How to Service and Repair the Sway Bar Link on Mercury Sable?

Begin sway bar link servicing and repair work by removing the wheel with tire safely secured yet avoid power tools when dealing with sway bar link ball joints or boots to prevent their damage. Use the hex holding feature to stop sway bar link ball joints from moving as you first loosen the nuts before their removal. The sway bar link disconnection process starts by unthreading its retaining nut and discarding it while removing both the nut and sway bar link and discarding this nut as well. New nuts should be installed before reusing the hex holding feature to stop sway bar link ball joints from turning while tightening the nuts. The installation process requires following the removal procedure in reverse order while using a socket with torque wrench to tighten the specified torque-limiting nuts. The service will face major problems if you install any part with a different number than the specified one or use low-quality parts as substitutes.

OEM Mercury Sable Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Sway Bar Links found

View related parts
Mercury Sable Stabilizer Link, Front Passenger Side Part Number: 3F1Z-5K484-A
$30.97 MSRP: $42.14
You Save: $11.17 (27%)
ADD TO CART
Product Specifications
- Other Name: Link; Front Right Suspension Stabilizer Bar Link Kit; Sway Bar Link; Link Assembly; Link End
- Position: Front Passenger Side
- Replaces: MEF-180, 3F1Z-5K484-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Mercury Sable | GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Stabilizer Link, Front Driver Side Part Number: 3F1Z-5K483-A
$30.14 MSRP: $41.01
You Save: $10.87 (27%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front Left; Suspension Stabilizer Bar Link Kit; Sway Bar Link Kit; Sway Bar Link; Link Assembly; Link End
- Position: Front Driver Side
- Replaces: MEF-175, 3F1Z-5K483-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Mercury Sable | GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Stabilizer Link, Passenger Side Part Number: 2F1Z-5K484-BA
$35.84 MSRP: $56.91
You Save: $21.07 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link Kit; Sway Bar Link; Link Assembly; Link End
- Position: Passenger Side
- Replaces: 1F1Z-5K484-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1999 Mercury Sable | G, GS, LS, LS Premium | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Stabilizer Link, Driver Side Part Number: 2F1Z-5K483-BA
$42.37 MSRP: $67.27
You Save: $24.90 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link Kit; Sway Bar Link; Link Assembly; Link End
- Position: Driver Side
- Replaces: 1F1Z-5K483-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1999 Mercury Sable | G, GS, LS, LS Premium | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Stabilizer Link, Front Driver Side Part Number: 7F9Z-5K483-L
$37.29 MSRP: $60.91
You Save: $23.62 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link Kit, Front Left/Right.; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front Driver Side
- Replaces: 5F9Z-5K483-AL
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Stabilizer Link Part Number: F4DZ-5K484-A
$115.88 MSRP: $194.55
You Save: $78.67 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link Kit; Sway Bar Link
- Manufacturer Note: RH & LH
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-1995 Mercury Sable | GS, LS, LTS | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Stabilizer Link, Rear Part Number: 7F9Z-5K484-S
$31.24 MSRP: $42.51
You Save: $11.27 (27%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Rear; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Rear
- Replaces: 5F9Z-5K484-AS
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Stabilizer Link, Front Passenger Side Part Number: 7F9Z-5K484-R
$38.29 MSRP: $62.55
You Save: $24.26 (39%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link Kit, Front Left/Right.; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front Passenger Side
- Replaces: 5F9Z-5K484-AR
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS

Mercury Sable Sway Bar Link

OEM Sway Bar Link boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Sway Bar Link with long life and a perfect fit. Come to our website and find genuine Mercury Sable parts. We keep a wide inventory of OEM Sable parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Mercury Sable Sway Bar Link is an important part that has a great impact to the reliability and fascinating performance of the vehicle in the market. This Sway Bar Link links the sway bar to the control arm and offers control of body roll during cornering or any lateral force while steering. With the service of completely ensuring uninterrupted motion transfer, Mercury Sable Sway Bar Link makes its contribution to driving behavior enhancement, and this is so vital for efficiency as well as safety. Being a Sway Bar Link compatible with different Mercury Sable car models on different generations, the focus is on providing stable and comfortable ride. The Mercury Sable, being an amulet of innovation and sound construction, has enjoying a reputation for dependability, and the Sway Bar Link is no rogue racing vehicle part. That it can lock up on the inside tire while exerting force on the other end helps in handling performance and is therefore a significant component of the Sable's suspension assembly. Also, the Mercury Sable Sway Bar Link is noteworthy since it is made from strong materials and is ascertained for excellent performance due to the appropriate engineering. For this reason, the Mercury Sable Sway Bar Link also improves the car handling performance and at the same time offers the reliability and safety that Sable owners require to increase vehicle performance safely.

Mercury Sable Sway Bar Link Parts and Q&A

Stabilizer Link, Front Passenger Side
3F1Z-5K484-A
Q: How to Service and Repair the Sway Bar Link on Mercury Sable?
A:
Begin sway bar link servicing and repair work by removing the wheel with tire safely secured yet avoid power tools when dealing with sway bar link Ball Joints or boots to prevent their damage. Use the hex holding feature to stop sway bar link ball joints from moving as you first loosen the nuts before their removal. The sway bar link disconnection process starts by unthreading its retaining nut and discarding it while removing both the nut and sway bar link and discarding this nut as well. New nuts should be installed before reusing the hex holding feature to stop sway bar link ball joints from turning while tightening the nuts. The installation process requires following the removal procedure in reverse order while using a socket with torque wrench to tighten the specified torque-limiting nuts. The service will face major problems if you install any part with a different number than the specified one or use low-quality parts as substitutes.