How to Service and Repair the Front Door Latch Assembly on a Single Latch Door on 2003 Ford E-250?

A single latch door requires beginning repair work by removing the door trim panel together with watershield materials. The front door requires removal of its latch remote control. To gain access to side hinged or rear doors you must remove the retaining nuts and inside handle together with the bezel. Service technicians should drill the power door lock actuator rivet as part of their installation process. You should disconnect the lock cylinder rod from the lock cylinder lever for front and side hinged doors at the same time as disconnecting the outside door handle-to-latch rod at the door latch. The license plate housing screws require removal before pulling the housing away from the door space then disconnecting both the handle-to-latch cable at the door handle and the lock cylinder rod at the lock cylinder. Proceed to eliminate the door latch retaining bolts. The removal of the door latch remote control screw is necessary for both side hinged and rear doors. The front door needs complete removal of its door latch and latch remote control cable as well as lock cylinder rod and push-button rod and power door lock actuator as an assembly. To remove door latches on side hinged and rear doors the technician must disconnect these components: door latch, door latch remote control and cable(s), lock cylinder rod, push-button rod, and power door lock actuator as an assembly. The proper installation process will occur by reversing the removal methods.

OEM 2003 Ford E-250 Door Latch Assembly

Door Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Door Latch Assemblys found

View related parts
2003 Ford E-250 Latch Assembly, Front Center Part Number: 8C2Z-15264A00-D
$151.55 MSRP: $220.60
You Save: $69.05 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Remote Control System; Door Latch Assembly, Center Front; Door Latch Assembly; Door Lock; Lock; Latch
- Position: Front Center
- Replaces: 4C2Z-15264A00-AB, 8C2Z-15264A00-B, 6C2Z-15264A00-AA
- Item Weight: 4.30 Pounds
- Item Dimensions: 18.7 x 12.1 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-15264A00-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2003 Ford E-250 Lock, Rear Driver Side Part Number: 6C2Z-1543286-AA
$70.55 MSRP: $102.70
You Save: $32.15 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Latch Assembly - Tailgate; Door Latch Cable, Rear Left, Rear Left Upper; Door Latch Assembly; Cable; Door Latch Cable
- Manufacturer Note: Latch and Cable Assy
- Position: Rear Driver Side
- Replaces: F8UZ-1543286-AA
- Base No.: 43286
- Item Weight: 1.20 Pounds
- Item Dimensions: 9.1 x 8.4 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-1543286-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2003 Ford E-250 Lock Assembly, Lower Part Number: 6C2Z-15264A32-AA
$41.78 MSRP: $60.82
You Save: $19.04 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch; Sliding Door Latch, Lower; Door Latch Assembly; Door Lock; Lower Latch; Lock
- Position: Lower
- Replaces: F2UZ-15264A32-B
- Base No.: 264A32
- Item Weight: 1.00 Pounds
- Item Dimensions: 6.1 x 4.5 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-15264A32-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2003 Ford E-250 Latch Assembly, Front Driver Side Part Number: 6C2Z-1521813-A
$113.65 MSRP: $165.43
You Save: $51.78 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Latch; Door Latch Assembly, Front Left, Front Right; Door Lock; Lock; Door Latch Assembly
- Position: Front Driver Side
- Replaces: 4C2Z-1521813-AA
- Base No.: 21813
- Item Weight: 1.10 Pounds
- Item Dimensions: 5.1 x 4.5 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-1521813-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2003 Ford E-250 Remote Control, Front Center Part Number: AC2Z-15264A26-B
$55.09 MSRP: $80.18
You Save: $25.09 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch; Door Latch Assembly, Center Front; Door Lock; Upper Latch; Lock; Cable; Door Latch Assembly
- Manufacturer Note: Rear
- Position: Front Center
- Replaces: 6C2Z-15264A26-AA, F2UZ-15264A26-B, AC2Z-15264A26-A
- Base No.: 264A26
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.1 x 2.9 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AC2Z-15264A26-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2003 Ford E-250 Lower Latch Part Number: F2UZ-15264A32-A
$139.42 MSRP: $202.93
You Save: $63.51 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch; Door Latch Assembly; Door Lock; Lock
- Manufacturer Note: w/hinged side doors
- Position: Lower
- Base No.: 264A32
- Item Weight: 1.10 Pounds
- Item Dimensions: 8.3 x 6.1 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F2UZ-15264A32-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2003 Ford E-250 Lock Actuator, Front Part Number: F7UZ-15218A42-A
Product Specifications
- Other Name: Actuator Assembly; Door Lock Actuator Motor, Front Left/Right; Actuator
- Position: Front
- Replaces: F5UZ-15218A42-A
- Base No.: 218A42
- Item Weight: 0.70 Pounds
- Item Dimensions: 12.6 x 2.5 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F7UZ-15218A42-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

2003 Ford E-250 Door Latch Assembly

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford E-250 Door Latch Assembly available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford E-250 Door Latch Assembly as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford E-250 Door Latch Assembly Parts Q&A

Q: How to Service and Repair the Front Door Latch Assembly on a Single Latch Door on 2003 Ford E-250?
A: A single latch door requires beginning repair work by removing the door trim panel together with watershield materials. The front door requires removal of its latch remote control. To gain access to side hinged or rear doors you must remove the retaining nuts and inside handle together with the bezel. Service technicians should drill the power door lock actuator rivet as part of their installation process. You should disconnect the lock cylinder rod from the lock cylinder lever for front and side hinged doors at the same time as disconnecting the outside door handle-to-latch rod at the door latch. The license plate housing screws require removal before pulling the housing away from the door space then disconnecting both the handle-to-latch cable at the door handle and the lock cylinder rod at the lock cylinder. Proceed to eliminate the door latch retaining bolts. The removal of the door latch remote control screw is necessary for both side hinged and rear doors. The front door needs complete removal of its door latch and latch remote control cable as well as lock cylinder rod and push-button rod and power door lock actuator as an assembly. To remove door latches on side hinged and rear doors the technician must disconnect these components: door latch, door latch remote control and cable(s), lock cylinder rod, push-button rod, and power door lock actuator as an assembly. The proper installation process will occur by reversing the removal methods.