FordParts
My Garage
My Account
Cart
OEM 2001 Mercury Sable Exhaust Manifold
Engine Exhaust Manifold- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Exhaust Manifolds found
2001 Mercury Sable Exhaust Manifold, Driver Side Part Number: 4F1Z-9431-AA
$132.62 MSRP: $180.47You Save: $47.85 (27%)Product Specifications- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left; Manifold
- Position: Driver Side
- Base No.: 9431
- Item Weight: 11.80 Pounds
- Item Dimensions: 25.1 x 9.9 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F1Z-9431-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left; Manifold
- Position: Driver Side
- Base No.: 9431
- Item Weight: 11.40 Pounds
- Item Dimensions: 20.1 x 9.7 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-9431-GB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Mercury Sable Exhaust Manifold
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Mercury Sable Exhaust Manifold available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Mercury Sable Exhaust Manifold as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2001 Mercury Sable Exhaust Manifold Parts Q&A
- Q: How to service the left-hand side exhaust manifold on 2001 Mercury Sable?A: Service of the left-hand side exhaust manifold starts with removing the LH exhaust manifold to pipe nuts along with the coolant tube bracket bolt. First disconnect the LH Heated Oxygen Sensor (HO2S) electrical connector which connects to the coolant tube while also unclipping the connector. Raise and support the vehicle. The service begins with pin-type retainer and bolt removal together with the front splash shield and continues with lower exhaust manifold nut removal as well as the coolant tube lower bracket bolt. The lower vehicle position gives access to remove upper nuts before removing the exhaust manifold with its original gasket needed for disposal. Place a new gasket in position before installing the exhaust manifold by using the sequence of specified nut tightening. After relocating the coolant tubes use a wrench to tighten the bolt while attaching the LH HO2S electroical connector and installing the LH exhaust manifold to pipe nuts. Proceed by uplifting the vehicle to install the coolant tube lower bracket bolt while concluding the process by placing and securing the front splash shield through bolt and pin-type retainer fasteners.