FordParts
My Garage
My Account
Cart
OEM 2002 Ford E-250 Econoline Brake Pads
Disc Brake Pad Set- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Brake Pads found
2002 Ford E-250 Econoline Rear Pads Part Number: 6C2Z-2200-C
$45.79 MSRP: $66.65You Save: $20.86 (32%)Product Specifications- Other Name: Kit - Brake Shoe And Hardware; Disc Brake Pad Set, Rear; Brake Pads; Kit - Brake Shoe And Lining; Disc Brake Pad Set
- Position: Rear
- Replaced by: YU2Z-2V200-BA
- Base No.: 2200
- Item Weight: 6.70 Pounds
- Item Dimensions: 3.4 x 5.1 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-2200-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Ford E-250 Econoline Front Pads Part Number: 4C2Z-2001-CA
Product Specifications- Other Name: Kit - Brake Shoe; Brake Pads
- Manufacturer Note: Shoe and lining kit(brake) - 1995/2001 - before 2/13/01
- Replaces: 1C2Z-2001-AA
- Base No.: 2001
- Item Weight: 7.00 Pounds
- Item Dimensions: 4.3 x 5.1 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C2Z-2001-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Ford E-250 Econoline Brake Pads
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford E-250 Econoline Brake Pads available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford E-250 Econoline Brake Pads as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2002 Ford E-250 Econoline Brake Pads Parts Q&A
- Q: How to service and repair the rear brake pads on 2002 Ford E-250 Econoline?A: Service and repair of rear brake pads on E-250/350 vans requires starting by removing the brake master cylinder cap to check reservoir fluid levels and draining excess fluid to halfway. Ascend the vehicle to an appropriate height with safety supports in place before you uninstall both wheel and tire elements. The inspection of brake pads should determine if they show indications of wear along with contamination or fail to meet specifications. Replace the components with new ones when any of these failures occur. Take off the caliper pin bolts while conducting sufficient support for the rear disc brake caliper to stay off the brake hose until the complete caliper removal. To check rear brake disc specifications obtain the brake pads and rail clips first and measure the brake disc thickness before replacing the disc with a new one if required. The disc brake caliper must be inspected for possible leaks and disassembly becomes necessary in case leaks are detected. End the repair task by following the existing removal approach in reverse order during installation.