How to service and repair the lower control arm on a wagon on 2002 Ford Taurus?

Starting the lower control arm service and repair on a wagon requires the removal of the spring component first. The first step to serve the LH rear parking brake cable retainer of the arm is to disconnect both rear wheel speed sensor wiring clips before detaching the bolt. Detaching the lower arm begins with Nut and Flag bolt removal which requires discarding the removed hardware. The installation steps should be reversed following removal while using a replacement nut along with a new flag bolt. Fall arrest of the lower arm-to-body nut at ride height is essential during spring installation since failure at this stage can trigger severe service costs from performance-damaging vital system components. Using new components with matching part numbers or equivalent parts will allow correct retention through strict adherence to specified torque values.

OEM 2002 Ford Taurus Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Control Arms found

View related parts
2002 Ford Taurus Control Arm, Rear Driver Side
Part Number: 1F1Z-5500-FL
Product Specifications
- Other Name: Arm Assembly - Rear Suspension; Suspension Control Arm, Rear Left Forward; Front Lower Control Arm; Suspension Control Arm
- Manufacturer Note: LH,Used on front or rear, has bushing to accept 5K751 adjusting cam.
- Position: Rear Driver Side
- Replaces: YF1Z-5500-FL
- Base No.: 5500
- Item Weight: 5.90 Pounds
- Item Dimensions: 33.3 x 6.1 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1F1Z-5500-FL
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2002 Ford Taurus Lower Control Arm, Front Passenger Side
Part Number: F8DZ-3078-AB
Product Specifications
- Other Name: Arm Assembly - Front Suspension; Suspension Control Arm, Front Right; Suspension Control Arm; Control Arm
- Manufacturer Note: R.H., The forward bushing has a 14.2mm inner diameter, the rearward has a 14.2mm inner diameter bushing. The ball joint serviced in 3K185/3K186, FROM 05/13/98 TO 04/08/03
- Position: Front Passenger Side
- Base No.: 3078
- Item Weight: 10.50 Pounds
- Item Dimensions: 15.5 x 2.5 x 21.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8DZ-3078-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
2002 Ford Taurus Lower Control Arm, Front Driver Side
Part Number: F8DZ-3079-AB
Product Specifications
- Other Name: Arm Assembly - Front Suspension; Suspension Control Arm, Front Left; Suspension Control Arm; Control Arm
- Position: Front Driver Side
- Base No.: 3079
- Item Weight: 10.30 Pounds
- Item Dimensions: 15.8 x 2.6 x 21.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8DZ-3079-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
2002 Ford Taurus Upper Control Arm, Rear Driver Side
Part Number: F6DZ-5500-DB
Product Specifications
- Other Name: Arm Assembly - Rear Suspension; Suspension Control Arm, Rear Left Upper; Suspension Control Arm; Control Arm
- Manufacturer Note: LH, UPPER
- Position: Rear Upper Driver Side
- Base No.: 5500
- Item Weight: 15.20 Pounds
- Item Dimensions: 19.6 x 7.0 x 13.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F6DZ-5500-DB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Taurus Submodels:
- G, GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
2002 Ford Taurus Upper Control Arm, Rear Passenger Side
Part Number: F6DZ-5500-CB
Product Specifications
- Other Name: Arm Assembly - Rear Suspension; Suspension Control Arm, Rear Right Upper; Suspension Control Arm; Control Arm
- Manufacturer Note: RH, Upper
- Position: Rear Upper Passenger Side
- Base No.: 5500
- Item Weight: 14.90 Pounds
- Item Dimensions: 19.4 x 7.2 x 13.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F6DZ-5500-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Taurus Submodels:
- G, GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS

2002 Ford Taurus Control Arm

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford Taurus Control Arm available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford Taurus Control Arm as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Ford Taurus Control Arm Parts Questions & Experts Answers

Q: How to service and repair the lower control arm on a wagon on 2002 Ford Taurus?
A: Starting the lower control arm service and repair on a wagon requires the removal of the spring component first. The first step to serve the LH rear parking brake cable retainer of the arm is to disconnect both rear wheel speed sensor wiring clips before detaching the bolt. Detaching the lower arm begins with Nut and Flag bolt removal which requires discarding the removed hardware. The installation steps should be reversed following removal while using a replacement nut along with a new flag bolt. Fall arrest of the lower arm-to-body nut at ride height is essential during spring installation since failure at this stage can trigger severe service costs from performance-damaging vital system components. Using new components with matching part numbers or equivalent parts will allow correct retention through strict adherence to specified torque values.