FordParts
My Garage
My Account
Cart
OEM 2001 Mercury Sable Shock Absorber
Suspension Shock Absorber- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Shock Absorbers found
2001 Mercury Sable Strut, Front Passenger Side Part Number: 3F1Z-18124-CB
$109.38 MSRP: $183.64You Save: $74.26 (41%)Product Specifications- Other Name: Shock Absorber Assembly; Front Right Suspension Strut Kit; Complete Strut
- Manufacturer Note: RH, 3.0L, 12V & 24V, FROM 1/31/2003 TO 12/15/03, A Motorcraft loaded strut can be used in place of this part.
- Position: Front Passenger Side
- Replaces: 4F1Z-18124-AC, YF1Z-18124-CB, AST-109
- Base No.: 18124
- Item Weight: 10.70 Pounds
- Item Dimensions: 7.7 x 7.6 x 25.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F1Z-18124-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Mercury Sable Strut, Rear Part Number: 3F1Z-18125-DA
$85.19 MSRP: $115.92You Save: $30.73 (27%)Product Specifications- Other Name: Shock Absorber Assembly; Suspension Strut, Rear; Suspension Strut Assembly Kit; Complete Strut Kit; Complete Strut
- Manufacturer Note: RH & LH, BEFORE 01/06/2004, A Motorcraft loaded strut can be used in place of this part.
- Position: Rear
- Replaces: AST-152, 5F1Z-18125-AA, 4F1Z-18125-AA, AST-110, YF1Z-18125-DA
- Base No.: 18125
- Item Weight: 11.60 Pounds
- Item Dimensions: 27.0 x 7.5 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 3F1Z-18125-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Mercury Sable Strut, Front Driver Side Part Number: 3F1Z-18124-CA
$78.08 MSRP: $131.09You Save: $53.01 (41%)Product Specifications- Other Name: Shock Absorber Assembly - Front; Front Left Suspension Strut Kit; Complete Strut Assembly.
- Manufacturer Note: LH, 3.0L, 12V & 24V, FROM 1/31/2003 TO 12/15/03, A Motorcraft loaded strut can be used in place of this part.
- Position: Front Driver Side
- Replaces: YF1Z-18124-CA
- Base No.: 18124
- Item Weight: 10.90 Pounds
- Item Dimensions: 7.5 x 6.4 x 23.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F1Z-18124-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Mercury Sable Shock, Rear Part Number: YF1Z-18125-C
Product Specifications- Other Name: Kit - Shock Absorber; Suspension Shock Absorber, Rear; Shock Absorber; Strut
- Position: Rear
- Replaces: YF1Z-18125-B, AA-480, ASH-24592, YF1Z-18125-AA
- Base No.: 18125
- Item Weight: 4.40 Pounds
- Item Dimensions: 23.4 x 3.9 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-18125-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Mercury Sable Shock Absorber
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Mercury Sable Shock Absorber available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Mercury Sable Shock Absorber as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2001 Mercury Sable Shock Absorber Parts Q&A
- Q: How to service the shock absorber on a wagon on 2001 Mercury Sable?A: The wagon shock absorber service begins by getting the vehicle ready using these steps: remove the access panels from the rear compartment followed by taking off the wheel combined with its tire. The rear suspension arm and bushing need a suitable jack stand for support during the procedure to avoid connected component damage. The shock absorber rod requires a wrench to maintain position during nut removal since pliers can damage its surface. A 15-mm crows-foot wrench with ratchet tool should be employed to take out the nut and its components such as washer and rubber insulator. You will need significant force to take gas-filled shock absorbers out from the rear wheel spindle. To service the shock absorber properly first discard the bolt and then remove the unit. Reverse this procedure during installation by replacing the parts with new ones numbered as in the original and adjust reassembly torque to secure all elements properly.