FordParts
My Garage
My Account
Cart
OEM 2002 Mercury Sable Shock Absorber
Suspension Shock Absorber- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Shock Absorbers found
2002 Mercury Sable Strut, Front Passenger Side
Part Number: 3F1Z-18124-CB$109.38 MSRP: $183.64You Save: $74.26 (41%)Product Specifications- Other Name: Shock Absorber Assembly; Front Right Suspension Strut Kit; Complete Strut
- Manufacturer Note: RH, 3.0L, 12V & 24V, FROM 1/31/2003 TO 12/15/03, A Motorcraft loaded strut can be used in place of this part.
- Position: Front Passenger Side
- Replaces: 4F1Z-18124-AC, YF1Z-18124-CB, AST-109
- Base No.: 18124
- Item Weight: 10.70 Pounds
- Item Dimensions: 7.7 x 7.6 x 25.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F1Z-18124-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Mercury Sable Strut, Rear
Part Number: 3F1Z-18125-DA$85.19 MSRP: $115.92You Save: $30.73 (27%)Product Specifications- Other Name: Shock Absorber Assembly; Suspension Strut, Rear; Suspension Strut Assembly Kit; Complete Strut Kit; Complete Strut
- Manufacturer Note: RH & LH, BEFORE 01/06/2004, A Motorcraft loaded strut can be used in place of this part.
- Position: Rear
- Replaces: AST-152, 5F1Z-18125-AA, 4F1Z-18125-AA, AST-110, YF1Z-18125-DA
- Base No.: 18125
- Item Weight: 11.60 Pounds
- Item Dimensions: 27.0 x 7.5 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 3F1Z-18125-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Mercury Sable Strut, Front Driver Side
Part Number: 3F1Z-18124-CA$78.08 MSRP: $131.09You Save: $53.01 (41%)Product Specifications- Other Name: Shock Absorber Assembly - Front; Front Left Suspension Strut Kit; Complete Strut Assembly.
- Manufacturer Note: LH, 3.0L, 12V & 24V, FROM 1/31/2003 TO 12/15/03, A Motorcraft loaded strut can be used in place of this part.
- Position: Front Driver Side
- Replaces: YF1Z-18124-CA
- Base No.: 18124
- Item Weight: 10.90 Pounds
- Item Dimensions: 7.5 x 6.4 x 23.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F1Z-18124-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Mercury Sable Shock, Rear
Part Number: YF1Z-18125-CProduct Specifications- Other Name: Kit - Shock Absorber; Suspension Shock Absorber, Rear; Shock Absorber; Strut
- Position: Rear
- Replaces: YF1Z-18125-B, AA-480, ASH-24592, YF1Z-18125-AA
- Base No.: 18125
- Item Weight: 4.40 Pounds
- Item Dimensions: 23.4 x 3.9 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-18125-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Mercury Sable Shock Absorber
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Mercury Sable Shock Absorber available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Mercury Sable Shock Absorber as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2002 Mercury Sable Shock Absorber Parts Questions & Experts Answers
- Q: What Precautions Should Be Taken When Removing and Installing the Front Shock Absorber and Spring Assembly on 2002 Mercury Sable?A: It is necessary to exercise caution when handling the front suspension strut and spring assembly due to its gas-pressurized shock absorbers because these extend automatically without assistance; heat or flame must be avoided to protect yourself from harm. The integrity of essential systems depends on suspension fasteners so replacement parts must belong to the same specification and use specified torque values during reassembly for achieving optimal retention. Start your procedure by setting position 1 on the ignition before taking out the wheel knuckle yet keeping the wheel hub and bearing and disc brake dust shield connected. Immediately before discarding the link nut begin by untightening it while using the hex feature to secure the ball joint from rotation and finally disconnect the link. Climb underneath the vehicle after removing the brake hose bracket then lower it to obtain access to the strut and spring assembly-to-body nuts and the washer hose retainer when necessary. The nuts need removal before extracting the strut assembly together with its spring components. Use a proper spring compressor device to make the spring short at first then unscrew the nut under strut rod stability after loosening the tension while holding the strut rod before you discard the nut and eliminate the cupped washer with upper mount and seat-bearing assembly. Check the upper mount and seat-bearing assembly for any damage then replace both if the spring insulator is cracked, torn or distorted along with the bearing that fails to freely rotate. Assemble the mount washers with their cupped sides directed toward the mount and seat-bearing assembly while avoiding excessive torque on the strut rod lock nut to prevent damages. Install the spring correctly into both spring seats while performing installation by following the removal procedures in reverse order.
Related 2002 Mercury Sable Parts
2002 Mercury Sable Axle Beam
2002 Mercury Sable Ball Joint
2002 Mercury Sable Coil Spring Insulator
2002 Mercury Sable Control Arm
2002 Mercury Sable Control Arm Bushing
2002 Mercury Sable Front Cross-Member
2002 Mercury Sable Shock And Strut Mount
2002 Mercury Sable Spindle
2002 Mercury Sable Steering Knuckle
2002 Mercury Sable Sway Bar Bushing
2002 Mercury Sable Sway Bar Kit
2002 Mercury Sable Sway Bar Link