Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2002 Ford Mustang Axle Shaft

Car Axle Shaft
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Axle Shafts found

  • 2002 Ford Mustang Axle Shaft - 2R3Z-4K138-A
    2002 Ford Mustang Axle Shaft Diagram - 2R3Z-4K138-A
    View related parts

    2002 Ford Mustang Axle Assembly, Rear Passenger Side Part Number: 2R3Z-4K138-A

    Product Specifications
    • Other Name: Shaft Assembly; CV Axle Assembly, Rear Left, Rear Right; CV Axle Assembly; GSP CV Axle; Axle Shaft
    • Position: Rear Passenger Side
    • Replaces: 1R3Z-4K138-AA, 2R3Z-4K138-AA
    • Item Weight: 35.00 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 2R3Z-4K138-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2002 Ford Mustang Submodels:
    • Base, GT, GT Bullitt, Mach 1, SVT Cobra, SVT Cobra 10th Anniversary | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
  • 2002 Ford Mustang Axle Shaft - XR3Z-4234-BA
    2002 Ford Mustang Axle Shaft Diagram - XR3Z-4234-BA
    View related parts

    2002 Ford Mustang Axle Shafts, Rear Part Number: XR3Z-4234-BA

    Product Specifications
    • Other Name: Shaft Assembly - Rear Axle; Drive Axle Shaft, Rear; Axle Shaft Assembly; Axle Shaft
    • Manufacturer Note: without ABS
    • Position: Rear
    • Base No.: 4234
    • Item Weight: 24.00 Pounds
    • Item Dimensions: 40.8 x 8.6 x 8.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • Require Quantity: 2
    • SKU: XR3Z-4234-BA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2002 Ford Mustang Submodels:
    • Base, GT, GT Bullitt, Mach 1, SVT Cobra, SVT Cobra 10th Anniversary | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
  • 2002 Ford Mustang Axle Shaft - XR3Z-4234-AA
    2002 Ford Mustang Axle Shaft Diagram - XR3Z-4234-AA
    View related parts

    2002 Ford Mustang Axle Shafts, Rear Part Number: XR3Z-4234-AA

    Product Specifications
    • Other Name: Shaft Assembly - Rear Axle; Drive Axle Shaft, Rear; Axle Shaft Assembly; Axle Shaft
    • Manufacturer Note: with ABS
    • Position: Rear
    • Base No.: 4234
    • Item Weight: 19.30 Pounds
    • Item Dimensions: 39.3 x 8.4 x 8.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • Require Quantity: 2
    • SKU: XR3Z-4234-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2002 Ford Mustang Submodels:
    • Base, GT, GT Bullitt, Mach 1, SVT Cobra, SVT Cobra 10th Anniversary | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS

2002 Ford Mustang Axle Shaft

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford Mustang Axle Shaft available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford Mustang Axle Shaft as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Ford Mustang Axle Shaft Parts Q&A

  • Q: How to service and repair the 7.5-inch ring gear axle shaft on 2002 Ford Mustang?
    A: The repair process of 7.5-inch ring gear axle shaft begins with vehicle suspension followed by wheel and tire removal and finally removing the rear brake disc. You need to drain lubricating fluid from the differential housing by taking out its cover before you remove the differential pinion shaft lock bolt to separate the differential pinion shaft. When removing the U-washer you must pay attention to the rubber O-ring in the axle shaft groove to avoid damaging it. To accomplish this push the axle shafts toward the inside of the component. Stroke the rear brake anti-lock sensor out carefully to ensure it stays undamaged before withdrawing the axle shaft. During wheel bearing oil seal installation use Premium Long-Life Grease XG-1-C or Ford specification ESA-M1C75-B equivalent products which should be applied along the lip of the seal but should not harm the seal. The fitting procedure includes installing axle shafts with their U-washers positioned on the button end and the axle pulled outward. When new lock bolts are unavailable for the differential pinion shaft installation process you must apply Threadlock and Sealer EOAZ-19554-AA which meets Ford specification WSK-M2G351-A5 or similar product before securing a new lock bolt after shaft alignment with the case lock bolt hole. The procedure ends with the differential housing cover replacement followed by providing the specified lubricant in the rear axle and finishing with reinstallation of the rear brake anti-lock sensor along with the rear brakes and tire-wheel assembly before lifting the vehicle.

Related 2002 Ford Mustang Parts

Alternate Year Models

+
2001 Ford Mustang Axle Shaft 2003 Ford Mustang Axle Shaft