Pounds
- Item Dimensions: 27.0 x 4.5 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 1W4Z-18124-FA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Lincoln LS Submodels:
- Base, LSE | 8 Cyl 3.9 L GAS
View related parts
2000 Lincoln LS Strut
Part Number: 1W4Z-18124-EA
Product Specifications
- Other Name: Shock Absorber Assembly
- Manufacturer Note: Silver
- Base No.: 18124
- Item Weight: 9.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 1W4Z-18124-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Lincoln LS Submodels:
- Base, LSE | 6 Cyl 3.0 L GAS
View related parts
2000 Lincoln LS Shock Absorber
Part Number: 5U2Z-18V125-VA
Product Specifications
- Other Name: Kit - Shock Absorber; Strut
- Base No.: 18125
- Item Weight: 6.70 Pounds
- Item Dimensions: 5.1 x 5.1 x 22.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5U2Z-18V125-VA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Lincoln LS Submodels:
- Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS

2000 Lincoln LS Shock Absorber

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Lincoln LS Shock Absorber available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Lincoln LS Shock Absorber as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Lincoln LS Shock Absorber Parts Questions & Experts Answers

Q: How should gas pressurized shock absorbers be serviced to ensure safety and proper performance on 2000 Lincoln LS?
A: The service of gas pressurized shock absorbers demands careful handling since they might extend automatically which creates a risk of bodily harm. A spring compressor serves as essential equipment for shock absorber and spring assembly disassembly because the intense load demands it. The performance of crucial systems depends on proper suspension fasteners so replacements require new parts bearing identical numbers which need to follow assembly torque values for appropriate retention. Start procedure by taking out the shock absorber and spring assembly and afterward position it for future reference. Set the assembly inside a vise before marking the shock absorber together with the spring and upper mount. Install the shock absorber rod into the spring compressor while compressing the spring until you can remove the nut and combine the upper mount with its dust boot. You should proceed with removing both the spring and spring compressor. Inspect lower and upper spring seats for damage during assembly before checking the spring insulator for wear and performing a replacement if required. You should install a new spring bearing the number found on the Vehicle Certification label and make sure there are no nicks or scratches on it. Install the spring and spring compressor to the shock absorber before joining the upper mount and dust boot to their marked positions. Then apply a new nut. Remove the spring compressor before placing the vise-free shock absorber along with spring assembly back into the car.