How to service and repair the shock absorber and spring assembly on 2002 Lincoln LS?

You should start the shock absorber and spring assembly repair process by removing the wheel together with its tire. Utilize the hex holding function to stabilize the stud before you unfasten the nut then disconnect the stabilizer link bar and dispose of the nut. First disconnect the shock absorber and spring assembly by removing the nut and bolt whereas both parts should be discarded. Rephrase the following sentence. The maintenance starts with lowering the vehicle slightly before taking off the right shock-mount cover followed by removing the retainers then the left shock-mount cover. Maintaining the center nut must remain installed since its removal will create spring tension danger that put people at risk of getting injured. Discard the four nuts before taking out the shock absorber and spring assembly component. Perform part installation only when shock absorber lower bushings contain their end caps. The removal step can be reverted by following specified torque guidelines to maintain correct part retention. Reliability of the suspension system depends on swapping old components with parts using the exact same part number since it minimizes usage of substandard replacement designs.

OEM 2002 Lincoln LS Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Shock Absorbers found

View related parts
2002 Lincoln LS Strut
Part Number: BU2Z-18V124-S
$80.40 MSRP: $109.41
You Save: $29.01 (27%)
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly
- Base No.: 18124
- Item Weight: 7.80 Pounds
- Item Dimensions: 4.0 x 3.9 x 24.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BU2Z-18V124-S
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Lincoln LS Submodels:
- Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2002 Lincoln LS Strut, Front
Part Number: BU2Z-18V124-R
Product Specifications
- Other Name: Shock Absorber Assembly - Front
- Position: Front
- Replaces: 1W4Z-18124-DA, AST-25
- Base No.: 18124
- Item Weight: 7.80 Pounds
- Item Dimensions: 26.3 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BU2Z-18V124-R
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Lincoln LS Submodels:
- Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2002 Lincoln LS Strut
Part Number: 1W4Z-18124-AA
Product Specifications
- Other Name: Shock Absorber Assembly
- Manufacturer Note: Red
- Base No.: 18124
- Item Weight: 6.90 Pounds
- Item Dimensions: 27.0 x 4.4 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 1W4Z-18124-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Lincoln LS Submodels:
- Base, LSE | 6 Cyl 3.0 L GAS
View related parts
2002 Lincoln LS Shock Absorber
Part Number: BU2Z-18V125-V
Product Specifications
- Other Name: Shock Absorber Assembly; Strut
- Base No.: 18V125
- Item Weight: 6.50 Pounds
- Item Dimensions: 4.6 x 4.7 x 23.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BU2Z-18V125-V
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Lincoln LS Submodels:
- Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2002 Lincoln LS Shock Absorber
Part Number: BU2Z-18V125-U
Product Specifications
- Other Name: Shock Absorber Assembly; Strut
- Base No.: 18V125
- Item Weight: 6.70 Pounds
- Item Dimensions: 4.5 x 4.6 x 22.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BU2Z-18V125-U
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Lincoln LS Submodels:
- Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2002 Lincoln LS Strut
Part Number: BU2Z-18V124-Q
Product Specifications
- Other Name: Shock Absorber Assembly
- Base No.: 18124
- Item Weight: 7.50 Pounds
- Item Dimensions: 3.9 x 4.1 x 24.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BU2Z-18V124-Q
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Lincoln LS Submodels:
- Base, LSE | 8 Cyl 3.9 L GAS
View related parts
2002 Lincoln LS Strut
Part Number: 5U2Z-18V124-H
Product Specifications
- Other Name: Kit - Shock Absorber
- Replaces: XW4Z-18124-FA, XW4Z-18124-BA, XW4Z-18124-AA, XW4Z-18124-EA
- Base No.: 18124
- Item Weight: 7.80 Pounds
- Item Dimensions: 23.9 x 5.7 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5U2Z-18V124-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Lincoln LS Submodels:
- Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2002 Lincoln LS Strut
Part Number: 1W4Z-18124-FA
Product Specifications
- Other Name: Shock Absorber Assembly
- Manufacturer Note: BROWN
- Base No.: 18124
- Item Weight: 7.50 Pounds
- Item Dimensions: 27.0 x 4.5 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 1W4Z-18124-FA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Lincoln LS Submodels:
- Base, LSE | 8 Cyl 3.9 L GAS
View related parts
2002 Lincoln LS Strut
Part Number: 1W4Z-18124-EA
Product Specifications
- Other Name: Shock Absorber Assembly
- Manufacturer Note: Silver
- Base No.: 18124
- Item Weight: 9.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 1W4Z-18124-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Lincoln LS Submodels:
- Base, LSE | 6 Cyl 3.0 L GAS
View related parts
2002 Lincoln LS Shock Absorber
Part Number: 5U2Z-18V125-VA
Product Specifications
- Other Name: Kit - Shock Absorber; Strut
- Base No.: 18125
- Item Weight: 6.70 Pounds
- Item Dimensions: 5.1 x 5.1 x 22.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5U2Z-18V125-VA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Lincoln LS Submodels:
- Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS

2002 Lincoln LS Shock Absorber

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Lincoln LS Shock Absorber available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Lincoln LS Shock Absorber as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Lincoln LS Shock Absorber Parts Questions & Experts Answers

Q: How to service and repair the shock absorber and spring assembly on 2002 Lincoln LS?
A: You should start the shock absorber and spring assembly repair process by removing the wheel together with its tire. Utilize the hex holding function to stabilize the stud before you unfasten the nut then disconnect the stabilizer link bar and dispose of the nut. First disconnect the shock absorber and spring assembly by removing the nut and bolt whereas both parts should be discarded. Rephrase the following sentence. The maintenance starts with lowering the vehicle slightly before taking off the right shock-mount cover followed by removing the retainers then the left shock-mount cover. Maintaining the center nut must remain installed since its removal will create spring tension danger that put people at risk of getting injured. Discard the four nuts before taking out the shock absorber and spring assembly component. Perform part installation only when shock absorber lower bushings contain their end caps. The removal step can be reverted by following specified torque guidelines to maintain correct part retention. Reliability of the suspension system depends on swapping old components with parts using the exact same part number since it minimizes usage of substandard replacement designs.