How to Service and Repair the Sway Bar Link on 2000 Mercury Sable?

You should start servicing and repairing the sway bar link by removing the wheel assembly with careful attention to not use tools that generate power on nuts to stop damaging sway bar link ball joints or boots. Use the hex holding feature to stabilize the ball joints on the sway bar link before removing the nuts. After that, loosen and disconnect the nuts. Start the sway bar link service by disconnecting (5K484) through nut removal then proceed to remove the sway bar link because both parts must be discarded. New nuts are required during installation and the hex holding feature should be used to stop sway bar link ball joints from turning when securing the nuts. To obtain proper retention of essential parts tighten the nuts to their specified torque settings using a torque wrench and socket.

OEM 2000 Mercury Sable Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Sway Bar Links found

View related parts
2000 Mercury Sable Stabilizer Link, Front Driver Side
Part Number: 3F1Z-5K483-A
$30.14 MSRP: $41.01
You Save: $10.87 (27%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front Left; Suspension Stabilizer Bar Link Kit; Sway Bar Link Kit; Sway Bar Link; Link Assembly; Link End
- Position: Front Driver Side
- Replaces: MEF-175, 3F1Z-5K483-AA
- Item Weight: 1.00 Pounds
- Item Dimensions: 3.4 x 3.5 x 13.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F1Z-5K483-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Mercury Sable Submodels:
- GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2000 Mercury Sable Stabilizer Link, Front Passenger Side
Part Number: 3F1Z-5K484-A
$30.97 MSRP: $42.14
You Save: $11.17 (27%)
ADD TO CART
Product Specifications
- Other Name: Link; Front Right Suspension Stabilizer Bar Link Kit; Sway Bar Link; Link Assembly; Link End
- Position: Front Passenger Side
- Replaces: MEF-180, 3F1Z-5K484-AA
- Item Weight: 1.00 Pounds
- Item Dimensions: 3.3 x 3.4 x 12.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F1Z-5K484-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Mercury Sable Submodels:
- GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2000 Mercury Sable Sway Bar Link

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Mercury Sable Sway Bar Link available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Mercury Sable Sway Bar Link as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Mercury Sable Sway Bar Link Parts Questions & Experts Answers

Q: How to Service and Repair the Sway Bar Link on 2000 Mercury Sable?
A: You should start servicing and repairing the sway bar link by removing the wheel assembly with careful attention to not use tools that generate power on nuts to stop damaging sway bar link ball joints or boots. Use the hex holding feature to stabilize the ball joints on the sway bar link before removing the nuts. After that, loosen and disconnect the nuts. Start the sway bar link service by disconnecting (5K484) through nut removal then proceed to remove the sway bar link because both parts must be discarded. New nuts are required during installation and the hex holding feature should be used to stop sway bar link ball joints from turning when securing the nuts. To obtain proper retention of essential parts tighten the nuts to their specified torque settings using a torque wrench and socket.