How to service the LH exhaust manifold on 2004 Ford Escape?

Begin LH exhaust manifold servicing by taking off the LH heated oxygen sensor (HO2S) and LH catalyst monitor and then the bolts as well as splash shield. Move on to detach the nuts while placing the exhaust crossover component to a safe location. Use a clockwise motion on the accessory drive belt tensioner to remove the belt before unbolting the A/C compressor while setting it to the side. The next step involves removing nuts from the LH exhaust manifold together with discarding its gasket. Install new gasket onto the exhaust manifold before using the specific tightening sequence that helps with proper installation. Reinstall the A/C compressor while tightening its bolts and use the accessory drive belt tensioner to put on the belt by rotating it clockwise. Proceed with reinstalling the exhaust crossover and install its nuts before adding the splash shield. The LH HO2S along with the LH catalyst monitor need to be reinstalled last.

OEM 2004 Ford Escape Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Exhaust Manifolds found

View related parts
2004 Ford Escape Exhaust Manifold, Driver Side
Part Number: 5L8Z-5G232-EA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Catalytic Converter with Integrated Exhaust Manifold; Manifold Converter; Manifold
- Position: Driver Side
- Base No.: 9430A
- Item Weight: 13.40 Pounds
- Item Dimensions: 18.9 x 14.6 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-5G232-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Escape Submodels:
- Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 6 Cyl 3.0 L GAS
View related parts
2004 Ford Escape Exhaust Manifold, Passenger Side
Part Number: 5L8Z-5G232-CC
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter with Integrated Exhaust Manifold; Manifold Converter; Manifold
- Position: Passenger Side
- Base No.: 9430B
- Item Weight: 19.70 Pounds
- Item Dimensions: 17.4 x 13.6 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-5G232-CC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Escape Submodels:
- Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 6 Cyl 3.0 L GAS
View related parts
2004 Ford Escape Exhaust Manifold
Part Number: XS4Z-9430-AA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Manifold
- Base No.: 9430
- Item Weight: 9.60 Pounds
- Item Dimensions: 17.7 x 13.6 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XS4Z-9430-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Escape Submodels:
- Limited, XLS, XLT | 4 Cyl 2.0 L GAS

2004 Ford Escape Exhaust Manifold

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford Escape Exhaust Manifold available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford Escape Exhaust Manifold as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Ford Escape Exhaust Manifold Parts Questions & Experts Answers

Q: How to service the LH exhaust manifold on 2004 Ford Escape?
A: Begin LH exhaust manifold servicing by taking off the LH heated oxygen sensor (HO2S) and LH catalyst monitor and then the bolts as well as splash shield. Move on to detach the nuts while placing the exhaust crossover component to a safe location. Use a clockwise motion on the accessory drive belt tensioner to remove the belt before unbolting the A/C compressor while setting it to the side. The next step involves removing nuts from the LH exhaust manifold together with discarding its gasket. Install new gasket onto the exhaust manifold before using the specific tightening sequence that helps with proper installation. Reinstall the A/C compressor while tightening its bolts and use the accessory drive belt tensioner to put on the belt by rotating it clockwise. Proceed with reinstalling the exhaust crossover and install its nuts before adding the splash shield. The LH HO2S along with the LH catalyst monitor need to be reinstalled last.