How to service and repair the A/C condenser on 2002 Ford F-350 Super Duty?

Leak-test a suspected A/C condenser core. Install a suction accumulator if contaminated or damaged. Recover refrigerant, remove retainers, sight shield and deflector, disconnect lines, reposition hood latch, remove bracket screws and lift out condenser. Reverse to install, fit new O-rings in clean PAG oil, lubricate, evacuate, leak-test and charge.

OEM 2002 Ford F-350 Super Duty A/C Condenser

Air Conditioning Condenser

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 A/C Condenser found

View related parts
2002 Ford F-350 Super Duty Condenser Part Number: 6C3Z-19712-AB
Product Specifications
- Other Name: Kit - Air Conditioning Condenser; A/C Condenser
- Replaces: F81Z-19712-AA, 6C3Z-19712-AA, YJ-472
- Base No.: 19712
- Item Weight: 13.30 Pounds
- Item Dimensions: 27.5 x 6.2 x 38.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C3Z-19712-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL

2002 Ford F-350 Super Duty A/C Condenser

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford F-350 Super Duty A/C Condenser available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford F-350 Super Duty A/C Condenser as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Ford F-350 Super Duty A/C Condenser Parts Q&A

Q: How to service and repair the A/C condenser on 2002 Ford F-350 Super Duty?
A: Leak-test a suspected A/C condenser core. Install a suction accumulator if contaminated or damaged. Recover refrigerant, remove retainers, sight shield and deflector, disconnect lines, reposition hood latch, remove bracket screws and lift out condenser. Reverse to install, fit new O-rings in clean PAG oil, lubricate, evacuate, leak-test and charge.