How should gas pressurized shock absorbers be serviced to ensure safety and proper performance on 2001 Lincoln LS?

Persons who maintain gas pressurized shock absorbers need to be cautious since these components automatically extend without assistance and create potential dangers for their personal safety. A spring compressor should be used always when disassembling shock absorber and spring assemblies because of the immense operating load. The essential performance of vital systems depends on proper usage of Suspension fasteners which requires installers to use new parts with same part numbers and adhere to precise torque values during reassembly. The first task involves unmounting the shock absorber and spring assembly but avoid tightening the vise excessively to protect the shock absorber tube from harm. Apply reference marks to the upper mount and shock absorber and spring before installing a spring compressor to compress the spring. To start remove the shock absorber rod while holding it then discard and remove the nut before taking off the combined upper mount and dust boot followed by safe removal of spring and spring compressor. The inspection of lower and upper spring seats during assembly should determine any sign of damage and check if the spring insulator shows wear which requires a replacement of the upper mount. The replacement process requires use of the proper spring part number from vehicle certification label information and precise inspection of the spring paint for any damage. Hang the shock absorber in the vise before you put on the spring and spring compressor which should sit on the strut followed by the upper mount and dust boot maintaining the same alignment as previously observed during breakdown. Proceed with installing the new nut before taking out the spring compressor followed by shock absorber and spring assembly installation.

OEM 2001 Lincoln LS Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Shock Absorbers found

View related parts
2001 Lincoln LS Strut
Part Number: BU2Z-18V124-S
$80.40 MSRP: $109.41
You Save: $29.01 (27%)
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly
- Base No.: 18124
- Item Weight: 7.80 Pounds
- Item Dimensions: 4.0 x 3.9 x 24.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BU2Z-18V124-S
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Lincoln LS Submodels:
- Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2001 Lincoln LS Strut, Front
Part Number: BU2Z-18V124-R
Product Specifications
- Other Name: Shock Absorber Assembly - Front
- Position: Front
- Replaces: 1W4Z-18124-DA, AST-25
- Base No.: 18124
- Item Weight: 7.80 Pounds
- Item Dimensions: 26.3 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BU2Z-18V124-R
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Lincoln LS Submodels:
- Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2001 Lincoln LS Strut
Part Number: 1W4Z-18124-AA
Product Specifications
- Other Name: Shock Absorber Assembly
- Manufacturer Note: Red
- Base No.: 18124
- Item Weight: 6.90 Pounds
- Item Dimensions: 27.0 x 4.4 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 1W4Z-18124-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Lincoln LS Submodels:
- Base, LSE | 6 Cyl 3.0 L GAS
View related parts
2001 Lincoln LS Shock Absorber
Part Number: BU2Z-18V125-V
Product Specifications
- Other Name: Shock Absorber Assembly; Strut
- Base No.: 18V125
- Item Weight: 6.50 Pounds
- Item Dimensions: 4.6 x 4.7 x 23.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BU2Z-18V125-V
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Lincoln LS Submodels:
- Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2001 Lincoln LS Shock Absorber
Part Number: BU2Z-18V125-U
Product Specifications
- Other Name: Shock Absorber Assembly; Strut
- Base No.: 18V125
- Item Weight: 6.70 Pounds
- Item Dimensions: 4.5 x 4.6 x 22.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BU2Z-18V125-U
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Lincoln LS Submodels:
- Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2001 Lincoln LS Strut
Part Number: BU2Z-18V124-Q
Product Specifications
- Other Name: Shock Absorber Assembly
- Base No.: 18124
- Item Weight: 7.50 Pounds
- Item Dimensions: 3.9 x 4.1 x 24.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BU2Z-18V124-Q
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Lincoln LS Submodels:
- Base, LSE | 8 Cyl 3.9 L GAS
View related parts
2001 Lincoln LS Strut
Part Number: 5U2Z-18V124-H
Product Specifications
- Other Name: Kit - Shock Absorber
- Replaces: XW4Z-18124-FA, XW4Z-18124-BA, XW4Z-18124-AA, XW4Z-18124-EA
- Base No.: 18124
- Item Weight: 7.80 Pounds
- Item Dimensions: 23.9 x 5.7 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5U2Z-18V124-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Lincoln LS Submodels:
- Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2001 Lincoln LS Strut
Part Number: 1W4Z-18124-FA
Product Specifications
- Other Name: Shock Absorber Assembly
- Manufacturer Note: BROWN
- Base No.: 18124
- Item Weight: 7.50 Pounds
- Item Dimensions: 27.0 x 4.5 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 1W4Z-18124-FA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Lincoln LS Submodels:
- Base, LSE | 8 Cyl 3.9 L GAS
View related parts
2001 Lincoln LS Strut
Part Number: 1W4Z-18124-EA
Product Specifications
- Other Name: Shock Absorber Assembly
- Manufacturer Note: Silver
- Base No.: 18124
- Item Weight: 9.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 1W4Z-18124-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Lincoln LS Submodels:
- Base, LSE | 6 Cyl 3.0 L GAS
View related parts
2001 Lincoln LS Shock Absorber
Part Number: 5U2Z-18V125-VA
Product Specifications
- Other Name: Kit - Shock Absorber; Strut
- Base No.: 18125
- Item Weight: 6.70 Pounds
- Item Dimensions: 5.1 x 5.1 x 22.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5U2Z-18V125-VA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Lincoln LS Submodels:
- Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS

2001 Lincoln LS Shock Absorber

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Lincoln LS Shock Absorber available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Lincoln LS Shock Absorber as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2001 Lincoln LS Shock Absorber Parts Questions & Experts Answers

Q: How should gas pressurized shock absorbers be serviced to ensure safety and proper performance on 2001 Lincoln LS?
A: Persons who maintain gas pressurized shock absorbers need to be cautious since these components automatically extend without assistance and create potential dangers for their personal safety. A spring compressor should be used always when disassembling shock absorber and spring assemblies because of the immense operating load. The essential performance of vital systems depends on proper usage of Suspension fasteners which requires installers to use new parts with same part numbers and adhere to precise torque values during reassembly. The first task involves unmounting the shock absorber and spring assembly but avoid tightening the vise excessively to protect the shock absorber tube from harm. Apply reference marks to the upper mount and shock absorber and spring before installing a spring compressor to compress the spring. To start remove the shock absorber rod while holding it then discard and remove the nut before taking off the combined upper mount and dust boot followed by safe removal of spring and spring compressor. The inspection of lower and upper spring seats during assembly should determine any sign of damage and check if the spring insulator shows wear which requires a replacement of the upper mount. The replacement process requires use of the proper spring part number from vehicle certification label information and precise inspection of the spring paint for any damage. Hang the shock absorber in the vise before you put on the spring and spring compressor which should sit on the strut followed by the upper mount and dust boot maintaining the same alignment as previously observed during breakdown. Proceed with installing the new nut before taking out the spring compressor followed by shock absorber and spring assembly installation.