How to service and repair the radiator cooling fan motor and shroud on 2005 Ford Escape?

The first step to repair the radiator cooling fan motor and shroud requires you to position the vehicle on a hoist with neutral transmission setting. Your work starts with removing the radiator grille together with the front impact severity sensor. You will need to remove the four bolts and two radiator brackets which require tightening to 10 Nm (89 inch lbs.) when reinstalling them. The technician must detach the lower bolt that supports the center section before tightening it to 10 Nm (89 inch lbs.) when reinstalling it. Connectors must be removed from the fan before the nut and center support before reinstallation by applying torque to 10 Nm (89 inch lbs.). Disconnect the cooling fan electrical connectors before removing the six cooling fan bolts that need to be tightened to 10 Nm (89 inch lbs.) for installation. The left-hand cooling fan requires removal first followed by moving the right-hand cooling fan towards the left for extraction. The installation of cooling fans should follow the reverse sequence of removal steps.

OEM 2005 Ford Escape Fan Motor

Cooling Fan Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Fan Motors found

View related parts
2005 Ford Escape Fan & Motor Part Number: 5M6Z-8C607-AH
$1159.93 MSRP: $1926.00
You Save: $766.07 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor And Fan Assembly - Engine Cooling; Dual Radiator and Condenser Fan Assembly; Fan Blade; Fan Assembly; Cooling Fan Assembly
- Base No.: 8C607
- Item Weight: 15.60 Pounds
- Item Dimensions: 6.0 x 37.8 x 22.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5M6Z-8C607-AH
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Escape Submodels:
- Hybrid, Limited Hybrid, XLS, XLT | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
2005 Ford Escape Fan & Motor Part Number: 5L8Z-8C607-GD
Product Specifications
- Other Name: Fan and Motor Assembly; Engine Cooling Fan; Dual Radiator and Condenser Fan; Fan Motor; Radiator Fan; Fan Blade; Fan Assembly; Cooling Fan Assembly
- Manufacturer Note: RH/LH
- Base No.: 8C607
- Item Weight: 15.80 Pounds
- Item Dimensions: 24.5 x 6.3 x 36.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-8C607-GD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Escape Submodels:
- Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 6 Cyl 3.0 L GAS
View related parts
2005 Ford Escape Fan & Motor Part Number: 5L8Z-8C607-BF
Product Specifications
- Other Name: Fan and Motor Assembly; Engine Cooling Fan; Dual Radiator and Condenser Fan; Radiator Fan Assembly; Fan Blade; Fan Assembly; Cooling Fan Assembly
- Base No.: 8C607
- Item Weight: 16.40 Pounds
- Item Dimensions: 25.2 x 6.1 x 37.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-8C607-BF
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Escape Submodels:
- Hybrid, XLS, XLT, XLT No Boundaries | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS

2005 Ford Escape Fan Motor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Escape Fan Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Escape Fan Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Escape Fan Motor Parts Q&A

Q: How to service and repair the radiator cooling fan motor and shroud on 2005 Ford Escape?
A: The first step to repair the radiator cooling fan motor and shroud requires you to position the vehicle on a hoist with neutral transmission setting. Your work starts with removing the radiator grille together with the front impact severity sensor. You will need to remove the four bolts and two radiator brackets which require tightening to 10 Nm (89 inch lbs.) when reinstalling them. The technician must detach the lower bolt that supports the center section before tightening it to 10 Nm (89 inch lbs.) when reinstalling it. Connectors must be removed from the fan before the nut and center support before reinstallation by applying torque to 10 Nm (89 inch lbs.). Disconnect the cooling fan electrical connectors before removing the six cooling fan bolts that need to be tightened to 10 Nm (89 inch lbs.) for installation. The left-hand cooling fan requires removal first followed by moving the right-hand cooling fan towards the left for extraction. The installation of cooling fans should follow the reverse sequence of removal steps.