OEM 2002 Ford Windstar Ignition Lock Cylinder

2002 Ford Windstar Ignition Lock Cylinder Parts Questions & Experts Answers

• Q: How to Service a Non-Functional Ignition Lock Cylinder on 2002 Ford Windstar?

  A: You must begin servicing a non-functional ignition switch lock cylinder by ensuring front wheels point straight ahead then you must disconnect the battery ground cable and let the restraint system back up power supply deplete for at least one minute. Switching off the SRS system will stop serious personal injury from happening. The first step is to detach the steering wheel assembly before twisting off the cover from the ignition switch cylinder. The lock cylinder replacement process requires the old cylinder disposal followed by new cylinder builder use of lock repair package F85Z-11582-AA for matching the key code against vehicle specifications. Drill a 1/8-inch diameter hole through the lock cylinder retaining pin before drilling a 3/8-inch hole down the center of the ignition lock key slot to break loose the lock cylinder. Eliminate the previous ignition switch lock cylinder before eliminating all drill debris inside the steering column. Remove the bearing retainer and the bearing and gear from the steering column while checking for damage after cleaning every drill shaving from the steering column. Complete the installation by installing a new ignition switch lock cylinder then check the system function after reversal of the removal steps. The final step for completing this procedure involves turning on the supplemental restraint system (SRS).